• Energy Research
• clinical medicine close
• English close

OBJECTIVE: The objective of the present study was to investigate the effect of epipregnanolone on the influence of neurosteroids on the development of rapid tolerance to the motor impairing and hypothermic effects of ethanol. METHOD: Experiment 1: on Day 1 groups of mice were pretreated with saline or with epipregnanolone. After 30 min each group was further divided in subgroups that received ethanol or saline. Thirty, 60 and 90 min after the injections the animals were tested on the rota-rod or the body temperature was measured. On Day 2 all groups received ethanol and a similar procedure was followed to evaluate rapid tolerance. Experiment 2 and 3: On Day 1 groups of mice were treated with epipregnanolone and after 15 min each group was divided into three groups in order to receive pregnenolone sulfate, dehydroepiandrosterone sulfate or saline. Thirty minutes later, each group was further divided into two subgroups in order to receive ethanol or saline, respectively, and 30, 60 and 90 min later the animals were tested as in the experiment 1. On Day 2 all groups received ethanol and a similar procedure was followed to evaluate rapid tolerance. RESULTS: Pretreatment with epipregnanolone (0.10-0.30 mg/kg) significantly blocked the development of tolerance to the motor impairing and hypothermic effects induced by ethanol in mice. Considering tolerance to ethanol-induced motor impairment, epipregnanolone (0.15 mg/kg) reversed the stimulatory action of dehydroepiandrosterone sulfate (0.15 mg/kg), but did not affect the actions of pregnenolone sulfate (0.08 mg/kg). Moreover, epipregnanolone prevented the inhibitory action of allotetrahydrodeoxycorticosterone (0.10 mg/kg). In relation to ethanol-induced hypothermia, the results showed that pretreatment with epipregnanolone (0.30 mg/kg) significantly prevented the stimulatory action of dehydroepiandrosterone sulfate and pregnenolone sulfate, as well as the inhibitory action of allotetrahydrodeoxicorticosterone (0.20 mg/kg), on tolerance to this effect. CONCLUSIONS: The results suggest a differential interaction between neurosteroids that might modulate the development of rapid tolerance to ethanol.OBJETIVO: O objetivo do presente estudo foi o de investigar o efeito da epipregnanolona sobre a influência de neuroesteróides no desenvolvimento da tolerância rápida aos efeitos de incoordenação motora e hipotermia induzidos pelo etanol. MÉTODO: Experimento 1: no Dia 1, grupos de camundongos foram pré-tratados com salina ou com epipregnanolona. Após 30 min, cada grupo foi subdividido recebendo etanol ou salina. Aos 30, 60 e 90 min após as injeções, os animais foram testados no rota-rod ou a temperatura corporal foi avaliada. No Dia 2, todos os grupos receberam etanol e um procedimento similar foi seguido para avaliar a tolerância rápida. O pré-tratamento com a epipregnanolona (0,10-0,30 mg/kg) bloqueou significantemente o desenvolvimento da tolerância aos efeitos de incoordenação motora e hipotermia induzidos pelo etanol em camundongos. Experimento 2 e 3: no Dia 1, grupos de animais foram tratados com epipregnanolona e, após 15 min, cada grupo foi dividido em três grupos para receber sulfato de pregnanolona, sulfato de dehidroepiandrosterona ou salina. Após 30 min, cada grupo foi dividido em dois subgrupos para receber etanol ou salina, respectivamente, e após 30, 60 e 90 min os animais foram testados como no experimento 1. No Dia 2, todos os grupos receberam etanol e 30 min após foram testados como mencionado no experimento 1. RESULTADOS: Considerando a tolerância ao prejuízo motor induzido pelo etanol, a epipregnanolona (0,15 mg/kg) bloqueou a ação estimulatória do sulfato de dehidroepiandrosterona (0,15 mg/kg), mas não afetou a ação do sulfato de pregnanolona (0,08 mg/kg). Entretanto, a epipregnanolona bloqueou a ação inibitória da alotetrahidrodeoxicorticosterona (0,10 mg/kg). Em relação à hipotermia induzida pelo etanol, os resultados demonstraram que o pré-tratamento com epipregnanolona (0,30 mg/kg) bloqueou significantemente a ação estimulatória do sulfato de dehidroepiandrosterona e do sulfato de pregnanolona, bem como a ação inibitória da alotetrahidrodeoxicorticosterona (0,20 mg/kg) sobre a tolerância. CONCLUSÕES: Os resultados sugerem uma interação diferencial entre os neuroesteróides sobre o desenvolvimento da tolerância rápida ao etanol.

