• Energy Research
• engineering and technology close
• 12. Responsible consumption close
• 1. No poverty close
• Persian close

Background and Objective: In recent years, management and disposal of municipal solid waste has become a global problem and the most important environmental concern. Anaerobic digestion is a cost-effective solution for treatment of both solid waste and wastewater. The aim of this study was to investigate the positive or negative effects of calcium chloride content in anaerobic digestion process of municipal solid waste and leachate on biogas production. Materials and Methods: Experiments with 8 levels of calcium chloride on co-digestion of municipal solid waste and leachate were investigated in 500 ml digesters under mesophilic conditions in a completely randomized design with three replications. Reactors with a ratio of substrate to inoculum of 2 (on VS basis) were operated and the volume of the biogas was measured daily. Volatile and total solids, carbon/nitrogen of waste, COD, BOD and heavy metals were measured by following APHA. Results: The results of the experiment showed that the pH was decreased with increasing calcium chloride concentration. The highest amount of cumulative biogas production was obtained in CaCl2 of 2 g/L with the highest VS and TS reduction. Higher concentrations of CaCl2 (≥3 g/L) caused a reduction in the degradability of volatile and total solids and, as a result, a decreased performance of the digester. Conclusion: The results clearly confirmed that the addition of calcium chloride was an effective solution to improve biodegradability in co-digestion of the MSW and leachate and consequently to reduce the total and volatile solids and to increase the amount of‌ biogas.

Background and aims: Inappropriate solid waste management industry in recent years has created a lot of risks. As a result, the health, safety and the humans environment is at risk for it. main objective of this study is solid waste management assessment of 10 large food industries in Tehran. Methods: This study is descriptive and sectional based on field visits, questionnaires, preparation of the database and the analysis of the results. The selected units were categorized based on ISWMI scale. The questionnaire consisted of 47 questions related with key elements of industrial solid waste management. This questions consist of 10 separate areas. 10 large industrial units of the food industry in Tehran were randomly selected. Results: The results showed that the index of selected industrial units based on ISWMI scale (based on100) is: 96 for J company (very good), 49 for A company (week), 85 for H and I company (very good), 72 for E, 77 for F and 80 for G (good), 57 for B, 63 for C and 64 for D company (moderate). Conclusion: According to the results of this study, industrial waste management situation in most of the selected units are above average. However it seems that factors such as a lack of senior management commitment and belief to implementation of the waste management system, the lack of requirement industrial units to employ an expert in environmental or environmental health and the lack of a comprehensive at the national level plan for waste management of the most effective factors to determine ISWMI values in industries.

