• Energy Research
• Closed Access close
• US close
• CN close
• AU close
• Aurora Universities Network close

Efficiency of energy resource use is a key factor for a sustainable energy future. By matching the exergy levels of supply and demand, Energy Quality Management (EQM) of building energy supply systems may achieve more efficient use of energy resources. Beyond this, environmental impact of energy supply systems is another essential issue. This work addresses the influence of EQM on CO 2 emissions in the operation optimization of a Distributed Energy System (DES). A multi-objective linear programming problem is formulated to reduce energy costs and increase the overall exergy efficiency. Total CO 2 emissions are evaluated for the optimized operation strategies of the DES. The operators of the DES can choose the operation strategy from the Pareto front, based on their priorities and also aware of effects on CO 2 emissions. Results demonstrate more efficient use of energy resources and reduction in CO 2 emissions through EQM, as compared with conventional energy supply systems.

Abstract Sodium-promoted vanadium oxide catalysts supported on MCM-41 and TiO 2 (anatase) were investigated for the partial oxidation of ethanol to acetaldehyde. The catalysts were prepared by incipient wetness impregnation with a vanadium oxide content of 6 wt.%. The experimental characterization was performed by X-ray diffraction (XRD), N 2 adsorption, temperature-programmed reduction (TPR), and diffuse reflectance UV–vis. Temperature-programmed oxidation (TPO) was also used to identify carbon deposits on the spent catalysts. The presence of sodium plays a strong role in the dispersion and reducibility of the vanadium species as detected by TPR analysis and optical absorption spectroscopy. While sodium addition increases the dispersion of the VO x species, its presence also decreases their reducibility. Additionally, TPO of the spent catalysts revealed that an increase in the Na loading decreases the carbon deposition during reaction. In the case of the catalysts supported on MCM-41, these modifications were mirrored by a change in the activity and selectivity to acetaldehyde. Additionally, on the VO x /TiO 2 catalysts the catalytic activity decreased with increasing sodium content in the catalyst . A model in which sodium affects dispersion, reducibility and also acidity of the supported-vanadia species is proposed to explain all these observations.

We report measurement of initial G2-chromatid breaks in normal human fibroblasts exposed to various types of high-LET particles. Exponentially growing AG 1522 cells were exposed to gamma rays or heavy ions. Chromosomes were prematurely condensed by calyculin A. Chromatid-type breaks and isochromatid-type breaks were scored separately. The dose response curves for the induction of total chromatid breaks (chromatid-type + isochromatid-type) and chromatid-type breaks were linear for each type of radiation. However, dose response curves for the induction of isochromatid-type breaks were linear for high-LET radiations and linear-quadratic for gamma rays. Relative biological effectiveness (RBE), calculated from total breaks, showed a LET dependent tendency with a peak at 55 keV/micrometer silicon (2.7) or 80 keV/micrometer carbon (2.7) and then decreased with LET (1.5 at 440 keV/micrometer). RBE for chromatid-type break peaked at 55 keV/micrometer (2.4) then decreased rapidly with LET. The RBE of 440 keV/micrometer iron particles was 0.7. The RBE calculated from induction of isochromatid-type breaks was much higher for high-LET radiations. It is concluded that the increased production of isochromatid-type breaks, induced by the densely ionizing track structure, is a signature of high-LET radiation exposure.

Computed tomography of chemiluminescence (CTC) is one kind of volumetric tomography which can recover 3D flame structures and has found extensive applications for spatiotemporally resolved measurements of flames. However, the existing CTC techniques rely on the pinhole model and fail when the flames are confined within a cylindrical glass due to image distortion caused by the refraction on both the internal and external surfaces of the glass. In this work, a refined camera model was developed by combining the pinhole camera model with Snell's laws using a reverse ray-tracing method to incorporate the effects of refraction. A proof-of-concept demonstration of CTC based on the refined camera model was conducted on a swirl flame confined within a 20-mm-thick K9 glass. The results proved the superiority of such technique against the existing version in terms of reconstruction accuracy. This work is expected to be especially useful for the study of combustion phenomena such as combustion instability for which the flames are typically confined within cylindrical combustors.

Confluent human fibroblast cells were exposed to 6 Gy gamma-rays or 200 MeV/nucleon Fe ions at 0.7 or 3 Gy. The cells were allowed to repair for 24 hours after exposure and chromosomes were collected using a premature chromosome condensation technique with calyculin-A. Chromosome aberrations were analyzed using the multicolor FISH (mFISH) technique that allows identification of both complex and truly incomplete exchanges. Results showed that both doses of the Fe ions produced higher ratios of complex to simple exchanges and lower ratio of complete to incomplete exchanges than the 6 Gy gamma-exposure. The ratios of aberration yields were similar for the two doses of Fe ions. After 0.7 Gy of Fe ions, most complex aberrations were found to involve three or four chromosomes, indicating this is the maximum number of chromosome domains traversed by a single Fe ion track.

Abstract Species concentration (e.g. CO) and temperature measurements in the combustion field require fast-response technique without interfering species. In the last decade, tunable diode lasers have been established as strong technique to measure species such as CO, CO2, and H2O as well as temperature with high sensitivity. The drawback is the degree of interference that might hamper the robustness of the technique. In this work simultaneous measurements of temperature and CO concentration were carried out using an interference-free mid-infrared laser-based absorption technique behind reflected shock waves. Two transition lines of CO (P(v″ = 0, J″ = 21) and P(v″ = 1, J″ = 21)) in the fundamental vibrational band near 4.87 and 4.93 μm, respectively, were selected. Absorbance interferences from CO2 and H2O at room and high temperatures were evaluated. Spectroscopic parameters for the development of the system were measured: line strengths and collisional broadening coefficients (in Ar) of both lines were obtained at 1020–1950 K by using the scanned-wavelength direct-absorption method. The technique was demonstrated for non-reactive and reactive mixtures. For the non-reactive case, temperature and CO concentration were measured at 1030–1910 K and 1.0–3.7 bar. For the reactive case, oxidation of i-C8H18/O2/Ar and i-C8H18/C2H5OH/O2/Ar mixtures were investigated at three equivalence ratios of 2.0, 1.0, and 0.5. The two newly adopted lines exhibited good performance in the detection of CO concentration and are immune to interferences from CO2 and H2O. In addition, the simulated data from the state-of-the-art isooctane/ethanol mechanisms in literature were compared with the measured data, showing overall good agreement.