• Energy Research
• Closed Access close
• Restricted close
• DE close
• EU close
• Transport Research close

This paper presents an integrated vehicle model to simulate simultaneously the driver, powertrains, chassis, body, road condition, vehicle dynamics and the Active Suspension (AS) system with/without an energy harvesting module. The developed model is used to investigate the ride comfort and influences of energy harvesting AS system on the total energy consumption of battery Electric Vehicles (EVs) relative to EVs with a passive suspension system. Preliminary simulation results show that compared to EVs with a passive suspension system, the ones with AS system improve ride comfort, up to 31% reduction of the vehicle body acceleration RMS value, with an expense of higher energy consumption. This expense can be reduced to about 2.8% when using an energy harvesting AS system. Simulation results also demonstrate that the available energy for recuperation during the AS system operation is significant in relation to the regenerative braking energy of the propulsion system, up to approx. 70% on bumpy road surfaces.

Abstract This paper presents a study of the combined influence of battery models and sizing strategy for hybrid and battery-based electric vehicles. In particular, the aim is to find the number of battery (and supercapacitor) cells to propel a light vehicle to run two different standard driving cycles. Three equivalent circuit models are considered to simulate the battery electrical performance: linear static, non-linear static and non-linear with first-order dynamics. When dimensioning a battery-based vehicle, less complex models may lead to a solution with more battery cells and higher costs. Despite the same tendency, when a hybrid vehicle is taken into account, the influence of the battery models is dependent on the sizing strategy. In this work, two sizing strategies are evaluated: dynamic programming and filter-based. For the latter, the complexity of the battery model has a clear influence on the result of the sizing problem. On the other hand, a modest influence is observed when a dynamic programming strategy is followed.

Estuaries are among the most valuable aquatic systems by their services to human welfare. However, increasing human activities at the watershed along with the pressure of climate change are fostering the co-occurrence of multiple environmental drivers, and warn of potential negative impacts on estuaries resources. At present, no clear understanding of how coastal ecosystems will respond to the non-stationary effect of multiple drivers. Here we analysed the temporal interaction among multiple environmental drivers and their changing priority on shaping phytoplankton response in the Bahía Blanca Estuary, SW Atlantic Ocean. The interaction among environmental drivers and the number of significant direct and indirect effects on chlorophyll concentration increased over time in concurrence with enhanced anthropogenic stress, changing winter climate and wind patterns. Over the period 1978-1993, proximal variables such as nutrients, water temperature and salinity, showed a dominant effect on chlorophyll, whereas in more recent years (1993-2009) climate signals (SAM and ENSO) boosted indirect effects through its influence on precipitation, wind, water temperature and turbidity. Turbidity emerged as the dominant driver of chlorophyll while in recent years acted synergistically with the concentration of dissolved nitrogen. As a result, chlorophyll concentration showed a significant negative trend and a loss of seasonal peaks reflecting a pronounced reorganisation of the phytoplankton community. We stress the need to account for the changing priority of drivers to understand, and eventually forecast, biological responses under projected scenarios of global anthropogenic change.

Available methods for measuring the impact of ocean acidification (OA) and leakage from carbon capture and storage (CCS) on marine sedimentary pH profiles are unsuitable for replicated experimental setups. To overcome this issue, a novel optical sensor application is presented, using off-the-shelf optode technology (MOPP). The application is validated using microprofiling, during a CCS leakage experiment, where the impact and recovery from a high CO2 plume was investigated in two types of natural marine sediment. MOPP offered user-friendliness, speed of data acquisition, robustness to sediment type, and large sediment depth range. This ensemble of characteristics overcomes many of the challenges found with other pH measuring methods, in OA and CCS research. The impact varied greatly between sediment types, depending on baseline pH variability and sediment permeability. Sedimentary pH profile recovery was quick, with profiles close to control conditions 24 h after the cessation of the leak. However, variability of pH within the finer sediment was still apparent 4 days into the recovery phase. Habitat characteristics need therefore to be considered, to truly disentangle high CO2 perturbation impacts on benthic systems. Impacts on natural communities depend not only on the pH gradient caused by perturbation, but also on other processes that outlive the perturbation, adding complexity to recovery.