Background and aims: Fossil fuels Emission and their limited resources make to use renewable energy with more sustainable energy sources and less minimal environmental impacts. One of the most appropriate renewable energies considered lots of advantages including being renewable and environmentally friendly and containing social and economical interests, is Biomass. “Biomass” means a power source that is comprised of, but not limited to, combustible residues or gases from forest products manufacturing, waste, byproducts, or products from agricultural and orchard crops, waste or co-products products from livestock and poultry operations, waste or byproducts from and food processing, urban wood waste, municipal solid waste, municipal liquid waste treatment operations, and landfill gas. Due to the wide availability of biomass worldwide, mainly because it can be obtained as a by-product of many industrial and agricultural processes, biomass represents a growing renewable energy source with high growth potential. Biomass helps reduce the amount of GHG that give more impact to global warming and climate change. The biomass emissions level is far smaller compared to fossil fuels. The basic difference between biomass and fossil fuels when it comes to amount of carbon emissions is: all the CO2 which has been absorbed by plant for its growth is going back in the atmosphere during its burning for the production of biomass energy. While the CO2 produced from fossil fuels is going to atmosphere where it increases greenhouse effect. Another great advantage of biomass energy is that it is an indigenous fuel. The fuels from biomass materials can be produced locally and no high technology is required. Producing fuel from biomass materials reduces the dependence of a country on foreign resources for their fuel requirements. Moreover, since this indigenous fuel is labor intensive, it can contribute to the generation of new jobs, particularly in rural and farming communities. The number of employed workers required is 3-6 times greater than the fossil energy production in the associated processes. This study was aimed to identification and green grading of environmental management in that’s jobs. Some other socio-economic benefits can be counted such as slowing down the migration from the rural areas to cities, decreasing the issues associated with rapid urbanization, and developing a biodiesel production industry. Among its great benefits is the forest use of the territory, which would also serve to clean the forest and thus prevent forest fires, and the ability to generate jobs. Biomass generates continuous employment such as the extraction of raw materials from the countryside and the bush. This study was aimed to identification and green grading of environmental management in that’s jobs. The research questions are: 1. What are green job indicators? and 2. has renewable energy biomass business indicators of green jobs? Methods: This study was qualitative – quantitative, first according to the grounded theory qualitative method semi-deep interviewed with 50 environmental experts in the Environmental Protection Agency, the municipality, faculty members of the universities, the natural resources and watershed management, agriculture ministry and NGOs active in the environment conducted a with purposeful sampling (snowball). Regarding qualitative data validation were used constant data comparison, reviewing the observers and handwriting by participants and use of foreign and expert researchers familiar with qualitative research as an observer. Then, data was analyzed using the grounded theory of open, axial and selective coding analyzed in MAXQDA software. Once coding categories emerge, the next step is to link them together in theoretical models around a central category that hold everything together. In order to explain the grounded theory, green jobs are considered as the central variable, and the main line of research is defined using reminders and diagrams around it, and finally the green indicators derived from it are developed. Based on them, researcher-made questionnaire was designed in a combination, closed response with 5-rate likert scale. In order to determine the validity of the questionnaire, the content validity was used with the lawshe model and with reviewing previous studies was determined, the scope of the questionnaire in greenness of the job, and the reliability of the questionnaire was obtained using Cronbachchr('39')s alpha coefficient for internal consistency. Cronbachchr('39')s alpha value for each research question was more than 0.7, the reliability of the questionnaire was approved. Also, the Cronbachchr('39')s alpha coefficient of the questionnaire was 0.890. In order to estimate the repeatability, the retest method and the ICC index were used that index was 0.996 (p <0.001), indicating its high repeatability. For estimating the results of greenness and its degree in the jobs of renewable energy biomass, were used statistical analysis of Kolmogrov-Smirnov test, single-sample t-test and Friedman test in SPSS software. Result: Findings of the qualitative research on the structure of green job identification and prioritization were discussed in six categories including establishment in accordance with the legal and technological infrastructure of the green job as