• Energy Research
• engineering and technology close
• EU close
• ES close
• Transport Research close

Wave power is a potential technology for generating sustainable renewable energy. Several types of wave energy converters (WECs) have been proposed for this purpose. WECs operate in a harsh maritime environment that sets strict limitations on how and when the device can be economically and safely reached for maintenance. Thus, to ensure profitable energy generation over the system life cycle, system reliability is a key aspect to be considered in WEC development. In this article, we describe a reliability analysis approach for WEC development, based on the use of reliability block diagram (RBD) modelling. We apply the approach in a case study involving a submerged oscillating wave surge converter device concept that utilizes hydraulics in its power take-off system. In addition to describing the modelling approach, we discuss the data sources that were used for gathering reliability data for the components used in a novel system concept with very limited historical or experimental data available. This includes considerations of the data quality from various sources. As a result, we present examples of applying the RBD modelling approach in the context of WEC development and discuss the applicability of the approach in supporting the development of new technologies.

Wave energy conversion is a promising field of renewable energy, but it still faces several technological and economic challenges. One of these challenges is to improve the energy efficiency and adaptability of Wave Energy Converters to varying wave conditions. A technological approach to solve this efficiency challenge is the negative spring mechanisms illustrated in recent studies. This paper proposes and analyzes a novel negative spring technological concept that dynamically modifies the mass and inertia of a Wave Energy Converter by transferring seawater between its compartments. The added value of the presented technology relies on interoperability, ease of manufacturing and operating, and increased energy efficiency for heterogeneous sea states. The concept is presented in two analyzed alternatives: a passive one, which requires no electrical consumption and is purely based on the relative motion of the bodies, and an active one, which uses a controlled pump system to force the water transfer. The system is evaluated numerically using widely accepted simulation tools, such as WECSIM, and validated by physical testing in a wave flume using decay and regular test scenarios. Key findings include a relevant discussion about system limitations and a demonstrated increase in the extracted energy efficiency up to 12.7% while limiting the maximum power extraction for a singular wave frequency to 3.41%, indicating an increased adaptability to different wave frequencies because of the amplified range of near-resonance operation of the WEC up to 0.21 rad/s.

AbstractThis paper assesses how parameter uncertainties in the model for rise velocity of CO2 droplets in the ocean cause uncertainties in their rise and dissolution in marine waters. The parameter uncertainties in the rise velocity for both hydrate coated and hydrate free droplets are estimated from experiment data. Thereafter the rise velocity is coupled with a mass transfer model to simulate the fate of dissolution of a single droplet.The assessment shows that parameter uncertainties are highest for large droplets. However, it is also shown that in some circumstances varying the temperature gives significant change in rise distance of droplets.

Zero-emission transportation is currently a public priority, especially in big cities. For this reason, the use of electric vehicles (EVs) is receiving much attention. To facilitate the adoption of EVs, a proper charging infrastructure together with energy management is essential. This article proposes a design guideline for a direct current (DC) charging station with bipolar properties. A bipolar system can convert a two-wire system into three wires in a microgrid system with a neutral line. The configuration of the bipolar system supports different loads; therefore, the unbalanced operation is inherent to the system. The proposed bipolar DC charging station (CS) has a three-level balancing converter that reduces the step-down effort chargers. Moreover, this paper proposes the continuous-control-set model predictive control (CCS-MPC)-based balancing strategy that allows the handling of different output loads while keeping the neutral-line voltage efficiently regulated with improved dynamic performance compared to a traditional controller. Stability and parameter robustness analyses are also performed for the control parameter selection. To ensure the performance of the proposed method, both simulation and experimental results are presented and compared with those obtained from the traditional methods.

This paper investigates the cost-effectiveness of operation strategies which can be used to abate CO 2 emissions in a local multi-energy system. A case study is carried out using data from a real energy system that integrates district heating, district cooling, and electricity networks at Chalmers University of Technology. Operation strategies are developed using a mixed integer linear programming multi-objective optimization model with a short foresight rolling horizon and a year of data. The cost-effectiveness of different strategies is evaluated across different carbon prices. The results provide insights into developing abatement strategies for local multi-energy systems that could be used by utilities, building owners, and authorities. The optimized abatement strategies include: increased usage of biomass boilers, substitution of district heating and absorption chillers with heat pumps, and higher utilization of storage units. The results show that, by utilizing all the strategies, a 20.8% emission reduction can be achieved with a 2.2% cost increase for the campus area. The emission abatement cost of all strategies is 36.6–100.2 (€/tCO 2 ), which is aligned with estimated carbon prices if the Paris agreement target is to be achieved. It is higher, however, than average European Emission Trading System prices and Sweden’s carbon tax in 2019.

Currently, traffic intensity in large cities and their surroundings constitute the main unsustainability factor associated with urban transport, leading to significant traffic speed reduction due to high levels of congestion. Road pricing seems to be a measure of transport policy capable of improving efficiency and sustainability in urban transport, reducing traffic intensity and increasing traffic speed, as reflected in the main road pricing indicators currently in operation (Singapore, London, Stockholm, Milan…). Based on the data obtained through a mobility survey applied to a theoretical design of road pricing for the city of Madrid, we developed a traffic speed forecast model using time series analysis, to which we applied the mobility survey results. The research results show that theoretical urban road pricing could imply very significant positive effects in traffic speed increase and congestion reduction, fundamentally in the city center and metropolitan crown, as well as demonstrating positive effects in the improvement of traffic speed in those municipalities furthest from the urban center. Moreover, our findings reveal that road pricing would allow an average traffic speed increase in the protected area of the city center during the operating hours of between 10% and 32.5%: 15.9% in the metropolitan crown, 10% in M-30, and 32.5% in the case of Madrid’s city center.