• Energy Research
• Restricted close
• 7. Clean energy close
• 11. Sustainability close
• 2. Zero hunger close
• 1. No poverty close

Photoexcitation and charge carrier thermalization inside semiconductor photocatalysts are two important steps in solar fuel production. Here, photoexcitation and charge carrier thermalization in a silicon wafer are for the first time probed by a novel, yet simple and user-friendly Attenuated Total Reflectance Infrared spectroscopy (ATR-IR) system.

Nowadays, many islands worldwide are lack of electrical energy. Thus, it is convenient to exploit available renewable energy sources, among which sea waves near the islands. This paper focuses on the power conversion system coupled with an offshore wave energy device, such as an improved linear generator, to be used for sea wave energy harvesting. Particularly, the design of the linear generator has been proposed to improve the energy efficiency of the entire system. The proposed power conversion system is composed by two Boost Rectifier (BR) directly coupled to the linear generator, and one Voltage Source Inverter (VSI), which it is used as front-end between the DC-bus and the grid. The proposed converters are realized using the Silicon Carbide (SiC) devices in order to improve the efficiency. Furthermore, the control strategy to regulate the generator side and grid side currents has been implemented. The proposed system has been validated using the Hardware-In-the-Loop (HIL) test bench and 20 kW SiC power converters.

Radiation use efficiency values estimation based on the biomass increment (one approach) and on NPP from eddy covariance (two approaches) estimation of NPP brings the values of 0.13, 0.40, and 0.47 g (C) MJ −1 , respectively. The productivity of terrestrial ecosystems is primarily reliant on the absorption of solar radiation energy and its conversion into biomass. Monteith (1977) first introduced the concept of radiation use efficiency (RUE), which expresses the effectiveness of a plant stand to use solar radiation for the formation of new biomass and to maintain existing biomass. The presented paper uses a long-term, decadal, time series of biomass data, which is based on forest inventory data and an allometric relation, and on the application of eddy covariance (EC) estimation of Net Primary Production (NPP). These approaches provide different values of light use efficiency (LUE). LUE is based on direct carbon exchange estimation, LUE i , which denotes instantaneous efficiency based on the relationship between the daily sum of incident global radiation (GR i ) and NPP and LUES, calculated as the ratio between the sum of NPP and the sum of GR i per growing season. RUE is based on direct yearly biomass increment expressed in carbon units (carbon = 0.5 × biomass) divided by the sum of GR i per year. The obtained values amount to 0.13, 0.40, and 0.47 g(C) MJ−1 for RUE, LUES, and LUE i , respectively. The higher value of LUE i reflects a direct relation with the efficiency of photosynthetic carbon pumping. In contrast, the RUE value, based on biomass inventories, is the result of woody mass formation that is caused by several mutually related physiological processes and “wastages” of radiation utilization.

Microbial-based indicators of soil quality are believed to be more dynamic than those based on physical and chemical properties. Recent developments in molecular biology based techniques have led to rapid and reliable tools to characterize microbial community structures. We determined the effects of conventional and no-tillage in cropping systems with and without cover crops on bacterial community structure, total organic carbon (TOC) and soil aggregation. Tillage and rotation did not affect TOC from bulk soil. However, TOC was greater in the largest aggregate size class (7.98-19 mm), and had greater mean-weight diameter under no-tillage than under conventional tillage in the 0-5 cm soil layer. Soil bacterial community structure, based on denaturing gradient gel electrophoresis of polymerase chain reaction amplified DNA (PCR/DGGE) using two different genes as biomarkers, 16S rRNA and rpoB genes, indicated different populations in response to cultivation, tillage and depth, but not due to cover cropping. Soil bacterial community structure and meanweight diameter of soil aggregates indicated alterations in soil conditions due to tillage system. (c) 2005 Elsevier B.V. All rights reserved.

