• Energy Research
• other engineering and technologies close
• 11. Sustainability close
• 12. Responsible consumption close
• SA close
• BE close

Alkali activated concretes have emerged as a prospective alternative to conventional concrete wherein diverse waste materials have been converted as valuable spin-offs. This paper presents a wide experimental study on the sustainability of employing waste sawdust as a fine/coarse aggregate replacement incorporating fly ash (FA) and granulated blast furnace slag (GBFS) to make high-performance cement-free lightweight concretes. Waste sawdust was replaced with aggregate at 0, 25, 50, 75, and 100 vol% incorporating alkali binder, including 70% FA and 30% GBFS. The blend was activated using a low sodium hydroxide concentration (2 M). The acoustic, thermal, and predicted engineering properties of concretes were evaluated, and the life cycle of various mixtures were calculated to investigate the sustainability of concrete. Besides this, by using the available experimental test database, an optimized Artificial Neural Network (ANN) was developed to estimate the mechanical properties of the designed alkali-activated mortar mixes depending on each sawdust volume percentage. Based on the findings, it was found that the sound absorption and reduction in thermal conductivity were enhanced with increasing sawdust contents. The compressive strengths of the specimens were found to be influenced by the sawdust content and the strength dropped from 65 to 48 MPa with the corresponding increase in the sawdust levels from 0% up to 100%. The results also showed that the emissions of carbon dioxide, energy utilization, and outlay tended to drop with an increase in the amount of sawdust and show more the lightweight concrete to be more sustainable for construction applications.

The growing population and increasing urbanization have led to a surge in domestic wastewater generation, posing significant challenges for effective and sustainable treatment. The present study demonstrates a novel and sustainable approach for the onsite treatment of domestic wastewater using an integrated settler-based biofilm reactor (ISBR) with efficient biogas generation. The ISBR provides an optimized environment for the growth of biofilm, facilitating the removal of organic pollutants and pathogens. Moreover, the ISBR enables the recovery of a valuable resource in the form of biogas, thus enhancing the overall utility of the treatment process. The performance of the ISBR was comprehensively evaluated at laboratory scale through treating the actual domestic wastewater generated from the hostel of Manipal University Jaipur. The ISBR system was operated under an ambient environment at a hydraulic retention time (HRT) of 24 h. The results demonstrated remarkable efficiency in terms of chemical oxygen demand (COD), total suspended solids (TSS), and coliforms removal, with average removal efficiency being more than 90%. According to the COD mass balance analysis, 48.2% of the influent COD was recovered as bioenergy. The chromatogram revealed a high percentage of methane gas in the collected biogas sample. The field emission scanning electron microscope (FESEM) analysis of the accumulated sludge in the ISBR system depicted the morphology of methanogenic bacteria. Both the experimental and theoretical results confirmed the feasibility and sustainability of the ISBR system at the onsite level.

Nature-based solutions may actively reduce hydro-meteorological risks in urban areas as a part of climate change adaptation. However, the main reason for the increasing uptake of this type of solution is their many benefits for the local inhabitants, including recreational value. Previous studies on recreational value focus on studies of existing nature sites that are often much larger than what is considered as new NBS for flood adaptation studies in urban areas. We thus prioritized studies with smaller areas and nature types suitable for urban flood adaptation and divided them into four common nature types for urban flood adaptation: sustainable urban drainage systems, city parks, nature areas and rivers. We identified 23 primary valuation studies, including both stated and revealed preference studies, and derived two value transfer functions based on meta-regression analysis on existing areas. We investigated trends between values and variables and found that for the purpose of planning of new NBS the size of NBS and population density were determining factors of recreational value. For existing NBS the maximum travelling distance may be included as well. We find that existing state-of-the-art studies overestimate the recreational with more than a factor of 4 for NBS sizes below 5 ha. Our results are valid in a European context for nature-based solutions below 250 ha and can be applied across different NBS types and sizes.

This article demonstrates how a cultural reading of consumption that focuses on the meaning and materiality of domestic indoor microclimates can contribute to conceptual developments in the field of practice theory that refocus attention on cultural patterns, including prevailing norms and prescriptions regarding indoor temperature and thermal comfort. Drawing on evidence collected during a research-led change initiative that encouraged people to reduce energy use in the home by lowering indoor temperature to 18°C, we deploy the heuristic device of “indoor microclimate as artifact” to show how the manifestation of this new artifact initiated significant changes in everyday practices that revolve around heating. We observe that these changes may also spill over into the public sphere – from home to workplace. By making the microclimate a tangible and visible thing, we describe how people appropriate and appreciate this new object of consumption, what it says about different bodies in diverse and bounded spaces, and what the artifact as a commodity reveals about broader systems of heating and energy provision, and associated actors. Due to the increasing spread of central heating and the growing importance of complex technological devices to monitor and control indoor temperature, heating is no longer a practice in and of itself for many urban dwellers in Europe. However, when people appropriate the indoor microclimate, new heating-related practices emerge that can lead to energy sufficiency. We thus argue that by deliberately “materializing” domestic indoor microclimate as part of a change initiative, more sustainable forms of energy use can be made to matter.

