• Energy Research
• 6. Clean water close
• 12. Responsible consumption close
• Persian close

This study was carried out to evaluate the effects of drought stress on 12 genotypes of vetch (Vicia dasycarpa) at the experimental field of Agriculture and Natural Resources Center of East Azarbaijan Province during 2003. Field trial was conducted as a spilt plot design based on randomized complete blocks with three replications. Drought treatments (normal, medium and severe stress conditions) were included in main plots and the genotypes were allocated in subplots. During the growing season, plant height, pod length, pod width, number of grains per pod, 1000 grain weight, number of pods per plant, number of grains per plant, number of axillary branches, harvest index, biomass and grain yield were measured. Drought stress effected all traits (except number of grains per pod) significantly. Greatest amount of reduction in value due to water stress belonged to grain yield and biomass. Number of pods per plant and number of grains per plant were affected by drought more than other yield components. However, the adverse effect of water stress was not similar for all genotypes and there were significant genotype by environment interaction for important characters such as biomass, grain yield, number of pods per plant, number of grains per plant and plant height. Evaluation of the genotypes based on drought tolerance indices (STI and TOL) indicated that under medium water stress environment the genotypes 9 (from Italy) and 7 (from Turkey) showed better drought tolerance performance in terms of grain yield. Regarding biomass, the genotypes 3 (from Italy) and 6 (from Australia) were recognized as the most appropriate genotypes for hoth medium and severe drought stress conditions.

Introduction: Water when harvested is commonly stored in dams, but approximately up to half of it may be lost due to evaporation leading to a huge waste of our resources. Estimating evaporation from lakes and reservoirs is not a simple task as there are a number of factors that can affect the evaporation rate, notably the climate and physiography of the water body and its surroundings. Several methods are currently used to predict evaporation from meteorological data in open water reservoirs. Based on the accuracy and simplicity of the application, each of these methods has advantages and disadvantages. Although evaporation pan method is well known to have significant uncertainties both in magnitude and timing, it is extensively used in Iran because of its simplicity. Evaporation pan provides a measurement of the combined effect of temperature, humidity, wind speed and solar radiation on the evaporation. However, they may not be adequate for the reservoir operations/development and water accounting strategies for managing drinking water in arid and semi-arid conditions which require accurate evaporation estimates. However, there has not been a consensus on which methods were better to employ due to the lack of important long-term measured data such as temperature profile, radiation and heat fluxes in most lakes and reservoirs in Iran. Consequently, we initiated this research to find the best cost−effective evaporation method with possibly fewer data requirements in our study area, i.e. the Doosti dam reservoir which is located in a semi-arid region of Iran. Materials and Methods: Our study site was the Doosti dam reservoir located between Iran and Turkmenistan borders, which was constructed by the Ministry of Water and Land Reclamation of the Republic of Turkmenistan and the Khorasan Razavi Regional Water Board of the Islamic Republic of Iran. Meteorological data including maximum and minimum air temperature and evaporation from class A pan were acquired from the Doosti Dam weather station. Relative humidity, wind speed, atmospheric pressure and precipitation were acquired from the Pol−Khatoon weather station. Dew point temperature and sunshine data were collected from the Sarakhs weather station. Lake area was estimated from hypsometric curve in relation to lake level data. Temperature measurements were often performed in 16−day periods or biweekly from September 2011 to September 2012. Temperature profile of the lake (required for lake evaporation estimation) was measured at different points of the reservoir using a portable multi−meter. The eighteen existing methods were compared and ranked based on Bowen ratio energy balance method (BREB). Results and Discussion: The estimated annual evaporation values by all of the applied methods in this study, ranged from 21 to 113mcm (million cubic meters). BREB annual evaporation obtained value was equal to 69.86mcm and evaporation rate averaged 5.47mm d-1 during the study period. According to the results, there is a relatively large difference between the obtained evaporation values from the adopted methods. The sensitivity analysis of evaporation methods for some input parameters indicated that the Hamon method (Eq. 16) was the most sensitive to the input parameters followed by the Brutsaert−Stricker and BREB, and