• Energy Research
• natural sciences close
• 3. Good health close
• US close

Trace elements can have profound adverse effects on the health of people burning coal in homes or living near coal deposits, coal mines, and coal-burning power plants. Trace elements such as arsenic emitted from coal-burning power plants in Europe and Asia have been shown to cause severe health problems. Perhaps the most widespread health problems are caused by domestic coal combustion in developing countries where millions of people suffer from fluorosis and thousands from arsenism. Better knowledge of coal quality characteristics may help to reduce some of these health problems. For example, information on concentrations and distributions of potentially toxic elements in coal may help delineate areas of a coal deposit to be avoided. Information on the modes of occurrence of these elements and the textural relations of the minerals in coal may help to predict the behavior of the potentially toxic trace metals during coal cleaning, combustion, weathering, and leaching.

Phytochemical investigation on the rhizomes of Homalomena occulta resulted in the isolation of five new sesquiterpenoids, namely cadinane-4β,5α,10α-triol (1), 5(11)-epoxycadinane-4β,5β,10β,11-tetraol (2), bullatantiol-1β-methyl malate (3), 1β,4β,7α-trihydroxyeudesmane-1β-methyl malate (6), and 1β,4α,7-trihydroxyeudes-mane (7), together with five known sesquiterpenoids, bullatantriol (4), acetylbullatantriol (5), 1β,4β,7α-trihydroxyeudesmane (8), 1β,4β,7β-trihydroxyeude-smane (9), and pterodontriol (10). Their structures were elucidated on the basis of spectroscopic evidences, including various 1D and 2D NMR and HR-ESI-MS. The structure of 1 was further confirmed by single-crystal X-ray diffraction analysis.

The United Nations’ Sustainable Development Goals (SDGs) rest on a set of broadly accepted values within a human rights framework. The SDGs seek to improve human lives, improve the planet, and foster prosperity. This paper examines the human rights framework and the principles of social justice and shows that, while the SDGs do not specifically state that there is human right to food, the SDGs do envision a better, more just, world which rests upon the sufficiency of the global food supply, on environmental sustainability, and on food security for all. Then the paper examines the interrelationships between the SDGs, food access and waste, and human rights within a framework of social justice. Finally, it looks at the potential pandemic of hunger wrought by COVID-19, showing that COVID-19 serves as an example of a crisis that has raised unprecedented challenges to food loss and waste in the global food supply system and tests our commitment to the principles espoused by the SDGs.

Pharmaceutical and personal care products (PPCPs) are discharged into receiving water bodies mainly from sewage treatment plants. Due to the inefficient removal in conventional wastewater treatment facilities, PPCPs have become a major concern to aquatic ecosystems, water quality, and public health worldwide since they cause harmful effects on aquatic life and human even at low doses. Among the PPCPs, carbamazepine (CBZ) is one of the most commonly prescribed anticonvulsant drugs and consumed more than 1,000 tons per year. Due to its structural complexity, CBZ is known as recalcitrant compound highly stable during wastewater treatment. Consequently, it has become one of the most frequently detected pharmaceuticals in waste water, surface water, and even drinking water. In this study, Korean indigenous microalgae strains were tested as eco-friendly and cost-effective solutions for CBZ removal. Based on the preliminary biological CBZ degradation tests, Tetradesmus obliquus KNUA061 demonstrating the best CBZ removal rate was selected for further experiments. In order to increase strain KNUA061's CBZ removal efficiency, NaOCl, which is widely accepted in the water purification process, was used as an additional stimulus to induce stress conditions. At around 20 μg L−1 CBZ, addition of 1.0 mg NaOCl resulted in approximately 20% of removal rate increase without suppressing cells growth. Roughly 90% of CBZ remained its original form and the composition of the transformed secondary metabolites was less than 10% during the biodegradation process by the microalga. Based on the results of the antioxidant enzyme activities, degree of lipid oxidation, and amino acid contents, it was concluded that the redox-defence system in microalgal cells may have been activated by the NaOCl treatment. Biomass analysis results showed that higher heating value (HHV) of strain KNUA061 biomass was higher than those of lignocellulosic energy crops suggesting that it could be utilized as a possible renewable energy source. Even though its biodiesel properties were slightly below the international standards due to the high PUFA contents, the biodiesel produced from T. obliquus KNUA061 could be used as a blending resource for transportation fuels. It was also determined that the microalgal biomass has acceptable feasibility as a sustainable dietary supplement feedstock due to its high essential amino acid contents.

