• Energy Research
• 12. Responsible consumption close

Torrefaction is considered as a method for producing biofuels with improved characteristics compared to those of the “raw” biomass (higher calorific value, moisture resistance, better grindability). The torrefaction process is an endothermic process that is usually carried out in a gaseous atmosphere in the absence of oxygen. To reduce the required heat input, it is proposed to employ the oxidative torrefaction and conduct the process in a fluidized bed agitated with flue gases containing less than 6% oxygen. Preliminary studies of the oxidative torrefaction of sunflower husks, including thermogravimetric analysis of the treated material, have shown that the heat treatment time for the biomass should be at least 5 min. A fluidized bed is a reactor with ideal mixing of the treated material where uniform treatment of raw material particles cannot generally be attained. To overcome this disadvantage of the fluidization technique and achieve the required residence time for biomass in a fluidized bed during a continuous torrefaction process, it was proposed to equip a torrefaction reactor with a series of vertical baffles spaced at 50 mm. These baffles induce a loop-like flow of the processed biomass from the inlet to the outlet of the reactor. To investigate the residence time for husk particles in the reactor, a tracer, which was colored to husk particles' color with a water-soluble dye which did not change the weight and size of the particles, was injected into the bed of uncolored particles. Tracer samples were taken every 30 s at the outlet of the reactor and were analyzed using a special procedure to determine the fraction of colored particles in each sample. This enabled us to gauge the time during which the colored particles injected into the fluidized bed reached the point of their discharge from the bed. Studies performed in a “cold” model of the reactor showed that a series of vertical baffles in the bed can provide the required residence time for biomass in a reactor including commercial reactors. Plates can provide the necessary biomass residence time in the reactor.

Second-generation bioethanol can be produced from various lignocellulosic biomasses such as wood, agricultural or forest residues. Lignocellulosic biomass is inexpensive, renewable and abundant source for bioethanol production. The conversion of lignocellulosic biomass to bioethanol could be a promising technology though the process has several challenges and limitations such as biomass transport and handling, and efficient pretreatment methods for total delignification of lignocellulosics. Proper pretreatment methods can increase concentrations of fermentable sugars after enzymatic saccharification, thereby improving the efficiency of the whole process. Conversion of glucose as well as xylose to bioethanol needs some new fermentation technologies to make the whole process inexpensive. The main goal of pretreatment is to increase the digestibility of maximum available sugars. Each pretreatment process has a specific effect on the cellulose, hemicellulose and lignin fraction; thus, different pretreatment methods and conditions should be chosen according to the process configuration selected for the subsequent hydrolysis and fermentation steps. The cost of ethanol production from lignocellulosic biomass in current technologies is relatively high. Additionally, low yield still remains as one of the main challenges. This paper reviews the various technologies for maximum conversion of cellulose and hemicelluloses fraction to ethanol, and it point outs several key properties that should be targeted for low cost and maximum yield.

The main objective of this comparative study is to understand and analyse the sustainability perspectives of museums in France, Canada, Sweden, Turkey and Greece. By adopting a qualitative research approach, data were gathered from eleven museum officials in five different countries. As an interesting result of the study, an advanced use of technology was seen at the oldest museum of the research sample. Overall, the comparative analysis revealed that general sustainability efforts, use of technology in presenting cultural heritage and active participation of visitors to the museum activities need to be improved and paid more attention at some of the museums. The increase in the number of museum activities contributes to the understanding of how cultural heritage can be sustained. The study sheds a light on the inside of changing museology and offers suggestions to the researchers in this field.

Climate change, environmental degradation, and limited resources are motivations for sustainable forest management. Forests, the most abundant renewable resource on earth, used to make a wide variety of forest-based products for human consumption. To provide a scientific measure of a product’s sustainability and environmental performance, the life cycle assessment (LCA) method is used. This article provides a comprehensive review of environmental performances of forest-based products including traditional building products, emerging (mass-timber) building products and nanomaterials using attributional LCA. Across the supply chain, the product manufacturing life-cycle stage tends to have the largest environmental impacts. However, forest management activities and logistics tend to have the greatest economic impact. In addition, environmental trade-offs exist when regulating emissions as indicated by the latest traditional wood building product LCAs. Interpretation of these LCA results can guide new product development using biomaterials, future (mass) building systems and policy-making on mitigating climate change. Key challenges include handling of uncertainties in the supply chain and complex interactions of environment, material conversion, resource use for product production and quantifying the emissions released.

