• Energy Research
• engineering and technology close
• PK close
• Energy Research close

Owing to the growing interest of bioconvection flow of nanomaterials, many investigations on this topic have been performed, especially in this decade. The bioconvection flow of nanofluid includes some novel significance in era of biotechnology and bio-engineering like bio-fuels, microbial enhanced oil recovery, enzymes, pharmaceutical applications, petroleum engineering, etc. The current analysis aims to explore the various thermal properties of Sutterby nanofluid over rotating and stretchable disks with external consequences of variable thermal conductivity, heat absorption/generation consequences, activation energy and thermal radiation. The considered flow problem is changed into dimensionless form with convenient variables. The numerical structure for the obtained non-dimensional equations is numerically accessed with built-in shooting technique. The consequences of various physical parameters are observed for enhancement of velocity, temperature, concentration and motile microorganism. It is noted that both axial and tangential velocity components decrease with Reynolds number and buoyancy ratio parameter. The nanofluid concentration improves with activation energy and concentration Biot number. Moreover, an improved microorganisms profile is noticed with microorganism Biot number and bioconvection Rayleigh number.

Abstract The variation of properties with temperature have many practical applications in the area of chemical engineering and metallurgy, in the process of extrusion, the materials moving between a feed roll and on carrier belt. Here our intention is to explore the consequences of temperature dependent viscosity and variable thermal conductivity on flow of nanoliquid in a rotating system. Fluid between parallel plates is taken. Energy expression incorporates the exponential heat source. This analysis also explores the attributes of modified Arrhenius energy function with chemical reaction. Boundary layer problems have been computed via NDSolve approach. The obtained solutions are sketched for various estimations of embedded variables of interest. Results pointed out that both axial and transverse velocities show decaying behavior for higher rotation parameter. Thermal field boosts up with an enhancement of thermophoretic and space dependent heat source variables. Moreover the rate of mass transport decays through dimensionless activation energy.

AbstractThe present studies report the use of an ecofriendly biomass Ficus religiosa in untreated (UFR) and xanthate treated (XFR) forms for the Cd (II) ions removal in a fixed bed column. FTIR, SEM‐EDS, BET surface area, and elemental analysis (CHNS) techniques were used to characterize the biosorbents. The acquired data supported FTIR findings regarding the nature of functional groups present in the materials. Packed bed continuous flow studies explored the effects of various parameters such as Cd (II) ion concentration (100 mg/L–300 mg/L), bed heights (5 cm–30 cm), pH (3–5), at a constant linear flow rate (~1.13 cm/min). The obtained S‐shaped breakthrough curves indicated the efficiency of the packed bed for the Cd (II) removal. Breakthrough time and exhaust times increased (67.5 min–390 min and 292.5 min–1852.5 min) (97.5 min–442.5 min and 345 min–1920 min) for unmodified and modified respectively with bed heights. The BDST, Thomas, and Yoon‐Nelson models were used to evaluate the experimental results. The Yoon‐Nelson model describes the breakthrough data more efficiently compared to other models. Under similar conditions, the modified material exhibited 400% increased capacity (55.20 mg/g) than that of unmodified material (13.33 mg/g). Thus, xanthate modification significantly enhanced the capacity for Cd (II) ions from aqueous solutions.Practitioner Points Xanthate modification of Ficus religiosa is an environmentally friendly process. Modified and unmodified materials were utilized for Cd (II) removal in fixed bed column process which is industrially viable process. Low inlet Cd (II) concentration at pH 5 and higher bed height favored the continuous flow process at fixed flow rate. Modification caused an increase of about 400% in the capacity of material.

Abstract Liquefaction of poly-isoprene based rubber (PIR) was performed using ethanol as a solvent for the production of liquid fuel and chemicals. An autoclave batch reactor was used to perform the ethanolysis of PIR at different temperature ranges (250–375 °C), with different ethanol to PIR ratio (0.5:1 to 4:1), and at different reaction times (15–75mins). The experimental results showed that a maximum yield of 86 wt % was achieved at temperature of 325 °C, ethanol to PIR ratio 1/1, and reaction time of 30 min. This liquid oil yield is about 14% higher than the yield obtained from the pyrolysis of PIR at 500 °C and about 10% higher than the yield obtained from hydrothermal liquefaction of PIR at 375 °C. Moreover, the utilization of ethanol in the process was also incorporated and product yields were redefined. Furthermore, ethanol contributed to enhance the quality of liquid-oil, particularly in term of viscosity, acidity, and energy density. Furthermore, the FTIR analysis showed methyl and methylene were most dominating functional groups found in the liquid product and GCMS analysis identified that they were presented by alkenes, aromatics, and alkyls.

