• Energy Research
• other engineering and technologies close
• 7. Clean energy close
• Renewable Energy close

Abstract This study sought to quantify and characterize cassava waste as fuel. The wastes from three cultivars were collected to study and were divided into three distinct parts of the cassava plant: seed stem, thick stalks, and thin stalks. Physical and chemical analyzes were carried out to determine the elemental composition of the waste: volatile matter; fixed carbon; ash; moisture; lignin; cellulose; hemicellulose; ash composition and higher heating value were determined. We conducted a thermogravimetric analysis in oxidizing and inert atmospheres to study the behavior of the waste as fuel. The root productivity obtained ranged from 7.7 to 13.0 t ha−1 yr−1 on a dry basis (db), and the ratio between waste and roots varied from 0.36 to 0.91. The physical and chemical properties of cassava waste are analogous to those of woody biomass regarding the elemental composition, the higher heating value, and thermogravimetric analysis. Ash content varied from 2.5% to 3.5%, reaching around 6.0% in samples unwashed. Approximately 60% of the ashes are alkali oxides, especially P2O5, K2O, and CaO, which have low melting points. The alkali index calculated suggests that there is a strong tendency that the combustion process leads to ash fouling and the formation of ash deposits.

In order to exploit renewable energies from tidal stream, tandem propellers of a unique counter-rotating type horizontal-axis tidal turbine was firstly designed based on the blade element momentum (BEM) theory. And then a multi-objective numerical optimization method coupled the response surface method (RSM) with the genetic algorithm (GA) was employed to obtain desirable blade profiles. The front blade pitch angle distribution was taken as optimization variable in this paper, as it plays an important role in affecting the inlet conditions of the rear blade. The numerical results show that both optimization objectives of power coefficient and thrust coefficient can be significantly improved. It was verified that the performance of the power unit with the optimized blades increases obviously by optimizing the pitch angle.

This paper presents a multi-objective optimization model for a long-term generation mix in Indonesia. The objective of this work is to assess the economic, environment, and adequacy of local energy sources. The model includes two competing objective functions to seek the lowest cost of generation and the lowest CO2 emissions while considering technology diffusion. The scenarios include the use of fossil reserves with or without the constraints of the reserve to production ratio and exports. The results indicate that Indonesia should develop all renewable energy and requires imported coal and natural gas. If all fossil resources were upgraded to reserves, electricity demand in 2050 could be met by domestic energy sources. The maximum share of renewable energy that can be achieved in 2050 is 33% with and 80% without technology diffusion. The least cost optimization produces lower generation costs than the least CO2 emissions, as well as the combined scenario. Total CO2 emissions in 2050 are five to six times as large as current emissions. The least CO2 emissions scenario can reduce almost half of the CO2 emissions of the least cost scenario by 2050. The proposed multi-objective optimization model leads some optimal solutions for a more sustainable electricity system.

[EN] Renewable energies are a central element in the search for energy sustainability, so they are becoming a substantial component of the energy scenario of every country, both as systems connected to the grid or in stand-alone applications. Feasibility of these renewable energy systems could be necessary not only in their application in isolated areas, but also in systems connected to the grid, in this last case when their contribution reaches a substantial fraction of the total electricity demand. To overcome this reliability problem, hybrid renewable systems could become essential and activities to optimize their design should be addressed, both in the simulation and in the experimental areas. In this paper, a laboratory to simulate and verify the reliability of hybrid renewable systems is presented and its application to the feasibility analysis of multicomponent systems including photovoltaic panels, wind generator and biomass gasification plant, plus energy storage in a battery bank, are described.

A new sizing approach is applied in this paper to stand-alone PV systems design, which is based on systems configurations without shedding load. The investigation is based on a detailed study of the minimum storage requirement and an analysis of the sizing curves. The analysis reveals the importance of using daily series of measured solar radiation data instead of monthly average values. For high-reliability systems, it is important that these data series are as long as possible, while the configuration of large generator and small battery seems to deal better with the unpredictability of solar radiation.