Abstract Background Polylactic acid (PLA), a biodegradable polymer, has the potential to replace (at least partially) traditional petroleum-based plastics, minimizing “white pollution”. However, cost-effective production of optically pure L-lactic acid is needed to achieve the full potential of PLA. Currently, starch-based glucose is used for L-lactic acid fermentation by lactic acid bacteria. Due to its competition with food resources, an alternative non-food substrate such as cellulosic biomass is needed for L-lactic acid fermentation. Nevertheless, the substrate (sugar stream) derived from cellulosic biomass contains significant amounts of xylose, which is unfermentable by most lactic acid bacteria. However, the microorganisms that do ferment xylose usually carry out heterolactic acid fermentation. As a result, an alternative strain should be developed for homofermentative production of optically pure L-lactic acid using cellulosic biomass. Results In this study, an ethanologenic Escherichia coli strain, SZ470 (ΔfrdBC ΔldhA ΔackA ΔpflB ΔpdhR ::pflBp6-acEF-lpd ΔmgsA), was reengineered for homofermentative production of L-lactic acid from xylose (1.2 mole xylose = > 2 mole L-lactic acid), by deleting the alcohol dehydrogenase gene (adhE) and integrating the L-lactate dehydrogenase gene (ldhL) of Pediococcus acidilactici. The resulting strain, WL203, was metabolically evolved further through serial transfers in screw-cap tubes containing xylose, resulting in the strain WL204 with improved anaerobic cell growth. When tested in 70 g L-1 xylose fermentation (complex medium), WL204 produced 62 g L-1 L-lactic acid, with a maximum production rate of 1.631 g L-1 h-1 and a yield of 97% based on xylose metabolized. HPLC analysis using a chiral column showed that an L-lactic acid optical purity of 99.5% was achieved by WL204. Conclusions These results demonstrated that WL204 has the potential for homofermentative production of L-lactic acid using cellulosic biomass derived substrates, which contain a significant amount of xylose.

Aqueous energy storage devices attract increased attention due to their high safety, low cost, and easy maintenance. However, the low energy density caused by the narrow electrochemical stability window (ESW) of aqueous electrolytes severely restricts their widespread applications. Herein, a new type of “small‐molecule crowding” electrolyte of 95EG‐H2O (95 wt% ethylene glycol [EG]) is proposed for the first time. Significant enhancement of water molecular stability is accomplished through the engineering of a hydrogen bond network. The small‐molecular crowding agent (EG) not only expands the ESW to 3.2 V, but also endows the electrolyte with low viscosity. As a proof‐of‐concept device, the symmetry carbon‐based supercapacitor using the newly developed electrolyte exhibits a so far record‐high operating voltage of 2.8 V, a high energy density of 58.7 Wh kg−1 at a power density of 1.4 and 30.3 Wh kg−1 at a power density of 42 kW kg−1, and a durable lifespan exceeding 20 000 cycles at a current density of 5 A g−1.

AbstractFive reactor systems (free cell batch, free cell continuous, entrapped cell immobilized, adsorbed cell packed bed, and cell recycle membrane reactors) were compared for ethanol production from xylose using Escherichia coli FBR5. In the free cell batch and free cell continuous reactors (continuous stirred tank reactor‐CSTR) productivities of 0.84 gL−1 h−1 and 1.77 gL−1 h−1 were achieved, respectively. A cell recycle membrane reactor resulted in the highest productivity of 55.56 gL−1 h−1, which is an increase of 66‐fold (e.g., 6614%) over the batch reactor. Calcium alginate gel CSTR resulted in a productivity of 2.04 gL−1 h−1 whereas adsorbed cell packed bed reactor resulted in a productivity of 4.39 gL−1 h−1. In the five reactor systems, ethanol concentrations ranged from 18.9 to 40.30 gL−1 with metabolic yields from 0.44 to 0.51. Published 2012 American Institute of Chemical Engineers Biotechnol. Prog., 2012

KOH-based electrolytes with different salt additives were investigated to reduce their corrosive nature toward Mg/Ni metal hydride alloys used as negative electrodes in nickel metal hydride (Ni/MH) batteries. Alkaline metal halide salts and oxyacid salts were studied as additives to the traditional KOH electrolyte with concentrations varying from 0.005 M to 1.77 M. Effects of the cations and anions of the additives on charge/discharge performance are discussed. The reduction potential of alkaline cations and radii of halogen anions were correlated with initial capacity and degradation of the metal hydride alloy. A synergistic effect between KOH and some oxyacid salt additives was observed and greatly influenced by the nature of the salt additives. It was suggested that both the formation of a solid film over the metal hydride surface and the promotion of proton transfer in the additives containing electrolytes led to a decreased degradation of the electrodes and an increased discharge capacity. 12 salt additives, NaC2H3O2, KC2H3O2, K2CO3, Rb2CO3, Cs2CO3, K3PO4, Na2WO4, Rb2SO4, Cs2SO4, NaF, KF, and KBr, were found to increase the corrosion resistance of the MgNi-based metal hydride alloy.