• Energy Research
• ES close
• Energies close
• Transport Research close

According to the Canarian government’s plans, a complete decarbonization of the Canary Islands economy is foreseen from 2040 onwards, which includes the electrification of land transport in the archipelago. However, due to the current low penetration rate of electric vehicles (EVs) on the islands, the number of EVs in circulation is expected to grow significantly in the coming years. Despite this, the network of charging points in Tenerife is currently totally insufficient, which is why it is essential to carry out a study to design the network of charging points in such a way that it can absorb the entire fleet of EVs that is expected to be in place by 2040. To this end, there are studies on the capacity, in terms of parking space, available for the installation of these charging points, but to date there are no studies on this subject supported by mobility data. For this reason, a simulation of traffic in Tenerife in 2040 has been carried out using MATSim (Multi-Agent Transport Simulation) to determine the ideal places to install these charging points and to find the number of charging points needed for the network.

Current logistics and transportation (L&T) systems include heterogeneous fleets consisting of common internal combustion engine vehicles as well as other types of vehicles using “green” technologies, e.g., plug-in hybrid electric vehicles and electric vehicles (EVs). However, the incorporation of EVs in L&T activities also raise some additional challenges from the strategic, planning, and operational perspectives. For instance, smart cities are required to provide recharge stations for electric-based vehicles, meaning that investment decisions need to be made about the number, location, and capacity of these stations. Similarly, the limited driving-range capabilities of EVs, which are restricted by the amount of electricity stored in their batteries, impose non-trivial additional constraints when designing efficient distribution routes. Accordingly, this paper identifies and reviews several open research challenges related to the introduction of EVs in L&T activities, including: (a) environmental-related issues; and (b) strategic, planning and operational issues associated with “standard” EVs and with hydrogen-based EVs. The paper also analyzes how the introduction of EVs in L&T systems generates new variants of the well-known Vehicle Routing Problem, one of the most studied optimization problems in the L&T field, and proposes the use of metaheuristics and simheuristics as the most efficient way to deal with these complex optimization problems.

A high-speed train (HST) is a single-phase load supplied by a three-phase AC grid. The HST produces unbalanced three-line currents affecting the power quality of the grid. To balance the asymmetries on average, railway feeding sections are supplied that rotate the three phases of the grid. An electric isolation segment, called the neutral section (NS), between different sections is necessary. The HST must pass through this 1.6 km NS without power supply. In this paper, a medium-voltage AC static switch solution to feed the high-speed train in the NS is proposed. Thyristor technology is selected to design the 25 KVAC static switch. A medium-voltage power electronics procedure design is proposed to ensure proper operation in the final application. An NS operation is analyzed to identify impacts within the electric system and solution requirements are developed. Then, a low-scale prototype is used to experimentally validate the solution based on thyristor technology and the medium-voltage AC static switch is designed. Limitations on power and voltage at the Mondragon University Medium-Voltage Laboratory do not allow testing of the AC static switch at nominal conditions. A partial test procedure to test sections of the AC static switch is proposed and applied to validate the solution. Finally, experimental results for the Cordoba–Malaga (Spain) high-speed railway in real conditions with an HST crossing the NS at 300 km/h are shown.

Electric vehicles (EVs) and photovoltaic (PV) systems have been progressively incorporated into the grid in recent years principally due to two factors: reduced energy costs and lower pollutants. Numerous studies have investigated how integrating PV and EVs into the grid may affect specific people. It is crucial to understand that the electricity grid will experience the combined effects of PV–EV integration as PV and EV penetration increases. The primary motivation for PV’s integration with Vehicle-to-Grid (V2G) and Grid-to-Vehicle (G2V) services is the aim to reduce charging costs from discharging; moreover, another prerequisite must be satisfied before PV arrays will be able to provide V2G services. The range between the driving limit and EV battery degradation should be reasonable. The way EVs charge and discharge will be impacted by these factors. Numerous analyses are required in order to control the power between various source and load scenarios. In order to balance grids and manage frequency, controllers such as Improved Particle Swarm Optimization (IPSO), Improved Ant Colony Optimization (IACO), and Improved Mayfly Optimization (IMO) are used. As a result, V2G/G2V helps feed electricity back into the grid. By providing the proper duty cycle ratio, the proposed controller regulates converter switching. This study allowed for the performance analysis and operation simulation of a grid-connected PV/EV/Grid system. The purpose of this system was to maximize PV self-consumption while maintaining power quality characteristics like harmonics, grid voltage/current, and power factor.

It is a fact that electric vehicles (EVs) are beneficial for climate protection. However, the current challenge is to decide on whether to reuse an EV battery or to recycle it after its first use. This paper theoretically investigates these areas i.e., recycle and reuse. It was found that there are several commercially used recycling processes and also some are under research to regain maximum possible materials and quantity. The concept of reusing (second life) of the battery is promising because, at the end of the first life, batteries from EVs can be used in several applications such as storing energy generated from renewable sources to support the government grid. However, the cost and life-cycle analysis (LCA) demonstrated that there are several aspects involved in battery reuse applications. Henceforth, one LCA generalised method cannot provide an optimal approach for all cases. It is important to have a detailed study on each of the battery reusing applications. Until then, it is safe to say that reusing the battery is a good option as it would give some time to recycling companies to develop cost and energy-efficient methods.

The use of renewable energies, energy saving, and efficiency are needs of global society. According to the latest estimates, global energy demand could triple by 2050 and, by then, 70% of the world’s population will live in cities. Cities are currently responsible for 80% of greenhouse gas emissions, so they have a key role to play in shifting towards a sustainable energy future. Cities are threatened not only by overcrowding, but also by rising energy demand, obsolete infrastructure, volatile energy markets, and the effects of climate change. This Special Issue aims to advance the contribution of energy saving and the use of renewable energies in order to achieve more sustainable cities.