• Energy Research
• CN close
• DE close
• Transport Research close

In order to improve the accuracy of internal temperature estimation in batteries, a 10-parameter time-varying multi-surface heat transfer model including internal heat production, heat transfer and external heat transfer is established based on the structure of a lithium iron phosphate pouch battery and its three directional anisotropic heat conduction characteristics. The entropy heat coefficient, internal equivalent heat capacity and internal equivalent thermal resistance related to the SOC and temperature state of the battery were identified using experimental tests and the least square fitting method, and were then used for online calculation of internal heat production and heat transfer in the battery. According to the time-varying and nonlinear characteristics of the heat transfer between the surface and the environment of the battery, an internal temperature estimation algorithm based on the square root cubature Kalman filter was designed and developed. By iteratively calculating the estimated surface temperature and the measured value, dynamic tracking and online correction of the internal temperature of the battery can be achieved. The verification results using FUDS and US06 dynamic working condition data show that the proposed method can quickly eliminate the influence of initial temperature deviations and accumulated process errors and has the characteristics of a high estimation accuracy and good robustness. Compared with the estimation results of the adaptive Kalman filter, the proposed method improves the estimation accuracy of FUDS and US06 working conditions by 67% and 54%, respectively, with a similar computational efficiency.

Abstract The kinetics of methane hydrate decomposition was studied using a semibatch stirred-tank reactor. The decomposition was accomplished by reducing the pressure on a hydrate slurry in water to a value below the three-phase equilibrium pressure at the reactor temperature. The data were obtained at temperatures from 274 to 283 K and pressures from 0.17 to 6.97 MPa. The stirring rates were high enough to eliminate mass-transfer effects. Analysis of the data indicated that the decomposition rate was proportional to the particle surface area and to the difference in the fugacity of methane at the equilibrium pressure and the decomposition pressure. The proportionality constant showed an Arrhenius temperature dependence. An estimate of the hydrate particle diameters in the experiments permitted the development of an intrinsic model for the kinetics of hydrate decomposition.

To enhance path tracking precision in intelligent vehicles, this study proposes a lateral–longitudinal control strategy optimized with a Backpropagation (BP) neural network. The strategy employs the BP neural network to dynamically adjust prediction and control time-domain parameters within an established Model Predictive Control (MPC) framework, effectively computing real-time front-wheel steering angles for lateral control. Simultaneously, it integrates an incremental Proportional–Integral–Derivative (PID) approach with a meticulously designed acceleration–deceleration strategy for accurate and stable longitudinal speed tracking. The strategy’s efficiency and superior performance are validated through a comprehensive CarSim(2020)/Simulink(2020b) simulation, demonstrating that the proposed controller adeptly modulates control parameters to adapt to various road adhesion coefficients and vehicle speeds. This adaptability significantly improves tracking and driving dynamics, thereby enhancing accuracy, safety, stability, and real-time responsiveness in the intelligent vehicle tracking control system.

A reasonable plan for charging stations is critical to the widespread use of electric vehicles. In this paper, we propose an optimal planning method for electric vehicle charging stations. First of all, we put forward a forecasting method for the distribution of electric vehicle fast charging demand in urban areas. Next, a new mathematical model that considers the mutual benefit of electric vehicle users and the power grid is set up, aiming to minimize the social cost of charging stations. Then, the model is solved by the Voronoi diagram combined with improved particle swarm optimization. In the end, the proposed method is applied to an urban area, simulation results demonstrate that the proposed method can yield optimal location and capacity of each charging station. A contrasting case is carried out to verify that improved particle swarm optimization is more effective in finding the global optimal solution than particle swarm optimization.

Research to date has suggested that both individual marine species and ecological processes are expected to exhibit diverse responses to the environmental effects of climate change. Evolutionary responses can occur on rapid (ecological) timescales, and yet studies typically do not consider the role that adaptive evolution will play in modulating biological responses to climate change. Investigations into such responses have typically been focused at particular biological levels (e.g., cellular, population, community), often lacking interactions among levels. Since all levels of biological organisation are sensitive to global climate change, there is a need to elucidate how different processes and hierarchical interactions will influence species fitness. Therefore, predicting the responses of communities and populations to global change will require multidisciplinary efforts across multiple levels of hierarchy, from the genetic and cellular to communities and ecosystems. Eventually, this may allow us to establish the role that acclimatisation and adaptation will play in determining marine community structures in future scenarios.

Transport is an important source of air pollution and greenhouse gas emissions. Although the applications of information and communication technologies (ICTs) for transport, also known as intelligent transport systems, are seen as having great potential to help reduce emissions from road transport, their exact impact on CO2 emissions are uncertain for decision makers from government to industry. This uncertainty hinders the deployment of such applications. Therefore there is a need for a common evaluation approach to assess the CO2 impact of ICT measures in a systemic and realistic way. In this study, a methodology framework to evaluate the impact of ICT measures on CO2 emissions is explained. The methodology was developed within the European Union FP7 project Amitran. In particular, this study focuses on the outline and the framework architecture of the methodology as well as the required interfaces between the required models. The use of the methodology is demonstrated by applying it to a use case of dynamic traffic light systems. Finally, the efforts made to validate the methodology and make it accessible to users are explained.

AbstractAccelerated warming and melting of Arctic sea-ice has been associated with significant increases in phytoplankton productivity in recent years. Here, utilizing a multiproxy approach, we reconstruct an annually resolved record of Labrador Sea productivity related to sea-ice variability in Labrador, Canada that extends well into the Little Ice Age (LIA; 1646 AD). Barium-to-calcium ratios (Ba/Ca) and carbon isotopes (δ13C) measured in long-lived coralline algae demonstrate significant correlations to both observational and proxy records of sea-ice variability, and show persistent patterns of co-variability broadly consistent with the timing and phasing of the Atlantic Multidecadal Oscillation (AMO). Results indicate reduced productivity in the Subarctic Northwest Atlantic associated with AMO cool phases during the LIA, followed by a step-wise increase from 1910 to present levels—unprecedented in the last 363 years. Increasing phytoplankton productivity is expected to fundamentally alter marine ecosystems as warming and freshening is projected to intensify over the coming century.