radiation−temperature methods (Makkink, Jensen−Haise and Stephen−Stewart) had the least sensitivity to input data. Besides, the air temperature, solar radiation (sunshine data), water surface temperature and wind speed data had the most effect on lake evaporation estimations, respectively. Finally, all evaporation estimation methods in this study have been ranked based on RMSD values. On a daily basis, the Jensen−Haise and the Makkink (solar radiation, temperature group), Penman (Combination group) and Hamon (temperature, day length group) methods had a relatively reasonable performance. As the results on a monthly scale, the Jensen−Haise and Makkink produced the most accurate evaporation estimations even by the limited measurements of the input data. Conclusion: This study was carried out with the objective of estimating evaporation from the Doosti dam reservoir, and comparison and evaluation of conventional method to find the most accurate method(s) for limited data conditions. These examinations recognized the Jensen−Haise, Makkink, Hamon (Eq. 17), Penman and deBruin methods as the most consistent methods with the monthly rate of BREB evaporation estimates. The results showed that radiation−temperature methods (Jensen−Haise and Makkink) have appropriate accuracy especially on a monthly basis. Also deBruin, Penman (combination group), Hamon and Papadakis (temperature group) methods produced relatively accurate results. The results revealed that it is necessary to calibrate and adjust some evaporation estimation methods for the Doosti dam reservoir. According to the required input data, sensitivity and accuracy of these methods, it can be concluded that Jensen−Haise and Makkink were the most appropriate methods for estimating the lake evaporation in this region especially when measured data were not available.

Background and aims: Fossil fuels Emission and their limited resources make to use renewable energy with more sustainable energy sources and less minimal environmental impacts. One of the most appropriate renewable energies considered lots of advantages including being renewable and environmentally friendly and containing social and economical interests, is Biomass. “Biomass” means a power source that is comprised of, but not limited to, combustible residues or gases from forest products manufacturing, waste, byproducts, or products from agricultural and orchard crops, waste or co-products products from livestock and poultry operations, waste or byproducts from and food processing, urban wood waste, municipal solid waste, municipal liquid waste treatment operations, and landfill gas. Due to the wide availability of biomass worldwide, mainly because it can be obtained as a by-product of many industrial and agricultural processes, biomass represents a growing renewable energy source with high growth potential. Biomass helps reduce the amount of GHG that give more impact to global warming and climate change. The biomass emissions level is far smaller compared to fossil fuels. The basic difference between biomass and fossil fuels when it comes to amount of carbon emissions is: all the CO2 which has been absorbed by plant for its growth is going back in the atmosphere during its burning for the production of biomass energy. While the CO2 produced from fossil fuels is going to atmosphere where it increases greenhouse effect. Another great advantage of biomass energy is that it is an indigenous fuel. The fuels from biomass materials can be produced locally and no high technology is required. Producing fuel from biomass materials reduces the dependence of a country on foreign resources for their fuel requirements. Moreover, since this indigenous fuel is labor intensive, it can contribute to the generation of new jobs, particularly in rural and farming communities. The number of employed workers required is 3-6 times greater than the fossil energy production in the associated processes. This study was aimed to identification and green grading of environmental management in that’s jobs. Some other socio-economic benefits can be counted such as slowing down the migration from the rural areas to cities, decreasing the issues associated with rapid urbanization, and developing a biodiesel production industry. Among its great benefits is the forest use of the territory, which would also serve to clean the forest and thus prevent forest fires, and the ability to generate jobs. Biomass generates continuous employment such as the extraction of raw materials from the countryside and the bush. This study was aimed to identification and green grading of environmental management in that’s jobs. The research questions are: 1. What are green job indicators? and 2. has renewable energy biomass business indicators of green jobs? Methods: This study was qualitative – quantitative, first according to the grounded theory qualitative method semi-deep interviewed with 50 environmental experts in the Environmental Protection Agency, the municipality, faculty members of the universities, the natural resources and watershed management, agriculture