Most of the existed works on the radio resource allocation (RRA) problem commonly assume the channel-state information (CSI) can be perfectly obtained by the transmission source. However, such assumption is not practical in the realistic wireless systems. In this work, we consider the practical implementation issues of resource allocation in orthogonal frequency division multiple access (OFDMA) two-way relay networks: the inaccuracy of channel-state information (CSI) available to the source. Instead, only the estimated channel status is known by the source. In this context, a joint optimization of subcarrier pairing and allocation, relay selection, and transmit power allocation is formulated in OFDMA two-way amplify-and-forward relay networks. Moreover, the objective of this work is to minimize the energy consumption of the overall system. Further, to ensure the quality of service (QoS) or data rate requirement, the energy consumption must be minimized without compromising the QoS. Therefore, by applying convex optimization techniques, energy-efficient algorithms are developed with the objective to minimize the total transmit power with guaranteeing the required data rates. Through simulation studies, energy consumption performance of the systems under the proposed schemes is investigated. It can be observed that our proposed scheme can improve the energy consumption performance of the considered system.

This paper describes the enhancement of power system stability using the application of Lyapunov stability theory. It is proved that system becomes more stable with the inclusion of additional controls in the model. Method of mathematical manipulation is used. For the system modeled, Lyapunov type energy functions and their derivatives are derived to determine stability status of the system. First, without controlling elements and then with the inclusion of the models of controlling elements like power system stabilizer and speed governor system.

This study aimed to realize Sustainable Development Goals (SDGs), i.e., no poverty, zero hunger, and sustainable cities and communities through the implementation of an intelligent cattle-monitoring system to enhance dairy production. Livestock industries in developing countries lack the technology that can directly impact meat and dairy products, where human resources are a major factor. This study proposed a novel, cost-effective, smart dairy-monitoring system by implementing intelligent wireless sensor nodes, the Internet of Things (IoT), and a Node-Micro controller Unit (Node-MCU). The proposed system comprises three modules, including an intelligent environmental parameter regularization system, a cow collar (equipped with a temperature sensor, a GPS module to locate the animal, and a stethoscope to update the heart rate), and an automatic water-filling unit for drinking water. Furthermore, a novel IoT-based front end has been developed to take data from prescribed modules and maintain a separate database for further analysis. The presented Wireless Sensor Nodes (WSNs) can intelligently determine the case of any instability in environmental parameters. Moreover, the cow collar is designed to obtain precise values of the temperature, heart rate, and accurate location of the animal. Additionally, auto-notification to the concerned party is a valuable addition developed in the cow collar design. It employed a plug-and-play design to provide ease in implementation. Moreover, automation reduces human intervention, hence labor costs are decreased when a farm has hundreds of animals. The proposed system also increases the production of dairy and meat products by improving animal health via the regularization of the environment and automated food and watering. The current study represents a comprehensive comparative analysis of the proposed implementation with the existing systems that validate the novelty of this work. This implementation can be further stretched for other applications, i.e., smart monitoring of zoo animals and poultry.

Closed-loop supply chain networks are gaining research popularity due to environmental, economic and social concerns. Such networks are primarily designed to overcome carbon footprints and to retrieve end of life products from customers. This study considers a multi echelon closed-loop supply chain in the presence of machine disruption. A multi-objective model is presented to optimize the total cost, the total time and emissions in a closed-loop supply chain network. The aim is to analyze the trade-off between the objectives of cost, time, and emissions and how these decisions are impacted by the selection of different available machines. A number of solution approaches are tested on a case study from the tire industry. The results suggest the improved performance of the hybrid heuristic and the importance of controlling disruption in a closed-loop supply chain network. Furthermore, there is a trade-off between the different objective functions which can help the decision maker to choose a particular solution according to the preference of an organization. Finally, conclusion and future research avenues are provided.