A SOFC (solid oxide fuel cell) cycle running on natural gas was integrated with a ST (steam turbine) cycle. The fuel is desulfurized and pre-reformed before entering the SOFC. A burner was used to combust the remaining fuel after the SOFC stacks. The off-gases from the burner were used to produce steam in a HRSG (heat recovery steam generator). The bottoming steam cycle was modeled with two configurations: (1) a simple single pressure level and (2) a dual pressure level with both a reheat and a pre-heater. The SOFC stacks in the present SOFC-ST hybrid cycles were not pressurized. The dual pressure configuration steam cycle combined with SOFC cycle (SOFC-ST) was new and has not been studied previously. In each of the configuration, a hybrid recuperator was used to recovery the remaining energy of the off-gases after the HRSG. Thus, four different plants system setups were compared to each other to reveal the most superior concept with respect to plant efficiency and power. It was found that in order to increase the plant efficiency considerably, it was enough to use a single pressure with a hybrid recuperator instead of a dual pressure Rankine cycle.

The focus of this paper is how we can facilitate problem based learning (PBL) more creatively. We take a closer look upon the connection between creative processes and social communication in the PBL group including how difficulties in the social interplay may hinder creativity. The paper draws on group dynamic theory, and points out the importance of building a reflexive milieu in the group. Musical concepts are used to illustrate the communicative and creative aspects of PBL and the paper uses the analogy between improvising together and do a project work together. We also discuss the role of the supervisor in a PBL group process. Further we argue that creativity is rooted deep in our consciousness and connected to our ability to work with a flexible mind. In order to enhance the cohesion as well as the creativity of the group a model of music listening as a concrete intervention tool in PBL processes is proposed. Journal of Problem Based Learning in Higher Education, Vol 3 No 1 (2015): Special Issue: PBL and Creative Processes

Introduction: The determination of energy expenditure, considering the physical activity level and health status, is very important to adjust the individuals' nutritional supply. Energy expenditure can be determined by using indirect calorimetry, bioelectrical impedance, doubly labeled water, predictive equations, among others. All these methods have been used in clinical and research areas. However, considering the inconsistence in several research results, there is no consensus yet about the applicability of many of these methods. Objectives: The aim of this review is to describe the components of energy expenditure and the methods for its determination and estimation, summarizing their main advantages and limitations. Results and discussion: Indirect calorimetry and doubly labeled water are considered more accurate methods, but expensive. On the other hand, even though other methods present limitations, they are convenient and less expensive, and can be used with some caution.Introducción: Determinar el gasto energético (GE), considerando la actividad física y el estado de salud, es muy importante para ajustar el cálculo de la necesidad nutricional para cada individuo. Para eso, se pueden utilizar técnicas como la calorimetría indirecta, la bioimpedancia eléctrica, el agua doblemente marcada, las ecuaciones predictivas, entre otras. Estos métodos son utilizados en la práctica clínica y en estudios científicos. Sin embargo, debido a la inconsistencia de los resultados de estas investigaciones, todavía no hay un consenso respecto a su aplicabilidad. Objetivos: De esa forma, esta revisión tiene como objetivo discutir los componentes del gasto energético, así como las técnicas para su determinación y estimativa, señalando sus ventajas y limitaciones. Resultados y discusión: La calorimetría indirecta y el agua doblemente marcada son métodos considerados más acurados, sin embargo onerosos. Los otros métodos presentan limitaciones, pero por su practicidad y bajo coste, algunos de ellos pueden ser usados con cautela.

