• Energy Research
• GB close
• AU close
• NL close
• BE close
• UA close
• Sustainability close

The Intergovernmental Panel on Climate Change (IPCC) report that to limit warming to 1.5 °C, Bioenergy with Carbon Capture and Storage (BECCS) is required. Integrated assessment models (IAMS) predict that a land area between the size of Argentina and Australia is required for bioenergy crops, a 3–7 time increase in the current bioenergy planting area globally. The authors pose the question of whether vertical farming (VF) technology can enable BECCS deployment, either via land sparing or supply. VF involves indoor controlled environment cultivation, and can increase productivity per unit land area by 5–10 times. VF is predominantly being used to grow small, high value leafy greens with rapid growth cycles. Capital expenditure, operational expenditure, and sustainability are challenges in current VF industries, and will affect the ability to utilise this technology for other crops. The authors argue that, whilst challenging, VF could help reach wider climate goals. Application of VF for bioenergy crops could be a game changer in delivering BECCS technologies and may reduce the land footprint required as well as the subsequent associated negative environmental impacts. VF bioenergy could allow us to cultivate the future demand for bioenergy for BECCS on the same, or less, land area than is currently used globally.

A new environmental ban has forced the restructure of open dumps in China since 1 July 2011. A technical process was established in this study that is feasible for the upgrade of open dumps through restructuring. The feasibility of restructuring and the benefit of greenhouse gas emission reductions were assessed according to field surveys of five landfills and four dumps in Nanjing. The results showed that the daily processing capacities of the existing landfills have been unable to meet the growth of municipal solid waste (MSW), making restructuring of the landfills imperative. According to an assessment of the technical process, only four sites in Nanjing were suitable for upgrading. Restructuring the Jiaozishan landfill effectively reduced the leachate generation rate by 5.84% under its scale when expanded by 60.7% in 2015. CO2 emissions were reduced by approximately 55,000–86,000 tons per year, in which biogas power generation replaced fossil fuels Fossil fuels accounted for the largest proportion, up to 45,000–60,000 tons. Photovoltaic power generation on the overlying land has not only reduced CO2 emissions to 26,000–30,000 tons per year but has also brought in continuing income from the sale of electricity. The funds are essential for developing countries such as China, which lack long-term financial support for landfill management after closure.

Climate change, environmental degradation, and limited resources are motivations for sustainable forest management. Forests, the most abundant renewable resource on earth, used to make a wide variety of forest-based products for human consumption. To provide a scientific measure of a product’s sustainability and environmental performance, the life cycle assessment (LCA) method is used. This article provides a comprehensive review of environmental performances of forest-based products including traditional building products, emerging (mass-timber) building products and nanomaterials using attributional LCA. Across the supply chain, the product manufacturing life-cycle stage tends to have the largest environmental impacts. However, forest management activities and logistics tend to have the greatest economic impact. In addition, environmental trade-offs exist when regulating emissions as indicated by the latest traditional wood building product LCAs. Interpretation of these LCA results can guide new product development using biomaterials, future (mass) building systems and policy-making on mitigating climate change. Key challenges include handling of uncertainties in the supply chain and complex interactions of environment, material conversion, resource use for product production and quantifying the emissions released.

Lower Mekong Basin (LMB) experiences a recurrent drought phenomenon. However, few studies have focused on drought monitoring in this region due to lack of ground observations. The newly released Climate Hazards Group Infrared Precipitation with Station data (CHIRPS) with a long-term record and high resolution has a great potential for drought monitoring. Based on the assessment of CHIRPS for capturing precipitation and monitoring drought, this study aims to evaluate the drought condition in LMB by using satellite-based CHIRPS from January 1981 to July 2016. The Standardized Precipitation Index (SPI) at various time scales (1–12-month) is computed to identify and describe drought events. Results suggest that CHIRPS can properly capture the drought characteristics at various time scales with the best performance at three-month time scale. Based on high-resolution long-term CHIRPS, it is found that LMB experienced four severe droughts during the last three decades with the longest one in 1991–1994 for 38 months and the driest one in 2015–2016 with drought affected area up to 75.6%. Droughts tend to occur over the north and south part of LMB with higher frequency, and Mekong Delta seems to experience more long-term and extreme drought events. Severe droughts have significant impacts on vegetation condition.

