• Energy Research
• DE close
• AU close
• UA close
• Energies close

The application of residential rooftop PV systems increased significantly in the last 10 years in many countries and became a major source of clean energy in dwellings besides traditional solar hot water technology. To optimise the performance of these green energy systems, the incorporation of PV/thermal hybrid systems is a future option for sustainable residential building designs. In this work, a novel design of PV/Thermal (PVT) hybrid panels, using heat pipe technology, is proposed with the aim of fulfilling the hot water and electricity demand of a house in Sydney. The heat pipe system is integrated into a traditional PV panel to transfer the heat stored within the PV panel material to a header that is connected to the household hot water cycle. A preliminary analysis of the test results for the proposed PVT system design under different weather conditions in Sydney is conducted, where the transient variation of the output water temperature as well as power production is investigated. The results show that the hot water temperature at the header outlet reaches around a maximum of 50 °C on a typical summer day and a minimum of 30 °C on a typical winter day. The daily heat delivered to the hot water tank is found to be in the range of 3.7–5.2 MJ per m2 of the PVT panel surface area. The results show that the energy efficiency of the adopted PVT panel design could reach more than 4 times higher than the traditional PV panel.

Small modular nuclear reactors (SMRs) offer the promise of providing carbon-free electricity and heat to small islands or isolated electricity grids. However, the economic feasibility of SMRs is highly system-dependent and has not been studied in this context. We selected three case-study islands for such an evaluation: Jeju, Tasmania and Tenerife based on their system complexity. We generated 100,000 electricity-mix cases stochastically for each island and examined the system-level generation-cost changes by incrementing the average generation cost of SMRs from USD$60 to 200 MWh−1. SMRs were found to be economically viable when average generation cost was <$100 MWh−1 for Jeju and <$140 MWh−1 for Tenerife. For Tasmania the situation was complex; hydroelectric power is an established competitor, but SMRs might be complementary in a future “battery of the nation” scenario where most of the island’s hydro capacity was exported to meet peak power demand on the mainland grid. The higher average generation cost of SMRs makes it difficult for them to compete economically with a fossil fuel/renewable mix in many contexts. However, we have demonstrated that SMRs can be an economically viable carbon-free option for a small island with a limited land area and high energy demand.

The pressure on the energy sector to reduce greenhouse gas emissions is increasing. In the light of current greenhouse gas emissions in the energy sector, further expansion of renewable energy sources (RES) is inevitable to reduce emissions and reach the climate goals. This study aims at investigating structural characteristics of German counties regarding advantages for self-sufficient power systems based on RES. The modelling of the power sector based on RES is coupled with a cluster analysis in order to draw a large-scale conclusion on structural characteristics beneficial or obstructive for municipal energy systems. Ten clusters are identified with the Ward algorithm in a hierarchical-agglomerative method. The results underline a further need for RES expansion projects in order to close the gap between supply and demand. Only then, bioenergy can effectively balance the offset and support a truly self-sufficient local energy system. While the model results indicate that the majority of the counties are suitable for further expansion, this suitability is to be questioned in cluster 10. High population density is a critical characteristic, because with it come both a high demand and limited sites for further RES expansion projects.

Enhancing the heat transfer mechanism by increasing the heat exchanger surface area is a standard way to overcome low heat transfer on the gas side of heat exchangers. Different geometrical shapes, for example, plain, wavy, or interrupted fin geometries for plate-fin or tube-fin heat exchangers, are used for this task. Wire structures with dimensions in the submillimeter range are already used in regenerators for their heat capacity, but are rarely used in recuperators as heat transfer enhancers. New textile developments enable the fabrication of adapted structures with irregular grid sizes, and purpose-built for heat exchanger application. These wire structures allow for enlarging the heat transfer surface area, decreasing material utilization, and enabling flexibility of different geometrical dimensions. Possibilities for manufacturing and design selection are studied in the project, EffiMet, and thereafter at Fraunhofer ISE for the implementation of highly efficient heat exchanger geometries based on wire structures.

The present work applies a focal point of materials-related issues to review the major case studies of electron transport layers (ETLs) of metal halide perovskite solar cells (PSCs) that contain graphene-based materials (GBMs), including graphene (GR), graphene oxide (GO), reduced graphene oxide (RGO), and graphene quantum dots (GQDs). The coverage includes the principal components of ETLs, which are compact and mesoporous TiO2, SnO2, ZnO and the fullerene derivative PCBM. Basic considerations of solar cell design are provided and the effects of the different ETL materials on the power conversion efficiency (PCE) have been surveyed. The strategy of adding GBMs is based on a range of phenomenological outcomes, including enhanced electron transport, enhanced current density-voltage (J-V) characteristics and parameters, potential for band gap (Eg) tuning, and enhanced device stability (chemical and environmental). These characteristics are made complicated by the variable effects of GBM size, amount, morphology, and distribution on the nanostructure, the resultant performance, and the associated effects on the potential for charge recombination. A further complication is the uncertain nature of the interfaces between the ETL and perovskite as well as between phases within the ETL.

Industrial hydrogen production via alkaline water electrolysis (AEL) is a mature hydrogen production method. One argument in favor of AEL when supplied with renewable energy is its environmental superiority against conventional fossil-based hydrogen production. However, today electricity from the national grid is widely utilized for industrial applications of AEL. Also, the ban on asbestos membranes led to a change in performance patterns, making a detailed assessment necessary. This study presents a comparative Life Cycle Assessment (LCA) using the GaBi software (version 6.115, thinkstep, Leinfelden-Echterdingen, Germany), revealing inventory data and environmental impacts for industrial hydrogen production by latest AELs (6 MW, Zirfon membranes) in three different countries (Austria, Germany and Spain) with corresponding grid mixes. The results confirm the dependence of most environmental effects from the operation phase and specifically the site-dependent electricity mix. Construction of system components and the replacement of cell stacks make a minor contribution. At present, considering the three countries, AEL can be operated in the most environmentally friendly fashion in Austria. Concerning the construction of AEL plants the materials nickel and polytetrafluoroethylene in particular, used for cell manufacturing, revealed significant contributions to the environmental burden.

The change from a centralized to a decentralized energy supply creates new challenges in the planning of such energy supply concepts. Specialized planning tools that can cope with the complex requirements and multi-layered boundary conditions of local energy use are therefore needed. Existing methods need to be further developed and optimized to suit the complex stakeholder structures encountered in innovative district projects, as well as for research purposes. This paper presents selected aspects and challenges in the development of an application-oriented planning tool. Using a North German district as a case study, the usability of a Building Information Model as an aggregated data platform is tested in the context of a residential energy district planning process. In addition, the modeling of heating grids using a combination of Geographic Information System and open source thermodynamic tools is presented. Economic valuation methods are examined to determine the extent to which the value of flexibility and access to local flexibility markets can be taken into account. Finally, an approach for evaluating the ecological aspects of the district energy supply is presented, based on the dynamic assessment of imported and exported energy quantities.