• Energy Research
• 7. Clean energy close
• 12. Responsible consumption close
• 2. Zero hunger close
• English close
• Energies close

<em>Pistacia</em> <em>chinensis</em> seed oil is proposed as a promising non-edible feedstock for biodiesel production. Different extraction methods were tested and compared to obtain crude oil from the seed of <em>Pistacia</em> <em>chinensis</em>, along with various deacidification measures of refined oil. The biodiesel was produced through catalysis of sodium hydroxide (NaOH) and potassium hydroxide (KOH). The results showed that the acid value of <em>Pistacia</em> <em>chinensis</em> oil was successfully reduced to 0.23 mg KOH/g when it was extracted using ethanol. Consequently, the biodiesel product gave a high yield beyond 96.0%. The transesterification catalysed by KOH was also more complete. Fourier transform infrared (FTIR) spectroscopy was used to monitor the transesterification reaction. Analyses by gas chromatography-mass spectrometry (GC-MS) and gas chromatography with a flame ionisation detector (GC-FID) certified that the <em>Pistacia</em> <em>chinensis</em> biodiesel mainly consisted of C₁₈ fatty acid methyl esters (81.07%) with a high percentage of methyl oleate. Furthermore, the measured fuel properties of the biodiesel met the required standards for fuel use. In conclusion, the <em>Pistacia</em> <em>chinensis</em> biodiesel is a qualified and feasible substitute for fossil diesel.

This study includes analysis of encapsulation materials from lithium-ion pouch cells and water vapour transmission rate (WVTR) measurements. WVTR measurements are performed on both fresh and environmentally stressed lithium-ion pouch cells. Capacity measurements are performed on both the fresh and the environmentally stressed battery cells to identify possible influences on electrochemical performance. Preparation of the battery cells prior to WVTR measurements includes opening of battery cells and extraction of electrode material, followed by resealing the encapsulations and adhesively mounting of gas couplings. A model describing the water diffusion through the thermal welds of the encapsulation are set up based on material analysis of the encapsulation material. Two WVTR equipments with different type of detectors are evaluated in this study. The results from the WVTR measurements show how important it is to perform this type of studies in dry environment and apply a rigorous precondition sequence before testing. Results from modelling confirm that the WVTR method has potential to be used for measurements of water diffusion into lithium-ion pouch cells. Consequently, WVTR measurements should be possible to use as a complement or alternative method to for example Karl Fisher titration.

Bioenergy is currently regarded as a renewable energy source with a high growth potential. Forest-based biodiesel, with the significant advantage of not competing with grain production on cultivated land, has been considered as a promising substitute for diesel fuel by many countries, including China. Consequently, extracting biodiesel from <em>Jatropha</em><em> curcas</em> has become a growing industry. However, many key issues related to the development of this industry are still not fully resolved and the prospects for this industry are complicated. The aim of this paper is to evaluate the net energy, CO₂ emission, and cost efficiency of <em>Jatropha</em> biodiesel as a substitute fuel in China to help resolve some of the key issues by studying data from this region of China that is well suited to growing <em>Jatropha</em>. Our results show that: (1) <em>Jatropha</em> biodiesel is preferable for global warming mitigation over diesel fuel in terms of the carbon sink during <em>Jatropha</em> tree growth. (2) The net energy yield of <em>Jatropha</em> biodiesel is much lower than that of fossil fuel, induced by the high energy consumption during <em>Jatropha</em> plantation establishment and the conversion from seed oil to diesel fuel step. Therefore, the energy efficiencies of the production of <em>Jatropha</em> and its conversion to biodiesel need to be improved. (3) Due to current low profit and high risk in the study area, farmers have little incentive to continue or increase <em>Jatropha</em> production. (4) It is necessary to provide more subsidies and preferential policies for <em>Jatropha</em> plantations if this industry is to grow. It is also necessary for local government to set realistic objectives and make rational plans to choose proper sites for <em>Jatropha</em> biodiesel development and the work reported here should assist that effort. Future research focused on breading high-yield varieties, development of efficient field management systems, and detailed studies lifecycle environmental impacts analysis is required to promote biologically and economically sustainable development of <em>Jatropha</em> biodiesel and to assist government agencies in setting realistic objectives and appropriate and advantageous policies for the regions and the country.