context, green job as a phenomenon, environmental pollution elimination and the health risks reduction of the community as causal conditions, green management as operational strategies, environmental empowerment of jobs as an intermediary conditions and economic and environmental benefits as a consequence. The results of quantitative to showed that jobs studied are considered green jobs and their green grading are as follows: 1. Maintenance (mean=5/61), 2. System Design (mean=4/83), 3. Training (mean=4/22), 4. Quality Monitoring and Quality (mean=4/03), 5. Collection (mean=3/64), 6. Manufacturer (mean=3/61) and 7. Worker and System Administrator (mean=2/06). According to the results, components of green jobs are defined including: (1. explaining Green Jobs, Productivity of Occupations, 2. environmental Protection and Health, 3. Green potentials and incentives, 4. environmental Standards and Indices of Health and Green Management, 5. environmental and health challenges and solving energy crisis with the help of green jobs, 6. environmental education and green culture, 7.environmental empowerment through a variety of environmental and health education, informing and accompanying NGOs, 8. economic-ecological profitability and the optimistic approach to economic interests (green economy) and impact of economic issues, profitability, financial support, market regulation, and return on investment in the process of greening and green expanding businesses). Results show that green indices of occupations are 1- environmental and health of profile occupational, 2- strengths and weaknesses, threats and opportunities green jobs, 3- green supply chain management of businesses, 4- impact of green jobs on sustainable development and community health, 5- effect of environmental education on the green performance of occupations, the impact of environmental advertising on green performance and 6- reduce employee costs and increase business profits through environmental management. These green jobs literature extols the virtues of generating energy using “wood waste and other byproducts, including agricultural byproducts, ethanol, paper pellets, used railroad ties, sludge wood, solid byproducts, and old utility poles. Several waste products are also used in biomass, including landfill gas, digester gas, municipal solid waste, and methane. Conclusion: The green features of the biomass business are included solving the problem of fossil fuels, caused by fossil energy and renewable energy sources. identification and green grading jobs diversifying energy sources, sustainable development, securing energy, removing environmental and health problems would help to managers and policy makers for identifying and providing executive solutions and identifying multifaceted priorities for green management. Despite the high potential of bio-economy in renewable energy (biomass) and high amounts of raw materials in the agricultural waste and sewage has not been fully realized. To achieve of developing a competitive economy, low-carbon resources with efficient resources, global economic markets have shifted strategy towards renewable energies, so as to create green jobs in order to reduce environmental problems (waste and climate change). For performance of macroeconomic policy in notification Supreme Leader on the restructuring of the countrychr('39')s economic structure has proposed policies to change reducing dependencies on fossil fuels and external resources towards the creation and development of green jobs in the field of renewable energy, especially biomass, because there are a lot of raw materials in the country, especially in the villages and without necessary to high technologies. Biomass development increase energy efficiency, the use of renewable energy resources and the creation of a favourable environment for investment in energy efficiency measures and the generation of ‘green’ jobs. The rural development prospects for green job growth are mixed. Rural areas contain biomass feedstocks which will be increasingly relied upon to offset fossil fuel dependencies. The distribution of those feedstocks, however, is not uniform across rural areas. Furthermore, the technologies to convert those feedstocks into fuels and other uses are yet to be demonstrated at commercially successful scales. Both policy development and research activities should be focused on the efficient utilization of rural natural resources, human capital, and rural infrastructure in achieving national green policies. The green economy appears to be fertile ground for unbiased, academic research to examine some of the regional consequences of green jobs growth and green jobs policies, to include an examination of rural opportunities, but going well beyond that dimension to include the integration of statewide and multi-state regional development opportunities as well as consequences. This study was not about raw materials (waste and sewage) to produce renewable energy biomass, and it is possible that this section may also be effective in the creation and development of green jobs, then there may be restrictions on the generalized findings, interpretations, and attributes of the causation of variables. Therefore, it is suggested that future research into this part of the process of producing renewable energy biomass should be considered.

