• Energy Research
• Closed Access close
• Restricted close
• Open Source close
• Embargo close
• 13. Climate action close
• SE close
• RU close

The delayed harvest system for grass crops in which the harvest of the previous year's crop is undertaken after it has over-wintered in the field significantly improves the fuel quality for both combustion and gasification. The critical elements that cause fouling and corrosion problems in boilers are alkali and chlorine which are released during combustion. The concentrations of these are reduced by a factor of 2 to 6 by using the delayed harvest system rather than harvesting in the end of the growing season. The loss of some leaf material and leaching of alkali also contributes to an increase in the ash fusion temperature from 1070°C to 1400°C. This work is part of a project in progress involving 14 different field trials distributed all over Sweden. Results are presented demonstrating that ash content is influenced by the type of soil. The most extreme variations are between reed canary grass grown on high clay content soils and those produced on very humic soils, with ash contents of 10.1% and 2.2%, respectively.

Abstract For biomass/waste fueled power plants, stricter regulations require a further reduction of the negative impacts on the environment caused by the release of pollutants and withdrawal of fresh water externally. Flue gas quench (FGQ) is playing an important role in biomass or waste fueled combined heat and power (CHP) plants, as it can link the flue gas (FG) cleaning, energy recovery and wastewater treatment. Enhancing water evaporation can benefit the concentrating of pollutant in the quench water; however, when FG condenser (FGC) is not in use, it results in a large consumption of fresh water. In order to deeply understand the operation of FGQ, a mathematic model was developed and validated against the measurements. Based on simulation results key parameters affecting FGQ have been identified, such as the flow rate and temperature of recycling water and the moisture content of FG. A guideline about how to reduce the discharge of wastewater to the external and the withdrawal of external water can be proposed. The mathematic model was also implemented into an ASPEN Plus model about a CHP plant to assess the impacts of FGQ on CHP. Results show that when the FGC was running, increasing the flow rate and decreasing the temperature of recycling water can result in a lower total energy efficiency.

AbstractNowadays, researchers are focusing on the methods of using recycled industrial/agricultural wastes as raw materials, which are not only economically but also environmentally useful. In the recent years, many scholars have conducted research on the rational use of rice husks (RHs) and found that RHs are rich in inorganic/organic components and used in combination with the certain building materials to produce new green composite building materials. This paper studies the method of using RH processed products and the sodium silicate solution (liquid glass) made from RH ash to produce cheap wood substitute composite materials, which can be improved the insulation performance of the wall greatly. Obtained results are determined by comparing with the properties of standard polymer composite materials such as particleboards, chipboards, and medium‐density fiberboards (MDF). The significance of the work is pointing out by solving the problem of recycling large‐tonnage agricultural waste and reproduce products with the consumer's value.

Over the past three decades, Swedish energy policy has evolved in three major stages—oil reduction, phase-out of nuclear energy, renewable energy—each with a different focus. Since 1977, Swedish law has required municipalities to develop an energy plan that addresses the supply, distribution, and use of energy. Whether such plans have contributed to the development of local energy-systems has been a subject for debate. This paper is based on a study of 12 municipal energy-plans that attempted to control and develop local energy-systems in southern Sweden. The analysis examines how municipalities promote oil reduction, efficient energy use, and the use of renewable energy. The plans varied in planning processes, contents, and level of ambition. The results of the study show that the contents of the plans follow the national energy-policies with respect to reduction of oil use, improved energy efficiency, and increased use of renewable energy.

Abstract This study presents and evaluates the feasibility of a novel hybridization of modified Kalina cycle, reverse osmosis desalination, and low-temperature water electrolysis utilizing geothermal energy to yield power, distilled water, and hydrogen, respectively. The scientific impact of the current work has been improved considering the features of Sabalan flash-binary geothermal wells in Iran as a real model through a case study. In addition to designing a novel setup, the smart use of multi-heat recovery technique, modifying the base cycle, and utilizing a part of generated distilled water to produce hydrogen by the electrolyzer are the other structural originalities, distinguishing the current work from the previous studies. The suggested system is scrutinized via a parametric study and optimized based on a genetic algorithm. The parametric study demonstrated that the highest sensitivity of varying the performance criteria of the whole system is attributed to the change in flash tank pressure. Moreover, the multi-objective optimization led to achieving the exergy efficiency and trigeneration gain output ratio as 51.3% and 1.7 for the system, respectively. Furthermore, the system was able to produce 4795 kW of power, 5.3 kg/h of hydrogen, and 19.9 kg/s of distilled water.