Background . In 1984, the Alaska Department of Commerce and Economic Development (DCED) issued the State's first inventory/economic assessment of wind generators, documenting installed wind generator capacity and the economics of replacing diesel-fuel-generated electricity. Alaska's wind generation capacity had grown from hundreds of installed kilowatts to over 15.3 megawatts (MW) by January 2012. Method . This article reviews data and conclusions presented in “Alaska's Wind Energy Systems; Inventory and Economic Assessment” (1). (Alaska Department of Commerce and Economic Development, S. Konkel, 1984). It provides a foundation and baseline for understanding the development of this renewable energy source. Results . Today's technologies have evolved at an astonishing pace; a typical generator in an Alaska wind farm now is likely rated at 1.5-MW capacity, compared to the single-kilowatt (kW) machines present in 1984. Installed capacity has mushroomed, illustrated by Unalakleet's 600-kW wind farm dwarfing the original three 10-kW machines included in the 1984 inventory. Kodiak Electric had three 1.5-MW turbines installed at Pillar Mountain in 2009, with three additional turbines of 4.5-MW capacity installed in 2012. Utilities now actively plan for wind generation and compete for state funding. Discussion . State of Alaska energy policy provides the context for energy project decision-making. Substantial renewable energy fund (REF) awards – $202,000,000 to date for 227 REF projects in the first 5 cycles of funding – along with numerous energy conservation programs – are now in place. Increasing investment in wind is driven by multiple factors. Stakeholders have interests both in public policy and meeting private investment objectives. Wind generator investors should consider project economics and potential impacts of energy decisions on human health. Specifically this article considers: a. changing environmental conditions in remote Alaska villages, b. impacts associated with climate change on human health, c. progress in better understanding wind energy potential through resource assessments and new tools for detailed feasibility and project planning, d. need for comprehensive monitoring and data analysis, and e. state funding requirements and opportunity costs. Conclusion . The energy policy choices ahead for Alaska will have important implications for Arctic population health, especially for those villages whose relatively small size and remote locations make energy a key component of subsistence lifestyles and community sustainability. Wind generation can contribute to meeting renewable energy goals and is a particularly important resource for rural and remote Alaskan communities currently dependent on diesel fuel for generating electricity and heat.

Five years old poplar (Populus spp.) plantation represents an interesting model of productivity. The most attractive characteristics of this energy crop are the handling flexibility, the high yield of biomass per area unit and the good quality of the chips obtainable. The mechanical harvesting of five-years old poplar plantations requires the use of specialized forest machineries such as harvester, feller, forwarder and chipper. Usually, after felling, the working phases consist of extraction, stacking and chipping. Generally, the last one is carried out in a “static phase”, where the product is taken from staked logs by using a hydraulic arm having a gripper that feed the chipping machine. In order to introduce technological innovations for medium rotation forestry harvesting, the Consiglio per la Ricerca e la sperimentazione in Agricoltura, Unità di ricerca per l’Ingegneria agraria (CRA-ING) of Monterotondo (Rome, Italy) has developed a five years poplar cut-windrower and a self-propelled chipper equipped with a pick up head. Both machines have shown good quality of the work performed and the results obtained indicates that the work phases could be simplified in order to reduce both time of use and harvesting costs. Proceedings of the 21st European Biomass Conference and Exhibition, 3-7 June 2013, Copenhagen, Denmark, pp. 125-128