Background and Objectives: Given that no comprehensive studies have yet been conducted on treatment of infectious wastes in hospitals of Qom City, this research was performed with the purpose of investigating the treatment methods used in these hospitals and monitoring the performance of waste elimination devices. Methods: Required information was obtained through in-person visit and observing the current situation, and the variables affecting waste treatment were extracted based on the type of treatment systems, and were collected, and accordingly, biological monitoring tests were designed for the studied hospitals. The data were analyzed using Fisher's exact test. Results: In this study, from 9 active hospitals in Qom Province, only 3 hospitals were equipped with waste treatment system. In hospital A, growth of Bacillus stearothermophilus spore were observed in 6.25% of the samples, while no microbial growth was recorded in hospital B. The initial investment to buy the machine in hospital A was about four times than that of hospital B. Conclusion: The findings of this study showed that treatment device of hospital B is more appropriate compared to the devices of hospital A due to complete destruction of spores, lower cost (for purchase), and maintenance. .

Background and Aim: Among the medical wastes, dental wastes have a high diversity and due to its high contents of hazardous, toxic, and pathogenic agents, therefore these wastes are of great importance. The aim of this study was to investigate and analyze the amount of waste produced in dentistry offices in Birjand. Materials and Methods: In this descriptive cross-sectional study, 48 dental offices in the city of Birjand were studied. Sampling was carried out by environmental health experts in three consecutive working days (Monday, Tuesday, and Wednesday) from every center. The Samples were divided into 5 categories such as semi-domestic, infectious, chemical-pharmaceutical, toxic and sharp material, Separated and weighed using a laboratory scale. Information was expressed as percentage by weight. Results: Based on the results, the total amount of waste produced in dental offices in Birjand was 7848.02 kg / year. percentages of semi-domestic, infectious, chemical-pharmaceutical, sharp material, and toxic wastes were 54.3%, 29.7%, 11.8%, 3.9% and 0.11% respectively. Conclusion: Considering the high volume of dental waste, especially infectious and hazardous materials, the need for separation and recycling in the office is evident. It is necessary to manage the wastes and their separation and recycling in source place.

The energy management of ships to improve the efficiency of ships and reduce greenhouse gas emissions is among the most important issues that have been considered as a milestone in designing and constructing of vessels in recent years. The study of energy trends and attention to technological changes and the importance of more stringent environmental standards in recent years have led to a major challenge in relation to air pollution, energy management, and exposure to end-of-life sources of fossil fuels. In recent years, focus on current fuels and technologies in vehicles has led to a major challenge regarding air pollution, greenhouse gas emissions, energy security, and also exposure to exhausting sources of fossil fuels. Now days, Hybrid propulsion systems are one of the solutions that are being followed in many countries to solve this problem. In this paper, after introducing the hybrid system; conceptual design and determination of a suitable hybrid system for vessels have been investigated. Then the calculations and relations dominating the hybrid parallel system of vessel are presented. The modeling is also done using the ADVISOR software run in the Simulink platform of the MATLAB for both conventional and hybrid systems. The results show that parallel hybrid vessel has improved by 7% in total efficiency and 7.1% for consumption. In addition, HC and CO emissions have been decreased by 0.44% and 0.39%, respectively.

"n "nBackground and Objectives: Experiments were conducted to investigate the behavior of Moving Bed Biofilm Reactor (MBBR) as a novel aerobic process for treatment of aniline synthetic wastewater as a hard biodegradable compound is commonly used in number of industrial processes. The objective of this paper is evaluation of MBBR in different conditions for treatment of aniline and determination of reaction kinetics."nMaterials and Methods: In the MBBRs, different carriers are used to maximize the active biofilm surface area in the reactors. In this study, the reactor was filled with Light Expanded Clay Aggregate (LECA) as carriers. Evaluation of the reactor efficiency was done at different retention time of 8, 24, 48 and 72 hours with an influent COD from 100 to 3500 mg/L (filling ratio of 50%). After obtaining removal efficiencies, effluent concentration of aniline was measured by adsorption spectrum and maladaptive municipal wastewater treatment plant sludge in batch conditions for confidence of aniline biodegradation and its adsorption to the sludge mass. "nResults:The maximum obtained removal efficiencies were 91% (influent COD=2000 mg/L) after 72 hours. Biodegradation of aniline in MBBR has been also approved by NMR spectrum tests. Finally experimental data has indicated that Grau second order model and Stover-Kincannon were the best models to describe substrate loading removal rate for aniline."nConclusion:biological treatment of aniline wastewater compared to other researchers methods.

