Abstract In this paper, melting of a phase change material (PCM) inside a rectangular enclosure, possibly finned and inclined, is studied numerically. The application of this work is related to the temperature control of a finned PV panel filled with PCM and installed at different tilt angles. The studied system is modeled as a 2D rectangular enclosure filled with PCM (RT25) and packed between two aluminum plates, where the front side is exposed to a constant heat flux of 1000 W/m2 for 2 h. Four geometries were considered including a non-finned PCM enclosure, a PCM enclosure with one centered full-width fin, one half-width fin attached to the front plate, and one half-width fin attached to the back plate. Results have shown that the most efficient thermal management of the PV-PCM panel is obtained when the PCM enclosure is equipped with a full-width fin simultaneously attached to the front and back plates. With such a PV panel design, the PCM melting is dominated by natural convection heat transfer from both sides of the PCM enclosure at an early stage, with added heat losses from the back plate to the external environment. Accordingly, low values of the front and back plates temperatures can be maintained during a stabilization time of 80 min as long as the tilt angle is varied from 0° to 75° from the vertical. The efficient temperature control resulting from the full-width fin geometry is mainly related to the high overall heat transfer coefficient obtained during the whole melting process.