• Energy Research
• Closed Access close
• Restricted close
• 13. Climate action close
• 11. Sustainability close
• ES close
• BE close
• UA close

Successive international commitments relating to energy and climatic change (embodied in the Kyoto Protocol) and the need to rationalise the sources of generated energy, have meant that renewable energies have started to gain a great deal of importance within the worldwide energy network. In the case of Wind Energy, and in terms of production, Spain is the second most important country at European level and the third most important country at global level. Spain holds these positions as a result of the establishment of a stable regulatory framework, better understanding of the resource and improved technology that have afforded considerable cost reduction in terms of initial investment, maintenance and exploitation. This article focuses on these circumstances in view of their relevance at international level, which is due to the highly feasible possibility of exporting Spain's experiences to other countries with guarantees of success.

Abstract Like cities, many large national parks in the United States often include “urban” visitor and residential areas that mostly demand (rather than produce) energy and key urban materials. The U.S. National Park Service has committed to quantifying and reducing scopes 1 and 2 emissions by 35% and scope 3 emissions by 10% by 2020 for all parks. Current inventories however do not provide the specificity or granularity to evaluate solutions that address fundamental inefficiencies in these inventories. By quantifying and comparing the importance of different inventory sectors as well as upstream and downstream emissions in Yosemite National Park (YNP), this carbon footprint provides a case study and potential template for quantifying future emissions reductions, and for evaluating tradeoffs between them. Results indicate that visitor-related emissions comprise the largest fraction of the Yosemite carbon footprint, and that increases in annual visitation (3.43–3.90 million) coincide with and likely drive interannual increases in the magnitude of Yosemite′s extended inventory (126,000–130,000 t CO2e). Given this, it is recommended that “per visitor” efficiency be used as a metric to track progress. In this respect, YNP has annually decreased kilograms of GHG emissions per visitor from 36.58 (2008) to 32.90 (2011). We discuss opportunities for reducing this measure further.

This study is to our knowledge the first to describe the effect of a Gas-Gas Heater (GGH) of a coal fired power plant's has on (i) the H2SO4 concentration and (ii) the particle/aerosol number concentration and particle size distribution present in the flue gas. In the absence of a GGH, homogenous nucleation takes places inside the Wet Flue Gas Desulphurisation (WFGD) converting the gaseous H2SO4 into aerosol H2SO4. This leads to a high aerosol number concentration behind the WFGD with 80% of the aerosols being smaller than 0.02 μm. This implies that an amine based carbon capture (CC) installation treating this flue gas can suffer from amine mist formation due to the high amount of available nuclei (i.e., H2SO4 aerosols) resulting in high amine emissions. In contrast, in the presence of a GGH not only 70% of the H2SO4 is removed from the flue gas (measured at the Nijmegen powerplant), but also homogenous nucleation in the WFGD is prevented resulting in low particle number concentrations. The flue gas leaving the GGH will not create any mist formation issues in an amine based CC installation due to the low amount of nuclei present in the flue gas. It is not the reduction in H2SO4 concentration by 70% inside the GGH as such that prevents mist formation but absence of H2SO4 in its aerosol form. These results are most likely quite widely transformable to other power plants that burn low sulfur coal i.e., around 0.7 weight%. This information will serve future pilot and demo CC installation around the world; in particular when retrofitted on power plants that have a GGH.

Abstract Building-integrated photovoltaics (BIPV) is a growing reality worldwide and its development involves implementing techniques to log and estimate the solar resources available. In this paper an easy methodology for the pre-classification of facades in BIPV projects has been described. This step is previous to the calculation of the complete solar potential in a building, and don't include the shape and shading factors. The proposed methodology covers the development of a new model that allows the irradiation factor (IF) to be estimated on facades with only 2 input parameters: the latitude of the place and the azimuth angle of the photovoltaic generator. The necessary tools to assess the “Energetic Efficiency Rating” for BIPV facades are provided, as an initial stage to be applied by architects and engineers.

Abstract A series of Ultraviolet-B broadband solar irradiance, 280–315 nm, measured during the period 2002–2011 in Valladolid (Spain) is analysed. UV-B daily values follow the pattern of the solar elevation angle. Daily maximum value occurred in June, 50.29 kJ m −2 , and minimum, 0.88 kJ m −2 , in December. The total accumulated UV-B irradiation along a mean year reached 7.1 MJ m −2 . The elemental statistical characteristics of hourly and daily irradiation show that the inter-quartile range is small in winter and increases in spring; maximum stability in UV-B takes place at solar noon and around summer; it can be concluded that this maximum may be considered representative of the UV-B irradiance values. The monthly-integrated UV-B irradiation values show a large annual cycle with a maximum in July, when the influence of the annual ozone column diminishes and summer solstice occurs. The results show that the harmonic analysis permits constructing long-term monthly UV-B values under clear and all sky conditions and from low number of parameters. The UV-B percentage attenuated by the atmosphere increases from winter to summer, a maximum value of 8% is obtained in summer and a minimum of 2% in winter. The cloudiness effects on the surface solar UV-B radiation are strong during the winter months, being the cloud transmittance 0.7 in December and 0.94 in July.