ministry and NGOs active in the environment conducted a with purposeful sampling (snowball). Regarding qualitative data validation were used constant data comparison, reviewing the observers and handwriting by participants and use of foreign and expert researchers familiar with qualitative research as an observer. Then, data was analyzed using the grounded theory of open, axial and selective coding analyzed in MAXQDA software. Once coding categories emerge, the next step is to link them together in theoretical models around a central category that hold everything together. In order to explain the grounded theory, green jobs are considered as the central variable, and the main line of research is defined using reminders and diagrams around it, and finally the green indicators derived from it are developed. Based on them, researcher-made questionnaire was designed in a combination, closed response with 5-rate likert scale. In order to determine the validity of the questionnaire, the content validity was used with the lawshe model and with reviewing previous studies was determined, the scope of the questionnaire in greenness of the job, and the reliability of the questionnaire was obtained using Cronbachchr('39')s alpha coefficient for internal consistency. Cronbachchr('39')s alpha value for each research question was more than 0.7, the reliability of the questionnaire was approved. Also, the Cronbachchr('39')s alpha coefficient of the questionnaire was 0.890. In order to estimate the repeatability, the retest method and the ICC index were used that index was 0.996 (p <0.001), indicating its high repeatability. For estimating the results of greenness and its degree in the jobs of renewable energy biomass, were used statistical analysis of Kolmogrov-Smirnov test, single-sample t-test and Friedman test in SPSS software. Result: Findings of the qualitative research on the structure of green job identification and prioritization were discussed in six categories including establishment in accordance with the legal and technological infrastructure of the green job as context, green job as a phenomenon, environmental pollution elimination and the health risks reduction of the community as causal conditions, green management as operational strategies, environmental empowerment of jobs as an intermediary conditions and economic and environmental benefits as a consequence. The results of quantitative to showed that jobs studied are considered green jobs and their green grading are as follows: 1. Maintenance (mean=5/61), 2. System Design (mean=4/83), 3. Training (mean=4/22), 4. Quality Monitoring and Quality (mean=4/03), 5. Collection (mean=3/64), 6. Manufacturer (mean=3/61) and 7. Worker and System Administrator (mean=2/06). According to the results, components of green jobs are defined including: (1. explaining Green Jobs, Productivity of Occupations, 2. environmental Protection and Health, 3. Green potentials and incentives, 4. environmental Standards and Indices of Health and Green Management, 5. environmental and health challenges and solving energy crisis with the help of green jobs, 6. environmental education and green culture, 7.environmental empowerment through a variety of environmental and health education, informing and accompanying NGOs, 8. economic-ecological profitability and the optimistic approach to economic interests (green economy) and impact of economic issues, profitability, financial support, market regulation, and return on investment in the process of greening and green expanding businesses). Results show that green indices of occupations are 1- environmental and health of profile occupational, 2- strengths and weaknesses, threats and opportunities green jobs, 3- green supply chain management of businesses, 4- impact of green jobs on sustainable development and community health, 5- effect of environmental education on the green performance of occupations, the impact of environmental advertising on green performance and 6- reduce employee costs and increase business profits through environmental management. These green jobs literature extols the virtues of generating energy using “wood waste and other byproducts, including agricultural byproducts, ethanol, paper pellets, used railroad ties, sludge wood, solid byproducts, and old utility poles. Several waste products are also used in biomass, including landfill gas, digester gas, municipal solid waste, and methane. Conclusion: The green features of the biomass business are included solving the problem of fossil fuels, caused by fossil energy and renewable energy sources. identification and green grading jobs diversifying energy sources, sustainable development, securing energy, removing environmental and health problems would help to managers and policy makers for identifying and providing executive solutions and identifying multifaceted priorities for green management. Despite the high potential of bio-economy in renewable energy (biomass) and high amounts of raw materials in the agricultural waste and sewage has not been fully realized. To achieve of developing a