Introduction: Pulsatile extracorporeal circulation may improve organ perfusion during cardiac surgery. Some minimally invasive extracorporeal circulation (MiECC) systems allow pulsatile perfusion. The present study investigated the influence of arterial tubing compliance on hemodynamic energy transfer into the patient. Methods: Aortic models with adult human geometry were perfused in a mock circulation. A MiECC system was connected using either high-compliance silicone tubing or standard kit tubing. Energy equivalent pressure (EEP) and surplus hemodynamic energy (SHE) were computed from flow and pressure data. Aortic models with physiological and sub-physiological compliance were tested to assess the influence of the pseudo-patient. Results: Non-pulsatile flow did not generate SHE. SHE during pulsatile flow in the compliant aortic model was significantly higher with kit tubing compared to silicone tubing. Maximum SHE was achieved at 1.6 L/min with kit tubing (7.7% of mean arterial pressure) and with silicone tubing (4.9%). Using the low-compliance aortic model, SHE with kit tubing reached a higher maximum of 14.2% at 1.8 L/min compared to silicone tubing (11.8% at 1.5 L/min). Conclusions: Flexible arterial tubing did not preserve more hemodynamic energy from a pulsatile pump compared to standard kit tubing in a model of adult extracorporeal circulation. The pseudo-patient’s compliance significantly affected the properties of the mock circulation. © In Copyright http://rightsstatements.org/vocab/InC/1.0/

The objective of this study was to evaluate the feasibility of an aqueous process for the biorefinery of sunflower whole plant using a twin-screw extruder. Aqueous extraction of oil was chosen as an environment-friendly alternative to the solvent extraction. The extruder was used to carry out three essential unit operations: grinding, liquid/solid extraction, and liquid/solid separation. Wringing out the mixing was effective. However, drying of the cake meal was not optimal. Lixiviation of cotyledon cells was also incomplete. Extraction efficiency depended on operating conditions: screw rotation speed, and input flow rates of whole plant and water. In the best conditions, oil yield was 57%. Residual oil content in the cake meal was 14%. These conditions leaded to the co-extraction of proteins, pectins, and hemicelluloses. The corresponding protein yield was 44%. Oil was extracted in the form of two oil-in-water emulsions. These hydrophobic phases were stabilized by phospholipids and proteins at interface. An aqueous extract containing part of the water-soluble constituents, mainly proteins and pectins, was also generated. As a mixture of fibers and proteins, the cake meal was molded by thermo-pressing. Panels produced had interesting mechanical properties in bending. The obtained fractions may have applications as bases for industrial products. Proceedings of the 18th European Biomass Conference and Exhibition, 3-7 May 2010, Lyon, France, pp. 1481-1489

Research within agricultural technology focuses mainly on increasing the efficiency of crop production. Electric powered machines have several advantages. The machine control is much easier in terms of sensor integration, active navigation and task application compared with traditional machine types. Furthermore, low machine weights and the use of renewable energy to provide the necessary energy contribute to soil protection and low emissionperformance. The aim of the paper was to describe the design, the control and the renewable energy supply for a small electric powered robot for outdoor field monitoring and other operations. Furthermore the energy consumption for the different operations scenarios was determined based on power consumption measurements for the basic navigation modes. Additionally two different charging scenarios have been investigated. The investigation has shown that it is possible to power a robot using PV cells for an operation time of 11 to 13 hours. The PV charging solutions are expensive compared with using thepublic power grid. They are only viable when there is no access to the grid.

This study aims to investigate the role of leadership in creating a sustainable and realisticadministrative organizations in Romania based on the idea that any institutional or organizational changestarts from its employees who realize that something goes wrong and report it. We used as research methodthe descriptive questionnaire of leader behavior, adapted from LBDQ (Leader Behavior DescriptionQuestionnaire) and SPSS program. The LBDQ questionnaire has 100 items and 11 dimensions, and thesample consists of 150 subjects, civil servants, average age 35, most of them having university studies,employees of the Public Service Taxes and Fees and other Local Budget Revenues in Ploiesti and Brasov.The results of the study show that, in terms of representation outside the organization, there are differencesbetween the behaviors of the two leaders, but there are also significant differences between the two groups ofsubjects in terms of employee perceptions.