The recovery of natural gas from CH₄-hydrate deposits in sub-marine and sub-permafrost environments through injection of CO₂ is considered a suitable strategy towards emission-neutral energy production. This study shows that the injection of hot, supercritical CO₂ is particularly promising. The addition of heat triggers the dissociation of CH₄-hydrate while the CO₂, once thermally equilibrated, reacts with the pore water and is retained in the reservoir as immobile CO₂-hydrate. Furthermore, optimal reservoir conditions of pressure and temperature are constrained. Experiments were conducted in a high-pressure flow-through reactor at different sediment temperatures (2 °C, 8 °C, 10 °C) and hydrostatic pressures (8 MPa, 13 MPa). The efficiency of both, CH₄ production and CO₂ retention is best at 8 °C, 13 MPa. Here, both CO₂- and CH₄-hydrate as well as mixed hydrates can form. At 2 °C, the production process was less effective due to congestion of transport pathways through the sediment by rapidly forming CO₂-hydrate. In contrast, at 10 °C CH₄ production suffered from local increases in permeability and fast breakthrough of the injection fluid, thereby confining the accessibility to the CH₄ pool to only the most prominent fluid channels. Mass and volume balancing of the collected gas and fluid stream identified gas mobilization as equally important process parameter in addition to the rates of methane hydrate dissociation and hydrate conversion. Thus, the combination of heat supply and CO₂ injection in one supercritical phase helps to overcome the mass transfer limitations usually observed in experiments with cold liquid or gaseous CO₂.

A steady state simulation of syngas production from a Steam Oxygen Gasification process using commercial technologies was performed using Aspen Plus&#174;. For the simulation, the average proximate and ultimate compositions of bituminous coal obtained from the Colombian Andean region were employed. The simulation was applied to conduct sensitivity analyses in the O2 to coal mass ratio, coal slurry concentration, WGS operating temperature and WGS steam to dry gas molar ratio (SDG) over the key parameters: syngas molar composition, overall CO conversion in the WGS reactors, H2 rich-syngas lower heating value (LHV) and thermal efficiency. The achieved information allows the selection of critical operating conditions leading to improve system efficiency and environmental performance. The results indicate that the oxygen to carbon ratio is a key variable as it affects significantly both the LHV and thermal efficiency. Nevertheless, the process becomes almost insensitive to SDG values higher than 2. Finally, a thermal efficiency of 62.6% can be reached. This result corresponds to a slurry solid concentration of 0.65, a WGS process SDG of 0.59, and a LTS reactor operating temperature of 473 K. With these fixed variables, a syngas with H2 molar composition of 92.2% and LHV of 12 MJ Nm&#8722;3 was attained.

The effect of foliar application of Cyanobacteria and Chlorella sp. monocultures on physiological activity, element composition, development and biomass weight of basket willow (Salix viminalis L.) and the possibility to prepare biofuel from it in the fortification process was studied. Triple foliar plant spraying with non-sonicated monocultures of Cyanobacteria (Anabaena sp. PCC 7120, Microcystis aeruginosa MKR 0105) and Chlorella sp. exhibited a considerably progressive impact on metabolic activity and development of plants. This biofertilization increased cytomembrane impermeability, the amount of chlorophyll in plants, photosynthesis productivity and transpiration, as well as degree of stomatal opening associated with a decreased concentration of intercellular CO2, in comparison to control (treatments with water, Bio-Algeen S90 or with environmental sample). The applied strains markedly increased the element content (N, P, K) in shoots and the productivity of crucial growth enzymes: alkaline or acid phosphorylase, total dehydrogenases, RNase and nitrate reductase. Treatments did not affect energy properties of the burnt plants. These physiological events were associated with the improved growth of willow plants, namely height, length and amount of all shoots and their freshly harvested dry mass, which were increased by over 25% compared to the controls. The effectiveness of these treatments depended on applied monoculture. The plant spraying with Microcystis aeruginosa MKR 0105 was a little more effective than treatment with Chlorella sp. and Anabaena sp. or the environmental sample. The research demonstrate that the studied Cyanobacteria and Chlorella sp. monocultures have prospective and useful potential in production of Salix viminalis L., which is the basic energy plant around the word. In this work, a special batch reactor was used to produce torrefaction material in an inert atmosphere: nitrogen, thermogravimetric analysis and DTA analysis, like Fourier-transform infrared spectroscopy. The combustion process of Salix viminalis L. with TG-MS analysis was conducted as well as study on a willow torrefaction process, obtaining 30% mass reduction with energy loss close to 10%. Comparing our research results to other types of biomasses, the isothermal temperature of 245 °C during thermo-chemical conversion of willow for the carbonized solid biofuel production from Salix viminalis L. biomass fertilized with Cyanobacteria and Chlorella sp. is relatively low. At the end, a SEM-EDS analysis of ash from torrefied Salix viminalis L. after carbonization process was conducted.