This study examined the potential use of macroalgae epiphytic on mangrove aerial roots as indicators of estuarine contamination. The distribution and abundance of macroalgae was investigated in four estuaries in the vicinity of Sydney, Australia, and compared to water and sediment metal concentrations, nutrient concentrations and physicochemical parameters over four seasonal surveys. Macroalgal diversity and distribution appeared to be highly influenced by the ambient contaminant concentrations, while biomass appeared to be linked with nutrient concentrations. The distribution of the Rhodophyta species, Catenella nipae Zanardini significantly decreased as metal concentrations increased among the estuaries during all seasonal surveys. This species showed strong potential for use as a bioindicator of estuarine contamination.

This paper is a contribution to the discussion on the relation between thermodynamics and economic theory. With respect to thermodynamic constraints on the economy, there are two diametrically opposite positions in this discussion. One claims that the constraints are insignificant (‘of no immediate practical importance for modelling’) and in the intermediate run, do not limit economic activity and, therefore, need not be incorporated in the economic theory. The other holds that thermodynamics tells us that there are practical limits to materials recycling, which already puts bounds on the economy and, therefore, must be included in the economic models. Using the thermodynamic concept of entropy, we show here that there are fundamental problems with both positions. Even in the long run, entropy production associated with material dissipation need not be a limiting factor for economic development. Abundant energy resources from solar radiation may be used to recover dissipated elements. With simple, quantitative analysis we show that the rate of entropy production caused by human economic activities is very small compared to the continuous natural entropy production in the atmosphere and on the Earth’s surface. Further, the societal entropy production is well within the range of natural variation. It is possible to replace part of the natural entropy production with societal entropy production by making use of solar energy. Society consumes resources otherwise available for coming generations. However, future generations need not have less resources available to them than the present generation. Human industrial activities could be transformed into a sustainable system where the more abundant elements are industrially used and recycled, using solar energy as the driving resource. An economic theory, fit to guide industrial society in that development, must not disregard thermodynamics nor must it overstate the consequences of the laws of thermodynamics. © 2001 Elsevier Science B.V. All rights reserved.

Abstract To reduce greenhouse gas (GHG) emissions and fossil fuel consumption, addition of renewable alcohols to Diesel fuel may offer a potential solution. However, use of such alcohol/Diesel blends in existing Diesel engines is not yet fully understood. In the present study, alcohol/Diesel blends were tested by examining engine performance and emissions in both a light duty (LD) engine and a heavy duty (HD) engine with settings typical of those used in production engines. In addition, cold start tests of the blends were performed in a multi-cylinder LD Diesel engine. Four different alcohols were selected to mix with Diesel, i.e. n-butanol, isobutanol, 2-ethylhexanol and n-octanol. These alcohols were blended separately with either hydrotreated vegetable oil (HVO) or di-tertiary-butyl peroxide (DTBP), acting as cetane number (CN) improvers, in Diesel fuel. The mixtures were prepared to have the same CN as Diesel fuel. The results indicated that with similar CN and the same engine settings, the alcohol/Diesel blends and Diesel fuel exhibited the same start of combustion and almost identical heat release processes. The blends generated slightly faster combustion and a higher indicated thermal efficiency than Diesel fuel under most of the tested conditions and in both engines. Diesel blends of n-butanol and 2-ethylhexanol showed good cold start performance in the multi-cylinder LD engine. Results regarding emissions demonstrated that the total particulate matter (PM) number was reduced when using alcohol/Diesel blends and the PM diameter seems to decrease as the amount of oxygen in the fuel was increased in the LD engine. It was concluded that alcohol/Diesel blends produce much less soot than Diesel fuel in both types of engine owing to the higher oxygen content in the blends but cause slightly increased NO formation.

System downtime and unplanned outages massively affect plant productivity; therefore, the reliability, availability, maintainability, and safety (RAMS) disciplines, together with fault diagnosis and condition monitoring (CM), are mandatory in energy applications. This article focuses on the optimization of a maintenance plan for the yaw system used in an onshore wind turbine (WT). A complete reliability-centered maintenance (RCM) procedure is applied to the system to identify which maintenance action is the optimal solution in terms of cost, safety, and availability. The scope of the research is to propose a new customized decision-making diagram inside the RCM assessment to reduce the subjectivity of the procedure proposed in the standard and save the cost by optimizing maintenance decisions, making the projects more cost-efficient and cost-effective. This article concludes by proposing a new diagnostic method based on a data-driven CM system to efficiently monitor the health and detect damages in the WT by means of measurements of critical parameters of the tested system. This article highlights how a reliability analysis, during the early phase of the design, is a very helpful and powerful means to guide the maintenance decision and the data-driven CM.