AbstractResting egg production is considered the most common form of dormancy in aquatic invertebrates. Given that many taxa at least partially terminate resting egg state using environmental cues, knowledge on environmental drivers of hatching success is important, particularly within the context of climate change and environmental degradation. Fairy shrimp (anostracans) are temporary wetland specialists that are reliant on resting egg production for population persistence. Temporary wetlands are common in many arid regions projected to experience increases in temperature, and in areas often compromised by human‐mediated activities. In this study, we assessed the combined effects of light and temperature on the hatching success of Streptocephalus cafer (Anostraca) dormant eggs from temporary wetlands in an arid environment. Both temperature and light altered hatching success, with emergent effects evident. Light caused a significant threefold increase in hatching success overall, while temperature effects were non‐linear, with hatching optimised at 27°C, and especially under light conditions. These results are discussed within the context of shifting climates and disturbances to temporary wetland ecosystems.

AbstractClimate change will not only shift environmental means but will also increase the intensity of extreme events, exerting additional stress on ecosystems. While field observations on the ecological consequences of heat waves are emerging, experimental evidence is rare, and lacking at the community level. Using a novel “near‐natural” outdoor mesocosms approach, this study tested whether marine summer heat waves have detrimental consequences for macrofauna of a temperate coastal community, and whether sequential heat waves provoke an increase or decrease of sensitivity to thermal stress. Three treatments were applied, defined and characterized through a statistical analysis of 15 years of temperature records from the experimental site: (1) no heat wave, (2) two heat waves in June and July followed by a summer heat wave in August and (3) the summer heat wave only. Overall, 50% of the species showed positive, negative or positive/negative responses in either abundance and/or biomass. We highlight four possible ways in which single species responded to either three subsequent heat waves or one summer heat wave: (1) absence of a response (tolerance, 50% of species), (2) negative accumulative effects by three subsequent heat waves (tellinid bivalve), (3) buffering by proceeding heat waves due to acclimation and/or shifts in phenology (spionid polychaete) and (4) an accumulative positive effect by subsequent heat waves (amphipod). The differential responses to single or sequential heat waves at the species level entailed shifts at the community level. Community‐level differences between single and triple heat waves were more pronounced than those between regimes with vs. without heat waves. Detritivory was reduced by the single heat wave while suspension feeding was less common in the triple heat wave regime. Critical extreme events occur already today and will occur more frequently in a changing climate, thus, leading to detrimental impacts on coastal marine systems.

This paper presents a comprehensive and validated inventory of road transport emissions worldwide. The bottom-up calculation correlates within 2% and 10% with fuel sales data in Organisation for Economic Co-operation and Development (OECD) and non-OECD regions, respectively; this adds credibility to the results. The inventory covers eight exhaust compounds emitted by five vehicle categories and five fuel types each. For many non-OECD countries, road transport exhaust emissions have been calculated for the first time at this level of detail. Furthermore, this paper provides a conservative estimate of primary particulate matter emissions from diesel and gasoline vehicles. The Group of Seven countries (Canada, France, Germany, Italy, Japan, the United Kingdom, and the United States) together with Brazil, China, India, Mexico, and Russia account for more than three-quarters of all considered exhaust emissions, followed by major countries in the Middle East and Southeast Asia. Action in these 15 countries could reduce emissions for the whole region significantly. Exhaust control and maintenance can focus on motorized two-wheelers, buses, and heavy-duty trucks. The inventory is particularly suited for comparisons across countries and regions. Data uncertainties in transport volumes and real-world emissions, notably of hydrocarbon and particulate matter, should be reduced.

Electricity from renewable and/or nuclear sources (“carbon–neutral electricity”) can be used for charging plug-in electric vehicles in order to significantly reduce their lifecycle carbon emissions. However, little is known about how carbon–neutral charging services (CNCS) for electric vehicles must be designed to attract consumers’ interest. Therefore, we conducted a survey including an Adaptive Choice-based Conjoint Analysis to investigate private consumers’ awareness and preferences for different service attributes of CNCS, specifically the energy source, regionality of generation, additionality, balancing period, charging flexibility, and price. The online survey in Germany of 510 private consumers who were interested in electric vehicles shows that awareness is highest for the energy source and regionality. Behind price, these are also the second and third most important attributes when choosing a CNCS. Even though, on average, there seems to be a link between the awareness for an attribute, its importance and consumers’ willingness to pay, this link proves to be non-significant for individual respondents. In conclusion, providers of CNCS could prominently advertise the attributes consumers are most aware of (i.e., the energy source and regionality of generation). Explaining the less-known, and therefore deemed unimportant, attributes (i.e., additionality, balancing period, and charging flexibility) to consumers could be difficult and costly for providers. From a system perspective, however, more convincing explanation efforts could lead to an increased use of renewables and enhanced system reliability. This raises the challenge for policymakers to create a framework which is both advantageous for the energy system and attractive to consumers. Government-set standards for charging tariffs may be a viable option.