• Energy Research
• 12. Responsible consumption close
• 15. Life on land close
• US close
• CN close
• GB close
• DE close

The growing population and increasing urbanization have led to a surge in domestic wastewater generation, posing significant challenges for effective and sustainable treatment. The present study demonstrates a novel and sustainable approach for the onsite treatment of domestic wastewater using an integrated settler-based biofilm reactor (ISBR) with efficient biogas generation. The ISBR provides an optimized environment for the growth of biofilm, facilitating the removal of organic pollutants and pathogens. Moreover, the ISBR enables the recovery of a valuable resource in the form of biogas, thus enhancing the overall utility of the treatment process. The performance of the ISBR was comprehensively evaluated at laboratory scale through treating the actual domestic wastewater generated from the hostel of Manipal University Jaipur. The ISBR system was operated under an ambient environment at a hydraulic retention time (HRT) of 24 h. The results demonstrated remarkable efficiency in terms of chemical oxygen demand (COD), total suspended solids (TSS), and coliforms removal, with average removal efficiency being more than 90%. According to the COD mass balance analysis, 48.2% of the influent COD was recovered as bioenergy. The chromatogram revealed a high percentage of methane gas in the collected biogas sample. The field emission scanning electron microscope (FESEM) analysis of the accumulated sludge in the ISBR system depicted the morphology of methanogenic bacteria. Both the experimental and theoretical results confirmed the feasibility and sustainability of the ISBR system at the onsite level.

Root–soil mechanical interactions are of vital importance in soil reinforcement by plant roots. However, it is unclear how the angles of the roots in the soil affect the root–soil mechanical interactions. To better understand the effect of this factor on root–soil mechanical interactions, pullout tests were conducted on alfalfa (Medicago sativa L.) roots with five root diameter groups (0.10–0.30 mm, 0.31–0.50 mm, 0.51–0.70 mm, 0.71–0.90 mm and 0.91–1.10 mm) and four embedding angles (30°, 45°, 60° and 90°) in sandy loam soil. Root tensile tests were also carried out to understand the process of root failure in the pullout tests. The results showed that the roots had two failure modes, slippage failure and breakage failure. The critical diameter of the two failure modes was 0.35 mm. Peak pullout force and pullout energy were positively related to the root diameter in power functions. Displacement was negatively related to the root diameter and embedding angle in exponential functions. Peak pullout force, root–soil friction coefficient and pullout energy all increased and then decreased with increasing embedding angles. The peak pullout force and root–soil friction coefficient reached their maximum values under an embedding angle of 60°, and pullout energy reached the maximum value under an embedding angle of 45°. Pullout energy was suggested as a preferred index of root–soil mechanical interactions for both thick/fine roots and inclined/upright roots.

Abstract Industrial hemp, (Cannabis sativa L.), one of the earliest crops spun for fiber, is now used for a variety of commercial products including paper, textiles, clothing, biodegradable plastics, biofuel, food, animal feed etc., all of which are derived from hemp fiber or seeds. Being wind pollinated, dioecious and staminate hemp plants produce large amounts of pollen that are attractive to bees. Hemp flowering in northern Colorado, where this study was conducted, occurs between the end of July and the end of September. This time period coincides with a dearth of pollinator-friendly crop plants in the region, making hemp flowers a potentially valuable source of pollen for foraging bees. Here we present the diversity and abundance of bees collected in the fields of flowering hemp. A total of 23 different genera of bees were collected of which the European honeybee, Apis mellifera at 38% of the total abundance was the most dominant followed by Melissodes bimaculata at 25% and Peponapis pruinosa at 16%. These three genera made up nearly 80% of the total abundance. While hemp does not produce any nectar, the pollen rich nature of the flowers can make hemp an ecologically valuable crop. As cultivation of hemp continues to expand, we expect insect pests on hemp to also become prevalent. Our results documenting bee diversity in flowering hemp provides the impetus for the development of integrated pest management plans that protect pollinators while controlling pests.

Abstract Liquid fuels are likely to remain the main energy source in long-range transportation and aviation for several decades. To reduce our dependence on fossil fuels, liquid biofuels can be blended to fossil fuels – or used purely. In this paper, coconut methyl ester, standard diesel fuel (EN590:2017), and their blends were investigated in 25 V/V% steps. A novel turbulent combustion chamber was developed to facilitate combustion in a large volume that leads to ultra-low emissions. The combustion power of the swirl burner was 13.3 kW, and the air-to-fuel equivalence ratio was 1.25. Two parameters, combustion air preheating temperature and atomizing air pressure were adjusted in the range of 150–350 °C and 0.3–0.9 bar, respectively. Both straight and lifted flames were observed. The closed, atmospheric combustion chamber resulted in CO emission below 10 ppm in the majority of the cases. NO emission varied between 60 and 183 ppm at straight flame cases and decreased below 20 ppm when the flame was lifted since the combustion occurred in a large volume. This operation mode fulfills the 2015/2193/EU directive for gas combustion by 25%, which is twice as strict as liquid fuel combustion regulations. The 90% NO emission reduction was also concluded when compared to a lean premixed prevaporized burner under similar conditions. This favorable operation mode was named as Mixture Temperature-Controlled (MTC) Combustion. The chemiluminescent emission of lifted flames was also low, however, the OH* emission of straight flames was clearly observable and followed the trends of NO emission. The MTC mode may lead to significantly decreased pollutant emission of steady-operating devices like boilers, furnaces, and both aviation and industrial gas turbines, meaning an outstanding contribution to more environmentally friendly technologies.

