• Energy Research
• Restricted close
• Embargo close
• other engineering and technologies close

This paper is focused on the measurement issues and procedures for the characterization of medium voltage grids for narrowband power line communications (NB-PLCs), in the perspective of the use and integration of such technology into smart grids communication networks. The fundamentals are given for the characterization of the PLC channel, by means of noise and attenuation measurements. Suitable procedures are also developed for the characterization and modeling of the power system components in the frequency range of interest. Furthermore, the complete model of the PLC system is experimentally validated in a real case study.

This paper proposes a linear programming problem to find the optimal planning and operation of aggregated distributed energy resources (DER), managed by an aggregator that participates in the day-ahead wholesale electricity market as a price-maker agent. The proposed model analyzes the impact of the size of the aggregated resources and gives the optimal planning and management of DER systems, and the corresponding energy transactions in the wholesale day-ahead market. The results suggest that when the aggregated resources are large enough, DER systems can achieve up to 32% extra economic benefits depending on the market share, compared with a business-as-usual approach (not implementing DER systems). info:eu-repo/semantics/draft

The International Building Physics Toolbox (IBPT) is a software library developed originally for heat, air and moisture system analysis in building physics. The toolbox is constructed as a modular structure of standard building elements, using the graphical programming language Simulink. To enable development of the toolbox, a common modelling platform is defined: a set of unique communication signals, material database and documentation protocol. The IBPT is an open source and available on the Internet. Any user can utilize, expand and develop the contents of the toolbox. This paper presents structure and essence of the library. Potential applications of the toolbox are illustrated through examples. (C) 2006 Elsevier B.V. All rights reserved.

In this paper some preliminary experimental results on a Zebra battery based propulsion system for urban bus applications are presented. The tests were carried out using a laboratory 1:1 scale test bench, composed by a 65 kW electric drive, specifically designed for urban bus applications, supplied by two 20 kWh Zebra batteries connected in parallel. The electric power train was tested on a laboratory bench, connected through a fixed ratio gear box to a 100 kW regenerative electric brake provided with speed and torque controls, in order to evaluate the propulsion system performance in steady state operative conditions. The obtained preliminary experimental results were utilized to implement a Matlab-Simulink model of urban bus, which might be powered by the same electric propulsion system studied. Thanks to this model it was possible to evaluate the dynamic behavior of the urban bus, working on standard driving cycles, taking into account the resistant forces represented by proper vehicle/road/aerodynamic parameters. An evaluation of the expected real vehicle driving range was also estimated in different road conditions.

A methodology for the sizing of domestic hot water heating and storage systems is defined, by assuming an extreme operating condition cycle composed of only two parts, a water consumption period and a system repositioning period. In both parts to respond to the extreme hot water demanding conditions, the heating is always on. The subsequent exergy analysis of this domestic hot water production system compares the irreversibility and the exergy efficiency of the water storage and the tankless situation. To carry out such analysis, some basic assumptions were made: a constant temperature heat source, a short duration operating cycle and a constant thermal energy supply. Under these circumstances it is shown that the hot water storage system leads to lower exergy losses while the tankless system is more exergy efficient, but requiring a higher instantaneous thermal power input. The use of the joule effect electricity, as the system heat source, be it a water storage one or a tankless one, maximizes the system irreversibility losses and minimizes the system exergy efficiency. The tankless system, with the joule effect electricity heat source is the worst situation.

This paper aims to correlate the in-cylinder soot formation and the exhaust particle emissions for different methods of gasoline/ethanol fueling in spark ignition engine. In particular, the engine was fueled with gasoline and ethanol separately and not, in this latter case both blended (E30) and dual fueled (EDF). For E30 the bend was direct injected and for EDF, the ethanol was injected in the combustion chamber and the gasoline into the intake duct. For both the injection configurations, the same percentage of ethanol in gasoline was supplied: 30%v/v. The measurements were carried out at 2000 and 4000 rpm, under full load, and stoichiometric condition, in small single cylinder optical engine. 2D-digital imaging was performed to follow the combustion process with a high spatial and temporal resolution through a full-bore optical piston. The two-color pyrometry was applied for the analysis of the in cylinder soot formation in the combustion chamber. Particle mass concentration was evaluated at the exhaust by means of a smoke meter. The particle size distribution function was measured in the range from 5.6 to 560 nm by an Engine Exhaust Particle Sizer (EEPS). It was observed that the use of ethanol allows the reduction of soot formation and particles emission in DI configuration. However, for E30 the in-cylinder soot formation and emissions are larger than EDF. This result is mainly due to the different contribution of gasoline. Optical analysis shows that in E30 the direct injected gasoline causes wide diffusive flames where soot formation is promoted; whereas for EDF the better evaporation and mixing of gasoline, typical of PFI configuration, results in few, small, and localized diffusive flames producing smaller particle emissions.

The use of methane as supplement to liquid fuel is one of the solution proposed for the reduction of the internal combustion engine pollutant emissions. Its intrinsic properties as the high knocking resistance and the low carbon content makes methane the most promising clean fuel. The dual fuel combustion mode allows improving the methane combustion acting mainly on the methane slow burning velocity and allowing lean burn combustion mode. An experimental investigation was carried out to study the methane-gasoline dual fuel combustion. Methane was injected in combustion chamber (DI fuel) while gasoline was injected in the intake manifold (PFI fuel). The measurements were carried out in an optically accessible small single-cylinder four-stroke engine. It was equipped with the cylinder head of a commercial 250 cc motorcycles engine representative of the most popular two-wheel vehicles in Europe. UV-visible spectroscopy measurements were performed to analyze the combustion process with high spatial and temporal resolution. In particular, UV-visible spectroscopy allows detecting the chemical markers of combustion process such as the radicals OH* and CH*. The in-cylinder lambda spatial and temporal evolution was evaluated. The combustion evolution is characterized by means of a high speed cycle resolved camera. The exhaust emissions were characterized by means of gaseous analyzers. The measurements were performed under steady state conditions at different engine operating conditions.

Capítulos en libros This paper studies the damping of electromechanical oscillations making use of both the ratio and phase modulation capabilities of static synchronous series sources. The design of the static synchronous series source damping controllers is addressed using eigenvalue sensitivities. The eigenvalue sensitivity with respect to a parameter of a feedback controller estimates the eigenvalue shift when such parameter is changed. The controller design comprises two steps: the design of the phase compensation network and the calculation of the controller gain. A combined method is developed to take advantage of both ratio and phase modulating capabilities of static synchronous series sources. Once the phase controller has been designed and incorporated into the system model, the ratio controller has to be designed taking into account the effect of the phase controller due to the direct relationship between the input of the ratio controller and the phase itself. The suggested approach is illustrated in a simple test system. info:eu-repo/semantics/publishedVersion