competitive economy, low-carbon resources with efficient resources, global economic markets have shifted strategy towards renewable energies, so as to create green jobs in order to reduce environmental problems (waste and climate change). For performance of macroeconomic policy in notification Supreme Leader on the restructuring of the countrychr('39')s economic structure has proposed policies to change reducing dependencies on fossil fuels and external resources towards the creation and development of green jobs in the field of renewable energy, especially biomass, because there are a lot of raw materials in the country, especially in the villages and without necessary to high technologies. Biomass development increase energy efficiency, the use of renewable energy resources and the creation of a favourable environment for investment in energy efficiency measures and the generation of ‘green’ jobs. The rural development prospects for green job growth are mixed. Rural areas contain biomass feedstocks which will be increasingly relied upon to offset fossil fuel dependencies. The distribution of those feedstocks, however, is not uniform across rural areas. Furthermore, the technologies to convert those feedstocks into fuels and other uses are yet to be demonstrated at commercially successful scales. Both policy development and research activities should be focused on the efficient utilization of rural natural resources, human capital, and rural infrastructure in achieving national green policies. The green economy appears to be fertile ground for unbiased, academic research to examine some of the regional consequences of green jobs growth and green jobs policies, to include an examination of rural opportunities, but going well beyond that dimension to include the integration of statewide and multi-state regional development opportunities as well as consequences. This study was not about raw materials (waste and sewage) to produce renewable energy biomass, and it is possible that this section may also be effective in the creation and development of green jobs, then there may be restrictions on the generalized findings, interpretations, and attributes of the causation of variables. Therefore, it is suggested that future research into this part of the process of producing renewable energy biomass should be considered.

Background and Objectives: Given that no comprehensive studies have yet been conducted on treatment of infectious wastes in hospitals of Qom City, this research was performed with the purpose of investigating the treatment methods used in these hospitals and monitoring the performance of waste elimination devices. Methods: Required information was obtained through in-person visit and observing the current situation, and the variables affecting waste treatment were extracted based on the type of treatment systems, and were collected, and accordingly, biological monitoring tests were designed for the studied hospitals. The data were analyzed using Fisher's exact test. Results: In this study, from 9 active hospitals in Qom Province, only 3 hospitals were equipped with waste treatment system. In hospital A, growth of Bacillus stearothermophilus spore were observed in 6.25% of the samples, while no microbial growth was recorded in hospital B. The initial investment to buy the machine in hospital A was about four times than that of hospital B. Conclusion: The findings of this study showed that treatment device of hospital B is more appropriate compared to the devices of hospital A due to complete destruction of spores, lower cost (for purchase), and maintenance. .

Introduction: Identifying the effect of energy consumption, economic growth and foreign trade on CO2 emissions have been studied at both national and international levels. However, there have been very few researches on the effect of financial and banking development on the CO2 emissions, especially in Iran. So, this study aimed to cover this research gap. Methods: This study was a time-series analyses over the period of 1971-2011. In order to investigate about existence of a long-run co-integration relationship between CO2 emissions and banking development indicators in Iran, long-run coefficients were estimated by Autoregressive Distributed Lag (ARDL) and Dynamic Ordinary Least Squares (DOLS) approaches. Moreover, to carry out the econometric tests Microfit (5.0) and Eviews (9.0) software were used. Results: Findings showed that the ratio of domestic credit to private sector by banks to GDP (Banking Development Indicator) reduces CO2 emissions in Iran. In addition, results confirm with theories and other empirical studies showed that energy consumption has positive and significant effect on CO2 emissions in long-run. Conclusion: The government can help to improve environment quality by establishing a strong policy making on credit to firms by banking system. Because in this framework firms to receive credit from banking system are required codified programs to reduce negative outcomes of energy consumption and this lead to a less CO2 emissions in long-run.

