• Energy Research
• Open Access close
• Closed Access close
• Embargo close
• 6. Clean water close

This data set provides detailed numerical data on the Life Cycle Inventory (LCI) analysis for assessing and comparing the environmental impact related to the treatment of sewage sludge (SS) in open windrow facilities for the production of compost and in an anaerobic digester for the production of biogas. The collection of the data is included in eleven tables, in which the machinery and duration for biogas and compost production procedures, as well as comparative data regarding the environmental impact category emissions for both scenarios are shown . Furthermore, electricity consumption and embodied energy for each scenario compared to other studies are given. The system boundary conditions were determined with the use of the Gabi software.

This dataset contains time series of reservoir releases (including any spills), evaporation loss, and rule curves for the Pong and Bhakra reservoirs, India. {"references": ["https://doi.org/10.3390/w11071413", "https://doi.org/10.1016/j.scitotenv.2019.06.021"]}

All temperature measurements in well T96-012 from September 1996 to December 2011. Data presented in this spreadsheet were digitized from temperature-time graphs presented in AMEC, Environmental and Infrastructure (2012) and Water Management Consultants, Inc. (2001) (references below) by Joseph Batir. The exact date of temperature data collection was not completely apparent and digitization may have introduced minor date errors, so instead all temperature measurements are associated with the month data collection occurred. The digitized date of temperature collection is included, but should be used with caution. The second tab includes all temperature data plotted as temperature versus depth plots. Raw data sources: AMEC Environment and Infrastructure. (2012) Long-Term Permafrost and Groundwater Monitoring Program for the Tailing Impoundment Five-Year Permafrost and Groundwater Data Analysis 2007-2011, 479 pp. Water Management Consultants, Inc. (2001) Red Dog Mine Long-Term Permafrost and Groundwater Monitoring Plan for the Tailing Impoundment, 24 pp.

The data contains vulnerability estimates (climate niche factor analysis) for 49 native fish species in the upper Danube River basin. The upper Danube River basin is mainly located in Germany and Austria. The time frame covered is 300 years from 1800 to 2100 including two Representative Concentration Pathways, RCP 4.5 and RCP 8.5. Vulnerability estimates are calculated for three time frames (1800-1830; 1900-1930and 2070-2100 (including two RCPs)) with the time frame 1970-2000 as the baseline. In all files the zone column gives the basin ID for the master basins layer. The mean column gives the mean vulnerability estimate for a sub-basin for a certain species. For the future scenarios the different predictions based on the different GCM-RCM combinations have to be combined using the median and the zone as unique identifier.

Siderophores are low molecular weight secondary metabolites produced by microorganisms under low iron stress as a specific iron chelator. In the present study, a rhizospheric bacterium was isolated from the rhizosphere of sesame plants from Salem district, Tamil Nadu, India and later identified as Bacillus subtilis LSBS2. It exhibited multiple plant-growth-promoting (PGP) traits such as hydrogen cyanide (HCN), ammonia, and indole acetic acid (IAA), and solubilized phosphate. The chrome azurol sulphonate (CAS) agar plate assay was used to screen the siderophore production of LSBS2 and quantitatively the isolate produced 296 mg/L of siderophores in succinic acid medium. Further characterization of the siderophore revealed that the isolate produced catecholate siderophore bacillibactin. A pot culture experiment was used to explore the effect of LSBS2 and its siderophore in promoting iron absorption and plant growth of Sesamum indicum L. Data from the present study revealed that the multifarious Bacillus sp. LSBS2 could be exploited as a potential bioinoculant for growth and yield improvement in S. indicum.

Torrefaction is considered as a method for producing biofuels with improved characteristics compared to those of the “raw” biomass (higher calorific value, moisture resistance, better grindability). The torrefaction process is an endothermic process that is usually carried out in a gaseous atmosphere in the absence of oxygen. To reduce the required heat input, it is proposed to employ the oxidative torrefaction and conduct the process in a fluidized bed agitated with flue gases containing less than 6% oxygen. Preliminary studies of the oxidative torrefaction of sunflower husks, including thermogravimetric analysis of the treated material, have shown that the heat treatment time for the biomass should be at least 5 min. A fluidized bed is a reactor with ideal mixing of the treated material where uniform treatment of raw material particles cannot generally be attained. To overcome this disadvantage of the fluidization technique and achieve the required residence time for biomass in a fluidized bed during a continuous torrefaction process, it was proposed to equip a torrefaction reactor with a series of vertical baffles spaced at 50 mm. These baffles induce a loop-like flow of the processed biomass from the inlet to the outlet of the reactor. To investigate the residence time for husk particles in the reactor, a tracer, which was colored to husk particles' color with a water-soluble dye which did not change the weight and size of the particles, was injected into the bed of uncolored particles. Tracer samples were taken every 30 s at the outlet of the reactor and were analyzed using a special procedure to determine the fraction of colored particles in each sample. This enabled us to gauge the time during which the colored particles injected into the fluidized bed reached the point of their discharge from the bed. Studies performed in a “cold” model of the reactor showed that a series of vertical baffles in the bed can provide the required residence time for biomass in a reactor including commercial reactors. Plates can provide the necessary biomass residence time in the reactor.

Oil palm empty fruit bunches (EFB) were pretreated by aqueous ammonia soaking for ethanol production. Pretreated EFB, which were pretreated at the optimal conditions of 60 °C, 12 h, and 21% (w/w) aqueous ammonia, showed 19.5% and 41.4% glucose yields during an enzymatic digestibility test for 96 h when using 15 and 60 FPU of cellulase, respectively. Using the pretreated EFB, simultaneous saccharification and fermentation for 168 h with 5% (w/v) glucan loading and 60 FPU of cellulase and 30 CBU of β-glucosidase per gram glucan resulted in ethanol production of 18.6 g/L titer, 65.6% of theoretical maximum yield, and 0.11 g/L/h of productivity.

Abstract In this study, crude cellulose derived from cornstalk, after bleaching, was used as raw material for the synthesis of sodium carboxymethyl cellulose (CMC) by reacting with the cellulose with NaOH and chloroacetic acid at 75 °C for 1.5 h. Effects of alkali dosage, concentration of chloroacetic acid on the physical and chemical properties of the CMC products were investigated. It was revealed that the reactants alkali reagent/chloroacetic acid/cellulose at the molar ratio of 4.6:2.8:1and 4:2.5:1, or at the molar ratio of NaOH/ClCH 2 COOH ≈1.6–1.64, resulted in CMC products of relatively high water solubility. The viscosity-average molecular weight M v of these two CMC products obtained at molar ratios of 4.0:2.5:1 and 4.6:2.8:1 is in the range of 1.94 × 10 4 –2.48 × 10 4 g mol −1 , and the average DS of the two products are 0.57 and 0.85, respectively. As the solute concentration is above 2 wt%, the viscosity of the CMC-water solution exhibits nonlinear (exponential) increasing with increasing the solute concentration (typical of non-Newton fluids).