Within design of information and communication technology (ICT) we need to first shape and then follow a vision to take responsibility for the futures that design materializes. Although research and literature on both sustainable technology and sustainable interaction design grow significantly, both fields with their (im)material character, are less often thought together and seen as mutually shaping. Hence, this paper examines the state-of-the-art in modularity as one sustainable design principle for the mobile phone and related ICT, utilizing a review of design (concept) cases in form of their multimedia representations. Matching the findings from the concrete exemplars with generic scientific research results within modular designing informs a discussion on value preservation (promotion of reuse over recycling and the like), portraying nowadays insufficiencies on the one hand and desirable, meaningful futures on the other. It describes both the employment of and the confidence in modularity for accomplishing sustainability, digital materiality or the soft matter, and the demandingness of modularly upgradable architectures. Supposedly by help of the critical design practice in an academic context - which translates to fundamental creativity-based research driven by envisioning new possibilities - further research shall build on the insights gained here. Our vision may thus be called sustainable technology and interaction design, which as an acronym gives STaID.

Sustainable agriculture is the backbone of food security systems and a driver of human well-being in global economic development (Sustainable Development Goal SDG 3). With the increase in world population and the effects of climate change due to the industrialization of economies, food security systems are under pressure to sustain communities. This situation calls for the implementation of innovative solutions to increase and sustain efficacy from farm to table. Agricultural social networks (ASNs) are central in agriculture value chain (AVC) management and sustainability and consist of a complex network inclusive of interdependent actors such as farmers, distributors, processors, and retailers. Hence, social network structures (SNSs) and practices are a means to contextualize user scenarios in agricultural value chain digitalization and digital solutions development. Therefore, this research aimed to unearth the roles of agricultural social networks in AVC digitalization, enabling an inclusive digital economy. We conducted automated literature content analysis followed by the application of case studies to develop a conceptual framework for the digitalization of the AVC toward an inclusive digital economy. Furthermore, we propose a transdisciplinary framework that guides the digitalization systematization of the AVC, while articulating resilience principles that aim to attain sustainability. The outcomes of this study offer software developers, agricultural stakeholders, and policymakers a platform to gain an understanding of technological infrastructure capabilities toward sustaining communities through digitalized AVCs.

This study focuses on formulating the most sustainable concrete by incorporating recycled concrete aggregates and other products retrieved from construction and demolition (C&D) activities. Both recycled coarse aggregates (RCA) and recycled fine aggregates (RFA) are firstly used to fully replace the natural coarse and fine aggregates in the concrete mix design. Later, the cement rich ultrafine particles, recycled glass powder and mineral fibres recovered from construction and demolition wastes (CDW) are further incorporated at a smaller rate either as cement substituent or as supplementary additives. Remarkable properties are noticed when the RCA (4–12 mm) and RFA (0.25–4 mm) are fully used to replace the natural aggregates in a new concrete mix. The addition of recycled cement rich ultrafines (RCU), Recycled glass ultrafines (RGU) and recycled mineral fibres (RMF) into recycled concrete improves the modulus of elasticity. The final concrete, which comprises more than 75% (wt.) of recycled components/materials, is believed to be the most sustainable and green concrete mix. Mechanical properties and durability of this concrete have been studied and found to be within acceptable limits, indicating the potential of recycled aggregates and other CDW components in shaping sustainable and circular construction practices. The authors wish to acknowledge the financial support from EU Horizon 2020 Project VEEP ‘‘Cost-Effective Recycling of C&DW in High Added Value Energy Efficient Prefabricated Concrete Compo-nents for Massive Retrofitting of our Built Environment” (No.723582).

IT technologies related to Industry 4.0 facilitate the implementation of the framework for sustainable manufacturing. At the same time, Industry 4.0 integrates IT processes and systems of production companies with IT solutions of cooperating companies that support a complete manufactured product life cycle. Thus, the implementation of sustainable manufacturing implies a rapid increase in interfaces between IT solutions of cooperating companies. This, in turn, raises concerns about security among manufacturing company executives. The lack of a recognized methodology supporting the decision-making process of choosing the right methods and means of cybersecurity is, in effect, a significant barrier to the development of sustainable manufacturing. As a result, the propagation of technologies in Industry 4.0 and the implementation of the sustainable manufacturing framework in companies are slowing down significantly. The main novelty of this article, addressing the above deficiencies, is the creation, using the combined DEMATEL and ANP (DANP) and PROMETHEE II methods, of a ranking of the proposed three groups of measures, seven dimensions and twenty criteria to be implemented in companies to ensure cybersecurity in Industry 4.0 and facilitate the implementation of the sustainable production principles. The contribution of Industry 4.0 components and the proposed cybersecurity scheme to achieve the Sustainable Development goals, reducing the carbon footprint of companies and introducing circular economy elements was also indicated. Using DANP and PROMETHEE II, it can be concluded that: (i) the major criterion of cybersecurity in companies is validation and maintaining electronic signatures and seals; (ii) the most crucial area of cybersecurity is network security; (iii) the most significant group of measures in this regard are technological measures.