Soil compaction, as one of the causes of stress, has a negative impact on plant growth. The aim of this study was to evaluate the effect of soil compaction on root system of Caucasian alder (Aluns subcotdata C. A. Mey.) seedlings in controlled condition. After sowing of alder seeds in plastic pots in loamy or clay-loamy soils with constant moisture regimes, the reaction of seeds were evaluated under six levels of soil compaction. Collar diameter, length, biomass, and allocation ratio of root system were measured and calculated. According to the results, the studied parameters decreased significantly by increasing soil bulk density and their trend were downward quadratic, except ratio of lateral root length to main root length. Thirty six percent decrease in the mean of lateral root length, 31% decrease in the mean of main root length, 37% reduction in the mean diameter of main root and 27% fell down in the mean value of root dry biomass was recorded in treatments with different levels of soil compaction in compare to the control treatment. In general, results indicate that compaction tension has negative effect on the characteristics in the root system of Caucasian alder seedlings.

The evaluation of climate change impact on hydrological cycle includes uncertainty. This study aimed to evaluate the uncertainty of climate change impact on the Zayandeh-Rud Reservoir inflow during the future period of 2020-2049. The outputs of 22 GCM models were used under the three emission scenarios including RCP2.6, RCP4.5 and RCP8.5. The Bayesian Model Averaging (BMA) was used as the uncertainty analysis for weighting the 22 GCM models based on their ability to simulate the baseline 1990-2005 period. Results showed that different GCM models had different abilities in estimating climatic and hydrological variables and the application of uncertainty analysis in climate change studies could be necessary. The monthly temperature in the upstream of Zayandeh-Rud reservoir could be raised by 0.85 to 1 ◦C; also, the precipitation might be increased by 2 to 3 percent. The high flow during winter season will increase under climate change, while the spring and autumn seasons’ low flows are expected to reduce. Additionally, the annual reservoir inflow may decrease by 1 to 8 percent, showing the necessity for change in Zayandeh-Rud reservoir’s rule curve and allocation of water resources.

Background and Aim: Among the medical wastes, dental wastes have a high diversity and due to its high contents of hazardous, toxic, and pathogenic agents, therefore these wastes are of great importance. The aim of this study was to investigate and analyze the amount of waste produced in dentistry offices in Birjand. Materials and Methods: In this descriptive cross-sectional study, 48 dental offices in the city of Birjand were studied. Sampling was carried out by environmental health experts in three consecutive working days (Monday, Tuesday, and Wednesday) from every center. The Samples were divided into 5 categories such as semi-domestic, infectious, chemical-pharmaceutical, toxic and sharp material, Separated and weighed using a laboratory scale. Information was expressed as percentage by weight. Results: Based on the results, the total amount of waste produced in dental offices in Birjand was 7848.02 kg / year. percentages of semi-domestic, infectious, chemical-pharmaceutical, sharp material, and toxic wastes were 54.3%, 29.7%, 11.8%, 3.9% and 0.11% respectively. Conclusion: Considering the high volume of dental waste, especially infectious and hazardous materials, the need for separation and recycling in the office is evident. It is necessary to manage the wastes and their separation and recycling in source place.

The energy management of ships to improve the efficiency of ships and reduce greenhouse gas emissions is among the most important issues that have been considered as a milestone in designing and constructing of vessels in recent years. The study of energy trends and attention to technological changes and the importance of more stringent environmental standards in recent years have led to a major challenge in relation to air pollution, energy management, and exposure to end-of-life sources of fossil fuels. In recent years, focus on current fuels and technologies in vehicles has led to a major challenge regarding air pollution, greenhouse gas emissions, energy security, and also exposure to exhausting sources of fossil fuels. Now days, Hybrid propulsion systems are one of the solutions that are being followed in many countries to solve this problem. In this paper, after introducing the hybrid system; conceptual design and determination of a suitable hybrid system for vessels have been investigated. Then the calculations and relations dominating the hybrid parallel system of vessel are presented. The modeling is also done using the ADVISOR software run in the Simulink platform of the MATLAB for both conventional and hybrid systems. The results show that parallel hybrid vessel has improved by 7% in total efficiency and 7.1% for consumption. In addition, HC and CO emissions have been decreased by 0.44% and 0.39%, respectively.

