• Energy Research
• Open Access close
• medical and health sciences close
• 7. Clean energy close

Building, bridge or wind turbine maintenance requires manual dexterity tasks by a specialist rope-access trained workforce via two principal means: harness suspension of individual workers from above, or deployment of a suspended platform or cradle from which workers access the structure to be maintained. Currently no published research compares accuracy and efficiency of simulated maintenance tasks between these modalities. This study investigated manual dexterity task performance of peg placement and shape delineation in seated, standing and suspended environments in 16 healthy controls and 26 professional rope-access trained individuals. Both seated and standing assessments were superior to those suspended, and height of suspension, total mass and years of experience had no influence on the task outcome. These findings suggest that, where feasible, cradle suspension mechanisms which permit standing maintenance are favourable in terms of task efficacy and where feasible, should be considered for deployment in wind energy and other engineering applications.

The formation and decay of excited states of light‐harvesting bacteriochlorophyll (BChl) molecules and primary charge separation in reaction centres (RCs) of pigment‐protein complex B890 of the purple bacterium Chromatium minutissimum were studied as a function of excitation wavelength by means of picosecond absorbance difference spectroscopy. Selective excitation in the RC absorption band (at 800 nm) induced rapid bleaching of the absorption band of the RC BChl dimer (τ ∼ 1 ps) without absorption changes due to excited light‐harvesting BChl. It is concluded that excitation energy transfer from the BChl dimer of the RC to light‐harvesting BChl molecules is considerably slower than RC charge separation. Therefore, energy transfer from the light‐harvesting antenna to the RC in bacterial photosynthesis may be described as a ‘migration‐limited model’.

A noncompartmented microbial fuel cell (NCMFC) composed of a Mn(IV)-carbon plate and a Fe(III)-carbon plate was used for electricity generation from organic wastewater without consumption of external energy. The Fe(III)-carbon plate, coated with a porous ceramic membrane and a semipermeable cellulose acetate film, was used as a cathode, which substituted for the catholyte and cathode. The Mn(IV)-carbon plate was used as an anode without a membrane or film coating. A solar cell connected to the NCMFC activated electricity generation and bacterial consumption of organic matter contained in the wastewater. More than 99 degrees of the organic matter was biochemically oxidized during wastewater flow through the four NCMFC units. A predominant bacterium isolated from the anode surface in both the conventional and the solar cell-linked NCMFC was found to be more than 99 degrees similar to a Mn(II)-oxidizing bacterium and Burkeholderia sp., based on 16S rDNA sequence analysis. The isolate reacted electrochemically with the Mn(IV)-modified anode and produced electricity in the NCMFC. After 90 days of incubation, a bacterial species that was enriched on the Mn(IV)-modified anode surface in all of the NCMFC units was found to be very similar to the initially isolated predominant species by comparing 16S rDNA sequences.

The conceptualization of the Shared Socioeconomic Pathways (SSPs) framework represented a major leap in scenario development in the context of global environmental change and sustainability, providing significant advances from the previous scenario frameworks-especially the Intergovernmental Panel on Climate Change (IPCC) Special Report on Emissions Scenarios. It is highly likely that the SSP concept, along with its scenario narratives and their respective results, including land-use change projections, will play a substantial role in the forthcoming Sixth Assessment Report by the IPCC. Here, we offer some insights that could make the SSPs' projected future changes in global land use more comprehensive and also help improve the interpretability of such projections. For example, instead of focusing on the quantity of each land-use class at various time points which results only in a net change when change is detected between time points, we recommend that the projected gross gains and gross losses in each land-use class across all scenarios should also be considered. Overall, the insights presented could also help pave the way for stronger collaboration between the SSP-climate science community and the land system science community; such collaboration is much needed in addressing the challenges of global environmental change towards a climate-resilient sustainable development pathway.

Production of fuels and chemicals through microbial fermentation of plant material is a desirable alternative to petrochemical-based production. Fermentative production of biorenewable fuels and chemicals requires the engineering of biocatalysts that can quickly and efficiently convert sugars to target products at a cost that is competitive with existing petrochemical-based processes. It is also important that biocatalysts be robust to extreme fermentation conditions, biomass-derived inhibitors, and their target products. Traditional metabolic engineering has made great advances in this area, but synthetic biology has contributed and will continue to contribute to this field, particularly with next-generation biofuels. This work reviews the use of metabolic engineering and synthetic biology in biocatalyst engineering for biorenewable fuels and chemicals production, such as ethanol, butanol, acetate, lactate, succinate, alanine, and xylitol. We also examine the existing challenges in this area and discuss strategies for improving biocatalyst tolerance to chemical inhibitors.

We experimentally evaluated the proton beam dose reproducibility, sensitivity, angular dependence and depth‐dose relationships for a new Metal Oxide Semiconductor Field Effect Transistor (MOSFET) detector. The detector was fabricated with a thinner oxide layer and was operated at high‐bias voltages. In order to accurately measure dose distributions, we developed a practical method for correcting the MOSFET response to proton beams. The detector was tested by examining lateral dose profiles formed by protons passing through an L‐shaped bolus. The dose reproducibility, angular dependence and depth‐dose response were evaluated using a 190 MeV proton beam. Depth‐output curves produced using the MOSFET detectors were compared with results obtained using an ionization chamber (IC). Since accurate measurements of proton dose distribution require correction for LET effects, we developed a simple dose‐weighted correction method. The correction factors were determined as a function of proton penetration depth, or residual range. The residual proton range at each measurement point was calculated using the pencil beam algorithm. Lateral measurements in a phantom were obtained for pristine and SOBP beams. The reproducibility of the MOSFET detector was within 2%, and the angular dependence was less than 9%. The detector exhibited a good response at the Bragg peak (0.74 relative to the IC detector). For dose distributions resulting from protons passing through an L‐shaped bolus, the corrected MOSFET dose agreed well with the IC results. Absolute proton dosimetry can be performed using MOSFET detectors to a precision of about 3% (1 sigma). A thinner oxide layer thickness improved the LET in proton dosimetry. By employing correction methods for LET dependence, it is possible to measure absolute proton dose using MOSFET detectors.PACS number: 87.56.‐v

The noise level for working arc furnace has been measured. Arc furnaces were found to be the source of infrasounds and acoustic field. The sound pressure levels for infrasounds range from 55 to 77 dB. It has been showed that particular noise level includes the onethird-octave band with middle frequency 100 Hz. The sound pressure levels in this band range from 105 to 110 dB.

Global energy consumption has risen enormously over the past century due to population growth and increasing energy use per person. Industrial production consumes a significant portion of global energy resources. Thus, industrial sector’s investment in energy efficiency is critical to a sustainable future. For most global enterprises the consumption of energy and natural resources represents a major overhead and developing sustainable energy policies can represent a significant competitive advantage due to the growing price of energy and volatility of supply. This symbiotic relationship can lead to the mutual benefits of increasing industrial efficiency whilst allowing the transition to a sustainable renewables-based energy future and needs to be significantly harnessed. This paper describes a decision support framework to help industrial organisations make positive investment decisions on energy performance improvement projects.