Salt marsh vegetation density varies considerably on short spatial scales, complicating attempts to evaluate plant characteristics using airborne remote sensing approaches. In this study, we used a mast-mounted hyperspectral imaging system to obtain cm-scale imagery of a salt marsh chronosequence on Hog Island, VA, where the morphology and biomass of the dominant plant species, Spartina alterniflora, varies widely. The high-resolution hyperspectral imagery allowed the detailed delineation of variations in above-ground biomass, which we retrieved from the imagery using the PROSAIL radiative transfer model. The retrieved biomass estimates correlated well with contemporaneously collected in situ biomass ground truth data ( R 2 = 0.73 ). In this study, we also rescaled our hyperspectral imagery and retrieved PROSAIL salt marsh biomass to determine the applicability of the method across spatial scales. Histograms of retrieved biomass changed considerably in characteristic marsh regions as the spatial scale of the imagery was progressively degraded. This rescaling revealed a loss of spatial detail and a shift in the mean retrieved biomass. This shift is indicative of the loss of accuracy that may occur when scaling up through a simple averaging approach that does not account for the detail found in the landscape at the natural scale of variation of the salt marsh system. This illustrated the importance of developing methodologies to appropriately scale results from very fine scale resolution up to the more coarse-scale resolutions commonly obtained in airborne and satellite remote sensing.

Activities involving land use, land-use change,forestry, and agriculture (LUCF) can help reducegreenhouse gas (GHG) concentrations in the atmosphereby increasing biotic carbon storage, by decreasing GHGemissions, and by producing biomass as a substitutefor fossil fuels. Potential activities includereducing rates of deforestation, increasing landdevoted to forest plantations, regenerating secondaryforest, agroforestry, improving the management offorests and agricultural areas; and producing energycrops.Policymakers debating the inclusion of a variety ofLUCF activities in the Clean Development Mechanism(CDM) of the Kyoto Protocol need to consider themagnitude of the carbon contribution these activitiescould make. Existing estimates of the cumulative GHGoffset potential of LUCF activities often take aglobal or regional approach. In contrast, land-usedecisions are usually made at the local level anddepend on many factors including productive capacityof the land, financial considerations of thelandowner, and environmental concerns. Estimates ofGHG offset potential made at a local, or at mostcountry, level that incorporate these factors may belower, as well as more useful for policy analyses,than global or large regional estimates. Whilecountry-level estimates exist for forestry activities,similar estimates utilizing local information need tobe generated for agricultural activities and biofuels,as well as for the cumulative potential of all LUCFactivities in a particular location.

Darfur farming and pastoralist livelihoods are both adaptations to the environmental variability that characterises the region. This article describes this adaptation and the longer‐term transformation of these specialised livelihoods from the perspective of local communities. Over several decades farmers and herders have experienced a continuous stream of climate, conflict and other shocks, which, combined with wider processes of change, have transformed livelihoods and undermined livelihood institutions. Their well‐rehearsed specialist strategies are now combined with new strategies to cope. These responses help people get by in the short term but risk antagonising not only their specialist strategies but also those of others. A combination of factors has undermined the former integration between farming and pastoralism and their livelihood institutions. Efforts to build resilience in similar contexts must take a long‐term view of livelihood adaptation as a specialisation, and consider the implications of new strategies for the continuity and integration of livelihood specialisations.

Cogeneration of heat and electricity is an important pillar of energy and climate policy. To plan the production and distribution system of combined heat and power (CHP) systems for residential heating, suitable methods for decision support are needed. For a comprehensive feasibility analysis, the integration of the location and capacity planning of the power plants, the choice of customers, and the network planning of the heating network into one optimization model are necessary. Thus, we develop an optimization model for electricity generation and heat supply. This mixed integer linear program (MILP) is based on graph theory for network flow problems. We apply the network location model for the optimization of district heating systems in the City of Osorno in Chile, which exhibits the “checkerboard layout” typically found in many South American cities. The network location model can support the strategic planning of investments in renewable energy projects because it permits the analysis of changing energy prices, calculation of break-even prices for heat and electricity, and estimation of greenhouse gas emission savings.