Vegetated coastal ecosystems, in particular mangroves, tidal marshes and seagrasses are highly efficient at sequestering and storing carbon, making them valuable assets for climate change mitigation and adaptation. The state of Queensland, in northeastern Australia, contains almost half of the total area of these blue carbon ecosystems in the country, yet there are few detailed regional or state-wide assessments of their total sedimentary organic carbon (SOC) stocks. We compiled existing SOC data and used boosted regression tree models to evaluate the influence of environmental variables in explaining the variability in SOC stocks, and to produce spatially explicit blue carbon estimates. The final models explained 75 % (for mangroves and tidal marshes) and 65 % (for seagrasses) of the variability in SOC stocks. Total SOC stocks in the state of Queensland were estimated at 569 ± 98 Tg C (173 ± 32 Tg C, 232 ± 50 Tg C, and 164 ± 16 Tg C from mangroves, tidal marshes and seagrasses, respectively). Regional predictions for each of Queensland's eleven Natural Resource Management regions revealed that 60 % of the state's SOC stocks occurred within three regions (Cape York, Torres Strait and Southern Gulf Natural Resource Management regions) due to a combination of high values of SOC stocks and large areas of coastal wetlands. Protected areas in Queensland play an important role in conserving SOC assets in Queensland's coastal wetlands. For example, ~19 Tg C within terrestrial protected areas, ~27 Tg C within marine protected areas and ~ 40 Tg C within areas of matters of State Environmental Significance. Using multi-decadal (1987-2020) mapped distributions of mangroves in Queensland; we found that mangrove area increased by approximately 30,000 ha from 1987 to 2020, which led to temporal fluctuations in mangrove plant and SOC stocks. We estimated that plant stocks decreased from ~45 Tg C in 1987 to ~34.2 Tg C in 2020, while SOC stocks remained relatively constant from ~107.9 Tg C in 1987 to 108.0 Tg C in 2020. Considering the level of current protection, emissions from mangrove deforestation are potentially very low; therefore, representing minor opportunities for mangrove blue carbon projects in the region. Our study provides much needed information on current trends in carbon stocks and their conservation in Queensland's coastal wetlands, while also contributing to guide future management actions, including blue carbon restoration projects.

Although recent research has demonstrated that waste orange peel (WOP) is a potentially valuable resource that can be transformed into high value products, heat generation, biomethanisation and composting might be considered the most feasible alternatives in terms of yield. This study revealed that WOP can be successfully valorised through combustion. However, a previous drying step, which generates hazardous wastewater, is required and harmful NOx are emitted with the flue gases. In contrast, a high yield of renewable methane (280LSTPCH4/kg added COD, chemical oxygen demand) and an organic amendment can be obtained through the thermophilic biomethanisation of WOP following the removal of valuable essential oils from the peel. Co-composting of WOP combined at different proportions (17-83%) with the organic fraction of municipal solid waste (OFMSW) was also demonstrated to be suitable. Moreover, a 37% reduction in odour generation was observed in co-composting of WOP compared to single composting of OFMSW.

With the spotlight on smart grid development around the world, it is critical to recognize the key factors contributing to changing power system characteristics. This is more apparent in distribution systems with the integration of renewable energy sources, energy storage, and microgrid development. Utilities are also focusing on the reliability and resiliency of the grid. These activities require distribution automation (DA) strategies that take advantage of available technologies while promoting newer solutions. It is necessary to create a roadmap for holistic DA strategies in a smarter grid. Sustainable and resilient grid development is a paradigm shift requiring a new line of thinking in the engineering, operation, and maintenance of the power system. International perspectives on DA are also addressed, with the understanding that one solution will not fit all. Integrating technical, business, and policy decisions into the challenges will generate the development of technologies, standards, and implementation of the overall solution. The challenges in the development of industry standards are also discussed. This paper explores the challenges and opportunities in the changing landscape of the distribution systems. Evolution of technologies and the business case for infrastructure investment in distribution systems are covered in another paper by the same authors.

In membrane bioreactors applied to wastewater treatment, fouling is typically a complex function of sludge characteristics. A pilot-scale tertiary submerged membrane bioreactor (tMBR) was continuously operated for over 200 days to assess the effect of biomass physiological state and environmental stress on process performance. Sludge characteristics were evaluated in terms of suspended solid concentration (MLSS and MLVSS), apparent viscosity, bioflocculation state, filterability, bioactivity, biopolymeric clusters (BPCs) and soluble microbial products. During the initial period of the tMBR start-up, when MLSS was below 3000 mg/L, the biomass was found to be very sensitive to environmental stress by sudden oxygen increase or organic shock loading, resulting in temporary biomass deflocculation and BPC release, and consequently, severe induced membrane fouling. However, at higher MLSS values, low stable biomass growth (0.04 ± 0.002 kg MLVSS/kg COD) was measured, regardless of organic overloading shocks or feeding failures. This period was also characterised by low bioactivity, BPC content and membrane fouling. Statistical analysis showed that BPCs have an important role when compared with other sludge properties as indicators of its fouling potential.