Abstract Many countries committed themselves in the Kyoto protocol to reduce greenhouse gas (GHG) emissions. Some of these targeted emission reductions could result from a switch from coal-fired to gas-fired electricity generation. The focus in this work lies on Western Europe, with the presence of the European Union Emission Trading Scheme (EU ETS). For the switching to occur, several conditions have to be fulfilled. First, an economical incentive must be present, i.e. a sufficiently high European Union Allowance (EUA) price together with a sufficiently low natural gas price. Second, the physical potential for switching must exist, i.e. at a given load, there must remain enough power plants not running to make switching possible. This paper investigates what possibilities exist for switching coal-fired plants for gas-fired plants, dependent on the load level (the latter condition above). A fixed allowance cost and a variable natural gas price are assumed. The method to address GHG emission reduction potentials is first illustrated in a methodological case. Next, the GHG emission reduction potentials are addressed for several Western European countries together with a relative positioning of their electricity generation. GHG emission reduction potentials are also compared with simulation results. GHG emission reduction potentials tend to be significant. The Netherlands have a very widespread switching zone, so GHG emission reduction is practically independent of electricity generation. Other counties, like Germany, Spain and Italy could reduce GHG emissions significantly by switching. With an allowance cost following the switch level of a 50% efficient gas-fired plant and a 40% efficient coal-fired plant in the summer season (like in 2005), the global GHG emission reduction (in the electricity generating sector) for the eight modeled zones could amount to 19%.

Abstract Recently, biodiesel has been gaining market share against fossil-origin diesel due to its ecological benefits and because it can be directly substituted for traditional diesel oils. However, the high cost of the raw materials required to produce biodiesel make it more expensive than fossil diesel. Therefore, low-priced raw materials, such as waste cooking oil and animal fats, are of interest because they can be used to drive down the cost of biodiesel. We have produced biodiesel from camel fat using a transesterification reaction with methanol in the presence of NaOH. The experimental variables investigated in this study were the temperature (30–75 °C), reaction time (20–160 min), catalyst concentration (0.25–1.5%), and methanol/fat molar ratio (4:1–9:1). A maximum biodiesel yield of 98.6% was obtained. The fuel properties of biodiesel, such as iodine value, saponification value, density, kinematic viscosity, cetane number, flash point, sulfur content, carbon residue, water and sediment, high heating value, refractive index, cloud point, pour point, and distillation characteristics, were measured. The properties were compared with EN 14214 and ASTM 6751 biodiesel standards, and an acceptable level of agreement was obtained.

Abstract The growing concerns of global warming and depleting oil/gas reserves have made it inevitable to seek energy from renewable energy resources. Many nations are embarking on introduction of clean/renewable solar energy for displacement of oil-produced energy. Moreover, solar photovoltaic (PV)–diesel hybrid power generation system technology is an emerging energy option since it promises great deal of challenges and opportunities for developed and developing countries. The Kingdom of Saudi Arabia (K.S.A) being enriched with higher level of solar radiation, is a prospective candidate for deployment of solar PV systems. Literature indicates that commercial/residential buildings in K.S.A. consume about 10–45% of the total electric energy generated. The aim of this study is to analyze long-term solar radiation data of Dhahran (East-Coast, K.S.A.) to assess the techno-economic feasibility of utilizing hybrid PV–diesel–battery power systems to meet the load of a typical residential building (with annual electrical energy demand of 35,120 kWh). The monthly average daily solar global radiation ranges from 3.61 to 7.96 kwh/m 2 . National Renewable Energy Laboratory's (NREL) Hybrid Optimization Model for Electric Renewable (HOMER) software has been employed to carry out the present study. The simulation results indicate that for a hybrid system composed of 4 kWp PV system together with 10 kW diesel system and a battery storage of 3 h of autonomy (equivalent to 3 h of average load), the PV penetration is 22%. The cost of generating energy (COE, US$/kWh) from the above hybrid system has been found to be 0.179 $/kWh (assuming diesel fuel price of 0.1$/l). The study exhibits that for a given hybrid configuration, the operational hours of diesel generators decrease with increase in PV capacity. The investigation also examines the effect of PV/battery penetration on COE, operational hours of diesel gensets for a given hybrid system. Concurrently, attention is focussed on un-met load, excess electricity generation, fuel savings and reduction in carbon emissions (for different scenarios such as PV–diesel without storage, PV–diesel with storage, as compared to diesel-only situation), COE of different hybrid systems, cost of PV–diesel–battery systems, etc.

Agricultural waste-based heterogeneous catalysts are emerging as efficient and green catalysts. The present study explored the agricultural waste-based heterogeneous catalyst utilized in the production of biodiesel. The plant waste is composed of organic compounds and various metals which, on combustion, produces ashes that mainly consist of various metal carbonates and oxides. The most commonly employed approach for the solid catalyst preparation from plant materials is the calcination process, and it is performed at temperatures ranging from 300 to 1200°C. It is known that the temperature employed for calcination plays a vital role in the composition and development of the morphology of the catalyst. The variation in alkalinity, porosity, and, accordingly, the catalytic activity of the catalyst is significantly influenced by the calcination temperature. It was found that the potassium present in the form of oxide and carbonate as the main constituent in such catalysts played a significant role in delivering catalytic efficacy. Therefore, a number of agricultural waste-based catalysts were reported as efficient catalysts. The selection of the catalyst may be one of the important issues for application in large-scale biodiesel production. Thus, the present study was undertaken for the preparation of a rank list among the reported catalysts by following the VIKOR (Višekriterijumsko Kompromisno Rangiranje) multicriterion decision-making approach. In this work, the ranking study was performed considering the reported optimum reaction conditions (ORCs) of biodiesel synthesis reactions. The study was conducted strictly on the basis of the parameters, viz., catalyst concentration ( C 1 ), MTOR ( C 2 ), reaction temperature ( C 3 ), reaction time ( C 4 ), and biodiesel yield ( C 5 ). The parameters are considered good if C 1 , C 2 , C 3 , and C 4 are low or minimum and if C 5 is high or maximum. The catalyst prepared from plantain peel showed the best performance and ranked as the first one followed by Musa paradisiaca peel and cocoa pod husk catalysts which are ranked second. Thus, the VIKOR method can be useful for comparison and ranking purposes if there are a large number of data, and this may be expanded for thorough study by considering more criteria which may give more fruitful results.