Introduction Soil bacteria plays an important role in bio-geochemical cycles that cause soil ecosystem dynamics to return nutrients to life cycles. In recent days, these organisms can serve as complementary or, in some cases, alternative fertilizers, to maintain the sustainability of the agricultural ecosystem. On the other hand, the production of high-yielding cultivars has increased the consumption of agricultural inputs, especially fertilizers, which has caused a crisis of environmental pollution. Bacteria are soil microorganisms that are involved in the nutrient cycle of the soil, can improve plant growth, and are known as growth promoting bacteria (PGPRs). Approximately two to five percent of root-borne bacteria are in the group of growth-promoting bacteria. These bacteria improve plant growth in a variety of ways, including nitrogen fixation, synthesis and production of iron-complex ingsiderophore, production of plant hormones, production of antibiotics and fungicide compounds. Soil has a wide range of organic phosphate sources that must be converted to its inorganic form by enzymes such as phosphatase, phytase and phosphonostat, and bacteria in the Bacillus and Pseudomonas groups can be produced by the production of acid phosphatases that dissolve phosphates to help absorb them by plant. Another group of bacteria such as Azotobacter and Azospirillum have the ability to stabilize nitrogen. Sesame (Sesamum indicum L.) is one of the oldest oilseed plants and has been named as the queen of oilseed plants and compatible with arid and semi-arid regions. Lowing sesame yield per unit area necessity to exerted agronomic management practice. The number of capsules is the main components of yield that has highly correlated with it. The aim of this study was to investigate the effect of biofertilizers on number of capsules per node of leaves sesame plant under field conditions. Materials and Methods An experiment was conducted as factorial arrangement based on a randomized complete block design with three replications at Mashhad Agricultural and Natural Resources Research and Education Center during two growing seasons (2017-2018 and 2018-2019). The first factors were: seeds single capsule and multi-capsule seed types and second factors were four Biofertilizers: 1) Nitroxin® (containing Azotobacter and Azospirillum bacteria), 2) Biophosphorus® (containing phosphatase-solubilizing bacteria of genus Bacillus and Pseudomonas), 3) Equal mixture of Nitroxin and biophosphorus and 4) control. At planting time, seeds were inoculated with biological fertilizers by standard method, away from direct light and foliar spraying was done in 50% reproductive stage with the bio fertilizer treatments. The morphological traits (plant height, number and length of lateral branches, number and dry weight of leaves, number of nodes, number of capsules, number of single and multiple capsules nodes were measure per plant and biomass and seed yield were measured per unit area. Data was analyzed using MSTAT-C and means was comparison with LSR at the 5% probability level. Results and Discussion Application of biofertilizers increased plant height by 11 to 19.9 cm compared to no fertilizer treatment (89.1 cm). In the second year, the number of nodes was about 43% higher than the first year. Triple interaction treatments showed that in the second year and in single capsule seeds the application of nitroxin and biophosphorus fertilizer had the highest number of nodes (85.7) and the lowest amount of it was observed in single seed capsule plants in the first year. The highest number of single capsule nodes was obtain in the application of biofertilizer (nitroxin+ biophosphorus) in single capsule seeds. In the second year, the number of single capsule nodes in both seed types was more than 29 per plant. In the second year, the highest number of multi-capsule nodes was recorded from multi-capsule seeds with use of nitroxin and biophosphorus combination fertilizers. Interaction between treatments of seed type and biofertilizer results showed that plant was growth from multi-capsule seed had a positive reaction to biofertilizer so that in multiple seed type the number of capsule per plant was more than 57 in application of biofertilizer. Both in the first and second year, in the multiple seed capsule type, the use of biofertilizers produced more grain yield per square meter than other treatments. Conclusions The results of this study showed that consuming of biofertilizers together that containing Azotobacter, Azospirillum, Bacillus and Pseudomonas had a positive significant effect on the plant height, number of capsules per node leaf, biomass and number of capsule that lead to increase of seed yield in sesame plant. Therefore, it is recommended that seeds inoculate with these bacteria in sowing time and applying one foliar spraying in mid-flowering time lead to enhance sesame yield.