Bridges in Ukraine are one of the most important components of the infrastructure, requiring attention from government agencies and constant funding. The object of the study was the methodology for quantifying the condition of bridge components. The Artificial Neural Network-based (ANN) tool was developed to quantify the technical condition of bridge components. The literature analysis showed that in most cases the datasets were obtained during the inspection of bridges to solve the problems of assessing the current technical condition. The lack of such a database prompted the creation of a dataset on the basis of the Classification Tables of the Operating Conditions of the Bridge Components (CT). Based on CTs, five datasets were formed to assess the condition of the bridge components: bridge span, bridge deck, pier caps beam, piers and abutments, approaches. The next step of this study was creating, training, validating and testing ANN models. The network with ADAM loss function and softmax activation showed the best results. The optimal values of MAPE and R2 were achieved at the 100th epoch with 64 neurons in the hidden layer and were equal to 0.1% and 0.99998, respectively. The practical application of the ANN models was carried out on the most common type of bridge in Ukraine, namely, a road beam bridge of small length, made of precast concrete. The novelty of this study consists of the development of a tool based on the use of ANN model, and the proposal to modify the methodology for quantifying the condition of bridge components. This will allow minimizing the uncertainties associated with the subjective judgments of experts, as well as increasing the accuracy of the assessment.

Sustainability has emerged, arguably, as the premiere mission of contemporary architecture. Green assessment tools abound, consultancy services flourish, buildings are marketed on the basis of sustainability performance, and government, media, and corporations seem preoccupied with assessing the quality of the built environment through a green lens. Yet for all the effort, and indeed for all the progress made, fundamental issues resistant to the structural change that is essential for genuine sustainability remain. This paper reviews the state of play of sustainability across the urban landscape. It considers the road travelled so far, and points out some of the major challenges that lie ahead.

To reduce plastic waste generation from failed product batches during industrial injection molding, the sustainable production of representative prototypes is essential. Interesting is the more recent hybrid injection molding (HM) technique, in which a polymeric mold core and cavity are produced via additive manufacturing (AM) and are both placed in an overall metal housing for the final polymeric part production. HM requires less material waste and energy compared to conventional subtractive injection molding, at least if its process parameters are properly tuned. In the present work, several options of AM insert production are compared with full metal/steel mold inserts, selecting isotactic polypropylene as the injected polymer. These options are defined by both the AM method and the material considered and are evaluated with respect to the insert mechanical and conductive properties, also considering Moldex3D simulations. These simulations are conducted with inputted measured temperature-dependent AM material properties to identify in silico indicators for wear and to perform cooling cycle time minimization. It is shown that PolyJetted Digital acrylonitrile-butadiene-styrene (ABS) polymer and Multi jet fusioned (MJF) polyamide 11 (PA11) are the most promising. The former option has the best durability for thinner injection molded parts, and the latter option the best cooling cycle times at any thickness, highlighting the need to further develop AM options.

Digital Transformations (DT) play an increasingly important role in academia and business, yet their significant Environmental Footprint (EF) is often overlooked, sidelining their potential for Environmental Sustainability (ES). This paper bridges this gap by integrating ES into the discourse of DT, proposing Green Enterprise Architecture (GREAN) as a method for sustainable transformation. Utilizing a Design Science Research approach, we developed an artefact outlining a comprehensive strategy for embedding ES in DT across various layers of an organization. The tool’s need was validated via a systematic literature review (SLR), highlighting the significant research gap in Green Enterprise Architecture. The artefact provides concrete Courses of Action (CoAs) for incorporating ES into the organizational strategy, business, data, application, and technology layers and proposes relevant capabilities to address this. The paper further presents an ES-aware business capability modelling, an innovative business modelling approach that integrates environmental sustainability principles by using (in a novel way) the presentation and analysis methods that capability mapping offers. The proposed artefact serves as a starting point for environmentally sustainable DTs. Future research directions include in-depth exploration of each enterprise layer for ES, real-world validation of our proposed tools and concepts, and the expansion of these into a full framework.