Background and Objectives: The continuous increase in solid waste generation worldwide due to population growth and industrialization, calls for management strategies that integrate concerns for environmental sustainability. By quantifying environmental impacts of systems, Life Cycle Assessment (LCA) is a tool which can contribute to answering that call. The aim of this study was to evaluate environmental pollutants resulting from various treatment options including anaerobic digestion, incineration, and landfill of Municipal Solid Waste (MSW) generated daily in Tehran. Materials and Methods: First, the physical properties of the waste and consumption of inputs in the study area were determined from September to October, 2014- 2015. Then the different steps of LCA in relation to each of the subsystems were followed (with SimaPro software). Finally, the results based on the CML Baseline 2000 were presented and analyzed. Results: It was found that when the higher rate of separation and processing in any subsystems increases, the emission of environmental pollutants decreases, so that the global warming potential, acidification, eutrophication, and abiotic depletion as the most important impact categories in the subsystems of anaerobic digestion were obtained as -125935 kg CO2/day, -449 kg SO2/day, -1690 kg PO43-/day and -0.43 kg Sb/day, respectively and in incineration were obtained as -264872 kg CO2/day, -974 kg SO2/day, -3471 kg PO43-/day and -0.76 kg Sb/day, respectively, while in the landfill subsystem, they were estimated to be 74478 kg CO2/day, 362 kg SO2/day, 118 kg PO43-/day, and 0.13 kg Sb/day, respectively. Conclusion: According to the constituent processes of each of the subsystems and the results of the evaluation of exhaust emissions subsystems, it can be concluded that in an integrated system of waste management, the energy-generating systems such as anaerobic digestion and incineration should be as the first priority and the traditional subsystems such as landfill should be as the last priority.

Background and Objective: The steel industry is the worldchr('39')s largest consumer of energy. A large amount of iron waste is produced annually, which its use in the steel industry can be economic. The purpose of this study was to investigate the environmental impacts of the steelmaking from iron scrap as a raw material using a life cycle assessment (LCA) method. Materials and Methods: Simapro software and the ecoinvent database were used to conduct LCA. Data on the steel production process (raw materials, waste, and products) were collected by a questionnaire from a steel plant. Environmental burdens were quantified using ReCiPe, Cumulative Energy Demand (CED), IPCC) Intergovernmental Panel on Climate Change) and water footprints methods. Results: The results of the ReCiPe method showed that the terrestrial ecotoxicity with a value of 14392 kg 1,4-Dichlorobenzene (1,4-DCB) eq/ton of steel and global warming with 5289 kg CO2 eq/ton of steel, had the greatest environmental impact, respectively. The lowest environmental impact of this process was obtained for freshwater ecotoxicity and human carcinogenic toxicity. The carbon footprint resulting from steelmaking is 5.24 ton CO2 eq/ton of steel. The most important sector of the greenhouse gas producer is the consumption of electricity with a rate of 2900 of kg CO2 eq/ton of steel. The cumulative energy demand of one ton of steel ingot was 73393 MJ, which is three times the global equivalent. The total water footprint for one t of steel was 19.5 m3 of water, which is almost near to the equivalent in Europe. Conclusion: the use of iron scrap as raw material in the process of steelmaking instead of iron ore has reduced the amount of human toxicity potential and mineral resource consumption.

Considering that a significant portion of the share of energy consumption among consumer sectors is in the home and commercial sectors and this share is still increasing, there is a need for research in energy consumption management and evaluation of effective indicators in the building industry. Building the country is vital to optimizing energy consumption. One of the most appropriate ways to optimize fuel consumption in the building and housing sector is the implementation of zero energy buildings which is considered as the main solution in the world. In this research, after analyzing the population and statistical sample, data were collected to evaluate effective criteria and options related to energy consumption management. First, fuzzy Delphi method was used to evaluate the sub-criteria and select the main options of each. At first level the criterion is discussed and at the second level the data analysis and research model is analyzed through paired comparisons using fuzzy hierarchical analysis technique. Finally, the most important indicators and criteria are obtained using fuzzy hierarchical analysis. According to the research findings, among the energy consumption optimization management indices investigated by the FAHP method, the economic, construction and utilities indices with 0.333, 0. 201 and 0.176 have the highest management priority, respectively. Energy-efficient optimization has a zero-energy building approach.