Abstract Thermal energy storage (TES) systems are growing to a relevant role in solar cooling applications. Hence, high energy density is a desirable property of the TES system. Phase change materials (PCM) helps to increase this characteristic. A high temperature pilot plant able to test different types of TES systems and materials was designed and built at the University of Lleida (Spain). This pilot plant is composed mainly of three parts: heating system, cooling system, and different storage tanks. Two identical storage tanks based on the shell-and-tubes heat exchanger, one of them including 196 squared fins in the bundle of the tubes and the other without, were experimentally tested. Hydroquinone was selected as the storage material, having a latent heat of 205 kJ/kg and a phase change temperature between 168 and 173 °C. The aim of this paper is to test experimentally, and compare the average effectiveness of the TES systems analyzed using PCM for solar cooling and refrigeration applications. It was found out that for the same tank configurations (shell-and-tubes) even changing drastically the dimensions of the tank or the number and the diameter of the tubes, the average effectiveness curve proposed in the literature fits well with the results showed here.

In recent years, the portable technology is receiving a great interest and significant improvement due to the progresses in electronic technology development and energy storage solutions. The decrease in power requirements for working energy systems, due to the increased efficiency and to the reduction in components size, opens the access to new solutions for power supplying. In particular, alternative backup systems for battery charging or replacement could be designed taking advantage of unconventional technologies. It is the case of small photovoltaic portable panels or fuel cells technology: in these solutions different sources are used to produce limited electrical powers required to keep devices on. In this paper, a thermoelectric solution for the power generation has been considered: the generator has been designed and assembled starting from a catalytic combustor. Catalytic combustion allows safe control of the processes, and the choice of a hydrocarbon fuel ensures the power availability and a fast recharge. The size of the system is set to fit a volume close to the one of AA batteries. The electrical power output obtained is close to 1 W with a cold side temperature below 40 °C. The limited values of these physical parameters allow obtaining a portable and safe device. The generator has been fully characterized in different ranges of fuel flow rates and the performances have been thoroughly analysed for processes optimization and efficiency improvement.

Two studies conducted in Guadeloupe (West Indies) and Réunion (Indian Ocean) islands were designed to investigate the benefits of producing sugarcane as an energy crop and to assess the influence of agroclimatic factors on energy efficiency, respectively. In this context, it is essential to know the low heating value of the dry above-ground biomass (LHVd, MJ/kg) and its energy yield (EY, MJ/m2) in order to select the best varieties and set up a payment method for growers. Eighteen Poaceae (sugarcane and Erianthus) cultivars were compared under wet tropical environmental conditions in Guadeloupe. Three sugarcane cultivars were studied in four contrasting environments in Réunion. The partition sampling and biomass measurement procedures were identical at both locations. Low heating value (LHV) predictions were achieved using near-infrared reflectance spectroscopy (NIRS) after specific calibration (Guadeloupe), or arithmetically after lignocellulosic compound prediction (Réunion). In both studies, LHV variability was very low and slightly dependent on the site, cultivar and above-ground biomass components (millable stalks and tops, and green and dead leaves). Considering the overall dry above-ground biomass (DAB, kg/m2), the LHVd was calculated by averaging 159 samples (mean 16.65 MJ/kg) in Guadeloupe and 315 samples (mean 16.45 MJ/kg) for Réunion. An excellent linear relationship between the DAB and its EY, regardless of cultivar, age and environment, was found (n = 474 and R² = 0.99). Sugarcane energy content assessment could thus be simplified by measuring the DAB, while enabling development of a faster method of payment for growers based on the DAB measurement and the correlation between DAB and EY. Finally, the findings of this study should allow growers to rapidly determine the commercial value of their sugarcane crops, and also enable purchasers to assess the amount of recoverable energy. (Résumé d'auteur)

Abstract Orange Peel Waste (OPW) is a widely produced residue whose management is complicated by its physical and chemical properties. Anaerobic digestion (AD), which is commonly used for the treatment and exploitation of many biodegradable wastes, is inefficient on OPW due to the presence of essential oils (mainly d -Limonene) as well as the low pH, which cause the process to be unstable. Here we explore the effect of alkaline pre-treatment of OPW and of the addition of granular activated carbon (GAC) and Zero Valent Iron (ZVI) in improving AD in two semi-continuous reactors at a laboratory scale. The addition and pre-treatment of ZVI/GAC were shown to help process stability up to a loading of 3 kgVS·m−3·d−1 and to increase methane production even at a sub-optimal pH. The investigation of the bacterial community, by high-throughput sequencing, has also increased our insight on their involvement in AD in the presence of ZVI, including its biotic oxidation. In addition, direct interspecies electron transfer was shown to play a role in the reactor supplemented with ZVI.