• Energy Research
• US close
• GB close
• FR close
• CA close

Currently active suspension system is more applicable than passive for improving the suspension performance, ensuring the stability and passenger safety in modern automotive suspension system. However, high energy consumption is one of the main disadvantages of implementing this system in real applications. In this paper, the energy consumption of electromagnetic actuators used for an active suspension system controlled by proportional-integral-derivative (PID), fuzzy adaptive PID, and neuron adaptive PID are investigated through simulation studies. Based on the energy consumption and the performance analysis, it has found that it is potential to develop a vibration energy recovery system to achieve the energy balance requirement in active suspension systems.

In an effort to define the desirable airfoil characteristics for large variable-speed wind turbines, a systematic study was performed using a series of airfoils designed to have similar aerodynamic properties, except for the amount of lift, which varied over a wide range. For several airfoil combinations, blade shapes were designed for a 750-kW wind turbine with a 48.8-m diameter rotor using the optimization code PROPGA together with PROPID, which is an inverse design method for horizontalaxis wind turbines. Roughness effects, including the consideration of dirty-blade performance in the blade-shape optimization process, were also considered and are discussed. The results and conclusions reveal practical design implications that should aid in the aerodynamic blade design of not only large but also other sizes of variable-speed wind turbines.

Energy flux streamlines yield certain advantages for the visualization of acoustical scattering processes. They give information about scattering angles, interaction with surfaces and scatterers, and can even show the relative intensity of the sound at a given location. However, the use of energy flux streamlines presents certain difficulties as well. Beyond the difficulty in calculating them, the use of the energy flux field presumes a complete solution of the sound scattering problem. Thus energy flux streamlines are usually descriptive rather than predictive. And while the set of streamlines can be chosen so as to show the relative intensities of the sound field, what works in one geometry will not necessarily work in another. Examples will be adduced illustrating these points and more.

• Key message Insurance might be an efficient tool to strengthen adaptation of forest management to climate change. A theoretical model under uncertainty is proposed to highlight the effect, on adaptation decisions, of considering adaptation efforts in forest insurance contracts. Results show that insurance is relevant to increase adaptation efforts under some realistic conditions on forest owner’s uncertainty and risk preferences, and on the observability or not of adaptation efforts. • Context One of the challenges of forest adaptation to climate change is to encourage private forest owners to implement adaptation strategies. • Aims We suggest the analysis of forest insurance contracts against natural hazards as a vector to promote the implementation of adaptation efforts by private forest owners. • Methods We propose a theoretical model of insurance economics under risk and under uncertainty. • Results Our results indicate that when climate change makes the probability of the occurrence of the natural event uncertain, then it may be relevant to include adaptation efforts in the insurance contract, leading to an increase in the adaptation efforts of risk-averse and uncertainty-averse forest owners. In addition, we show that the relevance of insurance as a vector to promote adaptation efforts is greater when the forest owner’s effort is unobservable by the insurer as compared to a situation of perfectly observable effort. • Conclusion Under some realistic assumptions, the forest insurance contract seems to be a relevant tool to encourage forest owners to adapt to climate change.

Ultrarich filtration combustion of ethane is studied in a porous medium composed of alumina spheres with the aim to achieve optimized conversion to hydrogen and syngas. Temperature, velocities, and...

Many aquatic species with stylar polymorphisms have the capacity for clonal and sexual reproduction and are sensitive to the balance of the two reproductive modes when there are a limited number of mating morphs within a population. This study asked how the clonal and sexual reproductive modes perform in populations that contain only a single morph and where fitness gain through sexual reproduction is rare. In clonal aquatic Nymphoides montana, polymorphic populations normally contain two mating morphs in equal frequencies. Populations are sexually fertile and appear to be maintained by pollen transfer between the two partners. However, in a monomorphic population of N. montana where mating opportunities are unavailable, female and male function is impaired and clonality maintains the population. Here, the consequences of intraspecific variation in sexuality were explored between monomorphic and polymorphic N. montana populations in eastern Australia.Comparative measurements of male and female fertility, total dry mass and genotypic diversity using ISSR markers were made between populations with variable sexuality.Very few seeds were produced in the monomorphic population under natural and glasshouse conditions due to dysfunctional pollen and ovules. Stigma-anther separation was minimal in the monomorphic population, which may be a consequence of the relaxed selective pressures that regulate the maintenance of sexual function. However, clonal reproduction was favoured at the expense of sexual reproduction in the monomorphic population; this may facilitate the establishment of sterility throughout the population via resource reallocation or pleiotropic effects. The ISSR results showed that the monomorphic population was one large, single genotype, unlike the multi-genotypic fertile polymorphic populations. Evolutionary loss of sex in a clonal population in which a mating morph is absent was evident; under these conditions clonal growth may assure reproduction and expand the population via spreading stolons.

To mitigate the temperature increase in urban environments and reduce its impact on energy consumption and the quality of the environment, urban retrofitting technologies have been developed and applied worldwide. High albedo in urban surfaces and additional vegetation are the most efficient strategies to accomplish these goals. The objective of this study is to estimate the weight of these strategies, both individually and integrated, on the cooling potential of two Latin American cities. To do this, 36 low and high urban density scenarios were simulated with the ENVI-Met software. The simulation models were calibrated using air temperature curves which were monitored during the summer periods from 2010 to 2013. A Principal Components Analysis was carried out to establish possible associations between the proposed mitigation strategies and then the weight of anthropogenic heat was evaluated according to the configuration. The results show that the integrated mitigation strategies in urban areas -i. e. increase vegetation and albedo on horizontal surfaces- has a great potential to mitigate urban warming, showing a more significant impact on low-density urban configuration. The contribution of anthropogenic heat mainly produced by motorized transport and air conditioning systems, is a crucial input data for the urban microclimate simulations. Its impact on the urban densification processes may cancel out the benefits derived by the application of the mitigation strategies considered.

AbstractThe ethylene glycol oxidation reaction on nickel and ruthenium modified palladium nanocatalysts was investigated with electrochemical, spectroelectrochemical, and chromatographic methods. These carbon‐supported materials, prepared by a revisited polyol approach, exhibited high activity towards the ethylene glycol electrooxidation in alkaline medium. Electrolysis coupled with high performance liquid chromatography/mass spectrometry (HPLC‐MS) and in situ Fourier transform infrared spectroscopy (FTIRS) measurements allowed us to determine the different compounds electrogenerated in the oxidative conversion of this two‐carbon molecule. High value‐added products such as oxalate, glyoxylate, and glycolate were identified in all electrolytic solutions, whereas glyoxylate was selectively formed at the Ru45@Pd55/C electrode surface. In situ FTIRS results also showed a decrease in the pH value in the thin layer near the electrode as a consequence of OH− consumption during the spectroelectrochemical experiments.