This project seeks to develop processes and resources towards sustainable and inexpensive high quality transparent conducting oxide (TCO) films (and printed tracks) on float glass, plastics and steel. In particular replacement materials for Indium Tin Oxide (ITO) and F-doped Tin Oxide (FTO). These materials are used in low-e window coatings (>£5B pa), computers, phones and PV devices. The current electronics market alone is worth in excess of £0.9 Trillion and every tablet PC uses ca 3g of tin. Indium is listed as a critical element- available in limited amounts often in unstable geopolitical areas. Tin metal has had the biggest rise in price of any metal consecutively in the last four years (valued at >£30K per ton) and indium is seen as one of the most difficult to source elements. In this project we will develop sustainable upscaled routes to TCO materials from precursors containing earth abundant elements (titanium, aluminium, zinc) with equivalent or better figures of merit to existing TCOs. Our method uses Aerosol assisted (AA) CVD to develop large scale coatings and developing new manufacturing approach to printed TCOs using highly uniform nanoparticle dispersions. AACVD has not been upscaled- although the related Atmospheric pressure (AP) CVD is widely used industrially. APCVD was developed in the UK (Pilkington now NSG) for commercial window coating methods- and in the UK glass industry supports >5000 jobs in the supply chain. Our challenge is to take our known chemistry and develop the underpinning science to demonstrate scale up routes to large area coatings. This will include pilot scale AACVD, nanoparticle dispersions and inks. Common precursor sets will be utilized in all the techniques. Our focus will be to ensure that the UK maintains a world-leading capability in the manufacturing of and with sustainable TCOs. This will be achieved by delivering two new scale up pathways one based on AACVD- for large area coatings and inks and dispersions for automotive and PC use. We will use known and sustainable metal containing precursors to deposit TCOs that do not involve rare elements (e.g. based on Ti, Zn, Al). Key issues will be (1) taking the existing aerosol assisted chemical vapour deposition (AACVD) process from small lab scale to a large pilot lab scale reactor (TRL3) and (2) developing a new approach to TCOs from transparent nanoparticle dispersions synthesized in a continuous hydrothermal flow systems (CHFS) reactor using an existing EPSRC funded pilot plant process (kg/h scale). Nano-dispersions will be formulated for use by the rest of the team, in jet and screen printing, advanced microwave processing and TCO application testing. Industry partners will provide engineering support, guidance on the aerosol transport issues, scale up and dynamic coating trials (Pilkington now NSG), jet and screen printing on glass (Xaar, Akzo Nobel, CPI) and use the TCO targets for Magnetron Sputtering of thin films on plastics (Teer Coatings). The two strands will be overseen by Life-cycle modelling and cost benefit analyses to take a holistic approach to the considerations of energy, materials consumption and waste and, in consultation with key stakeholders and policy makers, identify best approaches to making improvement or changes, e.g. accounting for environmental legislation in nanomaterials, waste disposal or recyclability of photovoltaics. We believe there is a real synergy of having two strands as they are linked by common scale up manufacturing issues and use similar process chemistries and precursors.

Metal thin films are used in a wide variety of technologies, such as solar cells and printed circuit boards for electronics. Inkjet printing has emerged as a practical and low-cost route for manufacturing electrical contacts in these applications. However existing manufacturing technologies use inks that often require a final heat treatment to consolidate or 'sinter' the film. If this last step can be eliminated, by depositing fully dense films, then the inkjet manufacturing process could be applied to temperature sensitive substrates like plastics or vulnerable semiconductor materials. The purpose of this project is to develop 'sinter-free' inkjet manufacturing processes, by taking ink precursors developed for other thin film processes, and exploiting them to use the significant benefits of inkjet process technology e.g. the direct writing of interconnects or wires. If successful, the project will represent a step-change in the manufacturing methods for this type of film.

There is a strong need for a new network to consolidate electronics research in UK universities. In recent years there have been major changes in technology, as the push for miniaturization has led to components with characteristics far from ideal transistor switches interconnected by wires instantaneously. Today's transistors get too hot, leak current, vary in size and are produced in their billions on chips the size of a thumb nail interconnected relatively slowly by miles of wiring. This creates a formidable challenge for designers, who already face the complexity of design on a bewildering scale. The public have an appetite for all things electronic and demand new and better products year on year. This also creates a challenge for designers and an opportunity for the electronics community. By working together these challenges can be tackled, making the UK's electronics community fit for purpose in the coming years to face critical challenges at the interface between design and technology. Complementing industry facing groups such as the National Microelectronics Institute (NMI) and the Electronics Knowledge Transfer Network (EKTN), the network will form part of a highly visible coordinated alliance to government and the media, who can use it for information, opinion and clarification in this space. This is important for the UK economy as the global electronics market is worth more than a trillion dollars annually. The initial membership will be drawn from the technology community who formed the Si Futures network and those participating in the design Common Vision. Together they represent a significant proportion of the UK academic community. There is a recognition that a broader electronics research community than those included in the previous network grants need to come together.