Abstract Breastshot water wheels are gravity hydraulic machines employed in low head sites. The scope of this work is to test the performance of a breastshot water wheel with two geometric inflow configurations: a sluice gate at different openings and two vertical overflow weirs. With the sluice gate, the maximum efficiency of the plant is 75%, constant over a wide range of flow rates, while the efficiency with the weir is increasing in the same flow rate range. Therefore, the wheel with the weir can exploit higher water volumes, and also it performs better at high power input. In practical applications, the inflow configuration can be effectively controlled to optimize the operative working conditions of breastshot water wheels, depending on the external hydraulic ones. The experimental results are also discussed in dimensionless terms, in order to support engineers in the design of similar breastshot water wheels.

Conventionally assessing of turbine performance was done by conducting model experiments which at times become costly and time consuming for several design alternatives in design optimization. Recently, computational fluid dynamics (CFD) has become a more cost effective tool for predicting detailed flow information in turbine space to enable the selection of the best design. With the growth of computational mechanics, the virtual hydraulic machines are becoming more and more realistic to get minor details of the flow, which are not possible in model testing. The inverse design technique and fully 3-dimensional flow simulations were performed early to manufacture the newly developed runner. It allows a quick and efficient improvement and optimization of turbine components. The system has been applied to the optimization of a Francis turbine runner for a turbine replacement project. In present work, 3D turbulent real flow analyses in hydraulic Francis turbine have been carried out at four guide vane opening at constant rotational speed using Ansys CFX computational fluid dynamics (CFD) software. The newly developed runner from reverse engineering and CFD results show an enhanced performance. The average values of flow parameters like velocities and flow angles at the inlet and outlet of runner, guide vane and stay vane of turbine are computed to derive flow characteristics. The aim was to analyze the flow behavior and pressure distribution to further fine-tune the whole numerical experiment to achieve the level of accuracy necessary for the concept design of a revitalized turbine. The obtained results are in good agreement with the in site experiments, especially for the characteristic curve.

Abstract A requirement for the development of a viable biomass conversion technology for clean energy production is the efficient cleaning of the gas fraction. The aim of this work was to use fly ash (AF) to develop cheap and efficient catalysts in removing tar. FA was separated in two fraction, oxide fly ash (OFA) and unburned carbon (UCFA) and both were used for catalysts preparing. The toluene was used as a tar model and a fixed-bed reactor for testing. The calcined oxide fly ash (COFA) showed a steady decrease in catalytic activity, the removal efficiency was reduced by 13.52% after 3 h. Reduced catalyst (RCOFA) and activated and reduced catalyst (AROFA) showed a higher activity than COFA catalyst and were able to maintain their performance. The RCOFA catalytic activity decreased suddenly when the steam was present, and tar removal efficiency descended to 57.32% after only 3 h and to 49.03% after 5hrs, respectively. Results showed that the catalysts obtaining by mixing RCOFA/AROFA with UCFA led to high effective toluene conversion in a reforming environment, over 90% and their catalytic activity remained constant after 12 h, because the unburned carbon presence kept the iron in its reduced form, much more catalytically active.

Abstract In this article, an attempt is made to better understand the contribution of hydropower in meeting electric energy needs of Turkey. Thus, a comparison between Turkey and other countries, which have some similarities with Turkey or which are more developed nations compared to Turkey, for evaluating from different aspects the contribution of hydropower in meeting electric energy needs is performed. The producers of electricity and hydroelectricity in the world, and the electric sectors of all the selected countries are firstly examined. Thereafter, Turkey's water resources and its potential, hydropower potential, and current status of hydropower in Turkey are investigated in detail. A detailed discussion regarding economic and energy indicators, hydroelectricity versus thermal electricity, the contributions of hydroelectricity to the total and renewable electricity generation, and the usage status of hydro potential of each selected nation is also made. Finally, it is found that hydropower is the second largest contributor in meeting Turkey's electric energy needs after thermal, mainly natural gas. It is also estimated that the contribution of hydropower will continue because a vast amount of its economically feasible hydro potential (about 64%) is undeveloped. Besides, it is determined that the contribution of hydropower in the total electricity generation in Turkey is greater than that of China and India, but it is lower than that of Norway, Brazil, and Canada.