• Energy Research
• Restricted close
• Embargo close
• engineering and technology close
• Aurora Universities Network close

Dolomite-based binders are characterised by interesting technical and environmental features. For their synthesis, sources of both CaO and MgO are required. The idea developed in this work is to couple the synthesis of dolomite-based binders, starting from a natural dolomite, through the concept of concentrated solar energy (needed to drive the endothermal dolomite calcination process) in fluidised bed reactors. To this end, a fluidised bed system, where the concentrated solar radiation is mimicked by the use of Xe-lamps (short-arc), has been set up and operated. Natural dolomite (sieved in the 420-590 ?m size range) was calcined at a nominal temperature of 850 °C, and bed temperature profiles during solar-driven calcination were investigated. Then, four binders were prepared by mixing slaked dolomite (obtained from the hydration of solar calcined dolomite) with either blast furnace slag or coal fly ash as supplementary cementitious materials. The binders were hydrated for curing times ranging from 7 to 56 days. X-ray fluorescence, X-ray diffraction and combined differential thermal and thermogravimetric analyses were employed as characterisation techniques both to analyse the chemical composition of starting materials and to investigate the evolution of the hydration in the four systems.

The safeguard of power equipments is assuming a major role in the deregulated electricity market, where a malfunctioning power system could be responsible for serious damages to a large number of system operators having access to the shared energy resource. In this context thermal monitoring of power cables represents a key issue in evaluating the risks associated with a given load management policy especially during emergency conditions. In particular this demands for reliable assessment models that should be able to predict the transient thermal behaviour when the load exceeds the nameplate value. In this connection the application of both simplified and detailed power cable thermal models is often complicated by the presence of uncertainties affecting the tolerances of the input data. The effect of these uncertainties could influence the final solution to a considerable extent. A comprehensive tolerance analysis is therefore required in order to incorporate the effect of data uncertainties into the thermal modelling process. To address this problem, in the paper the employment of interval mathematic is proposed. Several numerical results are presented and discussed in order to assess the effectiveness of the proposed methodology which offer a rough qualitative insight of the solution in a very short time, comparable to the time required for a deterministic numerical simulation.

The presented article will describe an 'effect-cause' model for the purpose of simulating the energy consumption of DC fed light rail vehicles. The model will assess the advantages of hybrid vehicles in terms of energy consumption, network power and voltage variations, line current and losses; and will help sizing and designing a supercapacitor based energy storage system (ESS) for both on-board, and stationary applications. The proposed modeling needs to allow the ESS sizing according to the objective that needs to be achieved, being braking energy recovery, voltage drop compensation and peak power shaving the most common goals of ESS use in hybrid vehicles. The needed power and energy levels will vary in function of the vehicle features and the driving cycle followed. This all can be determined by the quasi-static simulation tool to ease the design process. Another objective of the modeling tool is to evaluate the behaviour of the vehicle power flow controller, which manages the power from/to the ESS in function of the state of several variables.

Abstract In the field of innovative power sources, photovoltaic are playing an important role as new clean energy generators. The performances being dependent on instantaneous weather condition, photovoltaic sources are usually equipped with an auxiliary energy storage device. There are applications where the opportunity to couple the photovoltaic source with ultracapacitor can be taken into account. The aim of the paper is to study the performances of a hybrid system constituted by photovoltaic and ultracapacitor sources. In particular, the paper deals with the study of the ultracapacitor rate design for photovoltaic systems feeding pulsing loads. The results of the study, which can also be referred to temporary unfavourable weather conditions, have been validated by experimental data. In the final part of the paper, some considerations on economical implications about the dimensioning of a photovoltaic–ultracapacitor systems are drawn.

It has been suggested that the relationship between income and the associated environmental pressure in terms of derived materials inputs and pollution levels may take an inverted-U shape, indicating a 'delinking' of environmental pressure from economic growth in relation to rising per capita incomes. The likelihood of such a relationship being persistent is discussed in the context of a simple macro model of industrial metabolism, and the possibility of 'relinking' clearly emerges. Data on specific indicators of environmental pressure (i.e., the throughput of materials, energy and the volume of transport) in 19 countries have been used to investigate patterns of delinking. The results suggest that delinking may not be persistent; already some advanced economies may be entering a new period of relinking. The relationships between environmental pressure and welfare in the medium long term may be N-shaped rather than inverted-U-shaped.

This paper investigates the energy distribution and the waste heat energy characteristics of a compression ignition engine for micro-cogeneration applications, at different engine speeds and loads. The experimental activity was carried out on a three-cylinder, 1028 cc, common-rail engine. Tests were performed with diesel fuel and a 20% v/v biodiesel blend (B20). The quantity and the quality of the waste heat energy were studied through energy and exergy analyses, respectively. Combustion characteristics were investigated by means of indicating data. Gaseous emissions were measured and particles were characterized in terms of number and size at exhaust. It was found out that the addition of 20% v/v of RME to diesel fuel does not affect significantly the brake fuel conversion efficiency and the energetic flows. On the other hand, biodiesel blend allows to reduce the combustion noise and the pollutants emissions in most of the operating conditions. A proper phasing of the injection strategy for the biodiesel blend could further reduce the exhaust emissions, mainly at high engine speeds. The results presented in this paper could be useful for the development of diesel engine based micro-cogeneration systems working at different engine speeds and loads.

This paper is focused on the design criteria of the power conversion systems operating within ultra-fast charging stations for electric vehicles. The proposed architecture is based on a DC bus, which features the integration of renewable energy sources and buffered storage systems, performing the new concept of smart grid system. Simulations of the power converters and storage systems, working as power devices of recharging station architecture, are implemented in the Matlab-Simulink environment with models of each subcomponent provided by the Sim-Power-System tool. The reported simulations are mainly devoted to verify the design criteria of the architecture scheme and the control strategies of the power fluxes related to power converters. The advantages and convenience in terms of power quality and requirementsfrom the main grid are shown, also during the EV fastcharging operations. Finally, the resulted recharging times are evaluated as comparable to the fuelling times generally taken by traditional oil based vehicles.