Natural resources are the foundation of our life on Earth, without which neither our economy nor society can function. However, due to continued resource overconsumption and the rapidly increasing world population, the global demand for natural resources and the related intense pressure on our environment have reached an unprecedented and unsustainable level. A shocking fact is that our cumulative consumption of natural resources over the last 60 years is greater than that over the whole of previous human history. With an anticipated world population of 9.3bn in 2050, the predicted global natural resource consumption will be almost tripled. This level of overconsumption is obviously not sustainable, and there is a compelling need for us to use our advanced science and technology to work with, rather than to exploit, nature. Metallic materials are the backbone of manufacturing and the fuel for economic growth. However, metal extraction and refining is extremely energy intensive and causes a huge negative impact on our environment. The world currently produces 50MT of Al and 2bnT of steel each year, accounting for 7-8% of the world's total energy consumption and 8% of the total global CO2 emission. Clearly, we cannot continue this increasing and dissipative use of our limited natural resources. However, the good news is that metals are in principle infinitely recyclable and that their recycling requires only a small fraction of the energy required for primary metal production. Between 1908 and 2007 we produced 833MT of aluminium, 506MT of copper and 33bnT of steels. It is estimated that more than 50% of this metal still exists as accessible stock in our society. Such metal stock will become our energy "bank" and a rich resource for meeting our future needs. The UK metal casting industry adds £2.6bn/yr to the UK economy, employs 30,000 people, produces 1.14bnT of metal castings per year and underpins the competitive position of every sector of UK manufacturing. However, the industry faces severe challenges, including "hollowing-out" over the past 30 years, increasing energy and materials costs, tightening environmental regulations and a short supply of skilled people. We are now establishing the Future Liquid Metal Engineering Hub to address these challenges. The core Hub activities will be based at Brunel strongly supported by the complementary expertise of our academic spokes at Oxford, Leeds, Manchester and Imperial College and with over £40M investment from our industrial partners. The Hub's long-term vision is full metal circulation, in which the global demand for metallic materials is met by a full circulation of secondary metals (with only limited addition of primary metals each year) through reduced usage, reuse, remanufacture, closed-loop recycling and effective recovery and refining of secondary metals. This represents a paradigm shift for metallurgical science, manufacturing technology and the industrial landscape. The Hub aims to lay down a solid foundation for full metal circulation, demonstrated initially with light metals and then extended to other metals in the longer term. We have identified closed-loop recycling of metallic materials as the greatest challenge and opportunity facing global manufacturing industry, and from this we have co-created with our industrial partners the Hub's research programme. We will conduct fundamental research to deliver a nucleation centred solidification science to underpin closed-loop recycling; we will carry out applied research to develop recycling-friendly high performance metallic materials and sustainable metal processing technologies to enable closed-loop recycling; we will operate a comprehensive outreach programme to engage potential stakeholders to ensure the widest possible impact of our research; we will embed a centre for doctoral training in liquid metal engineering to train future leaders to deliver long-lasting benefits of closed-loop recycling.

Forming components from light alloys (aluminium, titanium and magnesium) is extremely important to sustainable transport because they can save over 40% weight, compared to steel, and are far cheaper and more recyclable than composites. This has led to rapid market growth, where light alloys are set to dominate the automotive sector. Remaining globally competitive in light metals technologies is also critical to the UK's, aerospace and defence industries, which are major exporters. For example, Jaguar Land Rover already produces fully aluminium car bodies and titanium is extensively used in aerospace products by Airbus and Rolls Royce. 85% of the market in light alloys is in wrought products, formed by pressing, or forging, to make components. Traditional manufacturing creates a conflict between increasing a material's properties, (to increase performance), and manufacturability; i.e. the stronger a material is, the more difficult and costly it is to form into a part. This is because the development of new materials by suppliers occurs largely independently of manufacturers, and ever more alloy compositions are developed to achieve higher performance, which creates problems with scrap separation preventing closed loop recycling. Thus, often manufacturability restricts performance. For example, in car bodies only medium strength aluminium grades are currently used because it is no good having a very strong alloy that can't be made into the required shape. In cases when high strength levels are needed, such as in aerospace, specialised forming processes are used which add huge cost. To solve this conundrum, LightForm will develop the science and modelling capability needed for a new holistic approach, whereby performance AND manufacturability can both be increased, through developing a step change in our ability to intelligently and precisely engineer the properties of a material during the forming of advanced components. This will be achieved by understanding how the manufacturing process itself can be used to manipulate the material structure at the microscopic scale, so we can start with a soft, formable, material and simultaneously improve and tailor its properties while we shape it into the final product. For example, alloys are already designed to 'bake harden' after being formed when the paint on a car is cured in an oven. However, we want to push this idea much further, both in terms of performance and property prediction. For example, we already have evidence we can double the strength of aluminium alloys currently used in car bodies by new synergistic hybrid deformation and heat treatment processing methods. To do this, we need to better understand how materials act as dynamic systems and design them to feed back to different forming conditions. We also aim to exploit exciting developments in powerful new techniques that will allow us to see how materials behave in industrial processes in real time, using facilities like the Diamond x-ray synchrotron, and modern modelling methods. By capturing these effects in physical models, and integrating them into engineering codes, we will be able to embed microstructure engineering in new flexible forming technologies, that don't use fixed tooling, and enable accurate prediction of properties at the design stage - thus accelerating time to market and the customisation of products. Our approach also offers the possibility to tailor a wide range of properties with one alloy - allowing us to make products that can be more easily closed-loop recycled. We will also use embedded microstructure engineering to extend the formability of high-performance aerospace materials to increase precision and decrease energy requirements in forming, reducing the current high cost to industry.