PHEVs and BEVs make use of battery cells optimized for high energy rather than for high power. This means that the power abilities of these batteries are limited. In order to enhance their performance, a hybrid Rechargeable Energy Storage System (RESS) architecture can be used combining batteries with electrical-double layer capacitors (EDLCs). Such a hybridized architecture can be accomplished using passive or active systems. In this paper, the characteristics of these topologies have been analyzed and compared based on a newly developed hybridization simulation tool for association of lithium-ion batteries and EDLCs. The analysis shows that the beneficial impact of the EDLCs brings about enhanced battery performances in terms of energy efficiency and voltage drops, rather than extension of vehicle range. These issues have been particularly studied for the passive and active hybrid topologies. The classical passive and active topologies being expensive and less beneficial in term of cost, volume and weight, a new hybrid configuration based on the parallel combination of lithium-ion and EDLCs on cell level has been proposed in this article. This topology allows reducing cost, volume, and weight and system complexity in a significant way. Furthermore, a number of experimental setups have illustrated the power of the novel topology in terms of battery capacity increase and power capabilities during charging and discharging. Finally, a unique cycle life test campaign demonstrated that the lifetime of highly optimized lithium-ion batteries can be extended up to 30%&#8211;40%.

This study assesses Thailand’s energy policies on renewable electricity generation and energy efficiency in industries and buildings. The CO₂ emissions from power generation expansion plans (PGEPs) are also evaluated. The PGEPs of CO₂ reduction targets of 20% and 40% emissions are also evaluated. Since 2008 Thai government has proposed the Alternative Energy Development Plan (AEDP) for renewable energy utilization. Results from energy efficiency measures indicate total cost saving of 1.34% and cumulative CO₂ emission reduction of 59 Mt-CO₂ in 2030 when compared to the business-as-usual (BAU) scenario. It was found that subsidies in the AEDP will promote renewable energy utilization and provide substantial CO₂ mitigation. As a co-benefit, fuel import vulnerability can be improved by 27.31% and 14.27% for CO₂ reduction targets of 20% and 40%, respectively.

While focus in oil-producing microalgae is normally on nutrient deficiency, we addressed the seasonal variations of lipid content and composition in large-scale cultivation. Lipid content, fatty acid profiles and mono- di- and triglycerides (MAGs, DAGs, and TAGs) were analyzed during May 2007–May 2009 in <em>Nannochloropsis oculata</em> grown outdoors in closed vertical flat panels photobioreactors. Total lipids (TL) ranged from 11% of dry weight (DW) in winter to 30% of DW in autumn. 50% of the variation in TL could be explained by light and temperature. As the highest lipid content was recorded during autumn indicating an optimal, non-linear, response to light and temperature we hypothesize that enhanced thylakoid stacking under reduced light conditions resulted in more structural lipids, concomitantly with the increase in glycerides due to released photo-oxidative stress. The relative amount of monounsaturated fatty acids (MUFA) increased during autumn. This suggested a synthesis, either of structural fatty acids as MUFA, or a relative increase of C16:1 incorporated into TAGs and DAGs. Our results emphasize the significant role of environmental conditions governing lipid content and composition in microalgae that have to be considered for correct estimation of algal oil yields in biodiesel production.

Plug-in hybrid electric vehicles (PHEVs) have a large potential to reduce greenhouse gases emissions and increase fuel economy and fuel flexibility. PHEVs are propelled by the energy from both gasoline and electric power sources. Penetration of PHEVs into the automobile market affects the electrical grid through an increase in electricity demand. This paper studies effects of the wide spread adoption of PHEVs on peak and base load demands in Ontario, Canada. Long-term forecasting models of peak and base load demands and the number of light-duty vehicles sold were developed. To create proper forecasting models, both linear regression (LR) and non-linear regression (NLR) techniques were employed, considering different ranges in the demographic, climate and economic variables. The results from the LR and NLR models were compared and the most accurate one was selected. Furthermore, forecasting the effects of PHEVs penetration is done through consideration of various scenarios of penetration levels, such as mild, normal and aggressive ones. Finally, the additional electricity demand on the Ontario electricity grid from charging PHEVs is incorporated for electricity production planning purposes.