• Energy Research
• other engineering and technologies close
• IT close
• Aurora Universities Network close

Efficiency of energy resource use is a key factor for a sustainable energy future. By matching the exergy levels of supply and demand, Energy Quality Management (EQM) of building energy supply systems may achieve more efficient use of energy resources. Beyond this, environmental impact of energy supply systems is another essential issue. This work addresses the influence of EQM on CO 2 emissions in the operation optimization of a Distributed Energy System (DES). A multi-objective linear programming problem is formulated to reduce energy costs and increase the overall exergy efficiency. Total CO 2 emissions are evaluated for the optimized operation strategies of the DES. The operators of the DES can choose the operation strategy from the Pareto front, based on their priorities and also aware of effects on CO 2 emissions. Results demonstrate more efficient use of energy resources and reduction in CO 2 emissions through EQM, as compared with conventional energy supply systems.

Battery participation in the service of power system frequency regulation is universally recognized as a viable means for counteracting the dramatic impact of the increasing utilization of renewable energy sources. One of the most complex aspects, in both the planning and operation stage, is the adequate characterization of the dynamic variation of the state of charge of the battery in view of lifetime preservation as well as the adequate participation in the regulation task. Since the power system frequency, which is the input of the battery regulation service, is inherently of a stochastic nature, it is easy to argue that the most proper methodology for addressing this complex issue is that of the theory of stochastic processes. In the first part of the paper, a preliminary characterization of the power system frequency is presented by showing that with an optimal degree of approximation it can be regarded as an Ornstein–Uhlenbeck process. Some considerations for guaranteeing desirable performances of the control strategy are performed by assuming that the battery-regulating power depending on the frequency can be described by means of a Wiener process. In the second part of the paper, more realistically, the regulating power due to power system changes is described as an Ornstein–Uhlenbeck or an exponential shot noise process driven by a homogeneous Poisson process depending on the frequency response features requested of the battery. Because of that, the battery state of charge is modeled as the output of a dynamic filter having this exponential shot noise process as input and its characterization constitutes the central role for the correct characterization of the battery life. Numerical simulations are carried out for demonstrating the goodness and the applicability of the proposed probabilistic approach.

The safeguard of power equipments is assuming a major role in the deregulated electricity market, where a malfunctioning power system could be responsible for serious damages to a large number of system operators having access to the shared energy resource. In this context thermal monitoring of power cables represents a key issue in evaluating the risks associated with a given load management policy especially during emergency conditions. In particular this demands for reliable assessment models that should be able to predict the transient thermal behaviour when the load exceeds the nameplate value. In this connection the application of both simplified and detailed power cable thermal models is often complicated by the presence of uncertainties affecting the tolerances of the input data. The effect of these uncertainties could influence the final solution to a considerable extent. A comprehensive tolerance analysis is therefore required in order to incorporate the effect of data uncertainties into the thermal modelling process. To address this problem, in the paper the employment of interval mathematic is proposed. Several numerical results are presented and discussed in order to assess the effectiveness of the proposed methodology which offer a rough qualitative insight of the solution in a very short time, comparable to the time required for a deterministic numerical simulation.

This paper presents an optimal control strategy for a district heating power plant with thermal energy storage. The main goal of the control strategy is to reduce the operation costs of the power plant, by scheduling the boilers, the operation of the thermal energy storage and the curtailment on the loads. The problem is stated as a constrained optimization in the form of a Mixed Integer Linear Program (MILP), embedded on an Model Predictive Control (MPC) framework. Particular attention is paid to modeling of boilers operating constraints, including the outlet water flow temperature, to the energy exchanged with the thermal energy storage and to the operating modes of the power plant layout, including the constraints related to the supply water temperature needed from the network. The results are performed using the data and the layout of the power plant located in the city of Ylivieska, in Finland. The cost analysis performed shows the advantages of using the predictive control strategy.

Phase change materials (PCM) are used in many industrial and residential applications for their advantageous characteristic of high capacity of latent thermal storage by means of an isothermal process. In this context, it is very useful to have predictive mathematical models for the analysis of the thermal performance and for the thermal design of these layers. In this work, an experimental validation of an analytical model that resolves the steady periodic heat transfer problem in a finite layer of PCM is presented. The experimental investigation was conducted employing a PCM with thermophysical and thermochemical behavior very close to those hypothesized in the formulation of the analytical model. For the evaluation of the thermophysical properties of the PCM sample used, an experimental procedure created by the authors was employed. In all tests realized in a sinusoidal and non-sinusoidal periodic regime, the comparison between the measured and calculated trends of the temperature at different sample heights and of the surface heat fluxes show an excellent agreement. Moreover, also having verified the analytical total stored energy, the analytical model constitutes a valid instrument for the evaluation of the latent and sensible contribution and the trend in time of the position of the bi-phase interface. Peer Reviewed

AbstractThe current standard for lighting of indoor work places (EN 12464-1) essentially prescribes values of photometric quantities (illuminance, Unified Glare Index, etc.); therefore it does not allow a comprehensive analysis of the luminous environment. In Italy, educational buildings do not always comply with the standard requirements for lighting. Therefore an analysis of their current state is needed and this paper illustrates two methods, developed by the authors, to carry out this investigation: the former is based on the analysis of luminance maps obtained through the HDR imaging technique whereas the latter focuses on the evaluation of non-visual effects of light.

The effect of trace elements (TEs) addition and NaOH pretreatment on the anaerobic digestion of rice straw was investigated in batch tests. Co, Ni and Se were added to the raw rice straw at different dosages. The NaOH pretreatment was applied to the rice straw both alone and in combination with the addition of TEs, in order to evaluate potential synergistic effects of the pretreatment and the TEs supplementation on the biogas production yields. The results obtained showed that the alkaline pretreatment was more effective than the TEs addition in increasing the cumulative biogas production, causing a 21.4% enhancement of the final biomethane yield, whereas the increase due to TEs dosing was not statistically significant. The analysis of volatile fatty acids (VFAs) confirmed that the NaOH pretreatment resulted in a higher production of VFAs, indicating an increased hydrolysis, while TEs addition did not cause significant changes in the VFA concentrations.