• Energy Research
• Energy Research close
• Indian Institutes of Technology close

Abstract The reverse flat-plate collector is a non-concentrating collector. It can collect solar heat at high temperatures which cannot be achieved by conventional non-concentrating collectors. In this paper, the authors have proposed a number of modified versions of the originally proposed reverse flat-plate collector. The new designs are of single, as well as double, absorber type. The thermal performance of these modified reverse flat-plate collectors is compared with that of a single absorber reverse flat-plate collector, as well as with the corresponding normal flat-plate collector. It is found that the new design having two absorbers gives the best thermal performance as compared with other configurations. The analytical models presented in this paper very well describe the experimental results.

Drying experiments have been performed with potato cylinders and slices using a laboratory scale designed natural convection mixed-mode solar dryer. The drying data were fitted to eight different mathematical models to predict the drying kinetics, and the validity of these models were evaluated statistically through coefficient of determination (R(2)), root mean square error (RMSE) and reduced chi-square (χ (2)). The present investigation showed that amongst all the mathematical models studied, the Modified Page model was in good agreement with the experimental drying data for both potato cylinders and slices. A mathematical framework has been proposed to estimate the performance of the food dryer in terms of net CO2 emissions mitigation potential along with unit cost of CO2 mitigation arising because of replacement of different fossil fuels by renewable solar energy. For each fossil fuel replaced, the gross annual amount of CO2 as well as net amount of annual CO2 emissions mitigation potential considering CO2 emissions embodied in the manufacture of mixed-mode solar dryer has been estimated. The CO2 mitigation potential and amount of fossil fuels saved while drying potato samples were found to be the maximum for coal followed by light diesel oil and natural gas. It was inferred from the present study that by the year 2020, 23 % of CO2 emissions can be mitigated by the use of mixed-mode solar dryer for drying of agricultural products.

Abstract Gold nanoparticles (Au-NPs) seeded plasmonic nanofluids (PNFs) have shown promising results in overall performance enhancement of direct absorption solar collector (DASC) due to localized surface plasmon resonance (LSPR) effect. For the work presented here, Au-NPs were synthesized by the wet chemical method and were utilized to prepare plasmonic nanofluid. The surface plasmon resonance peak of Au-NPs was observed at 531 nm using UV–Visible spectrophotometer study. The testing for performance enhancement of gold plasmonic nanofluid (GPNF) laden DASC so far is limited to laboratory scale setups or simulation studies. Considering the dearth of outdoor experimental studies, an attempt has been made in the present study to evaluate the thermal performance of Au-NPs (∼40 nm) based nanofluid (∼0.0002 wt%) in full scale DASC. The experiments have been performed at different flow rates under clear sky outdoor conditions in winter season at Jalandhar, India. The maximum collector outlet temperature was measured to be 55 °C with GPNF which is about 7 °C higher than the maximum outlet temperature obtained with de-ionized water as working fluid. Thermal efficiency with GPNF is about 33% higher than de-ionized water at the optimal flow rate of 0.030 kg/s.

Energy conservation potential of the evaporative roof cooling technique for a cinema house in a composite climate (characterized by Delhi) has been evaluated. Thermal loads due to heat conduction through the building envelope, the required ventilation and the occupants have been taken into account. Life-cycle-cost analysis has been employed to evaluate the cost effectiveness of this energy conservation technique. It is seen that evaporative cooling on the roof leads to a net saving of 14% in the initial investment and 17% in the annual cost.

Abstract It is usual to extract hot water from a storage tank, using displacement by cold water from the mains; this causes the temperature of the outgoing hot water to decrease with time. In order to alleviate this undesirable feature a number of tanks in series may be employed. In this communication the effect of number of tanks on the outlet temperature of hot water, has been analytically investigated; it has been assumed that the only heat exchange, taking place in the tanks is on account of flow of water. The considerations in this analysis are similar to those made by Rabinovich and Fert [1] and Rabinovich [2], for a system of tanks in a solar collector loop without any outflow of water. Thus the analysis is best applicable when hot water is extracted at a fast rate, so that the gain or loss of heat by other mechanisms is negligible, compared to that due to the flow of water. The analysis should also be applicable to shallow solar ponds, Sodha et al. [3], and built in storage water heaters, Sodha et al. [4].

Abstract This paper presents an experimental investigation of a prototype rock bed solar collector. This collector consists of rocks in a galvanized iron box; the rocks are painted dull black and suitably glazed. The heat can be extracted by forced air convection. This system can act as a storage system, as well, when suitably constructed. The heat decay characteristic of the bed is also studied. A preliminary economic analysis of this air heater is presented.

Abstract In this work, we investigate the radial flow structure in gas–solids downer using Euler–Euler computational fluid dynamics (CFD) models. Solids are modeled as pseudo-fluid using kinetic theory of granular flow. In addition to the mass and momentum conservation equations, transport equation for fluctuating kinetic energy of the solids (modeled as granular temperature) is solved. The main focus of this work is the systematic investigation of the most suitable closures for the various force interactions in the system of interest. Results are presented for mean solids velocity, volume fraction, granular temperature and slip velocities for various closure forms. Sensitivity of the predicted results to the choice of closure forms is presented. Finally we emphasize the idea of matching slip velocities and the trends thereof with solids fraction as the key to developing a robust CFD model which has predictive capability over a wide variety of flow conditions.

Abstract A simple transient analytical approach has been adopted for developing an explicit expression for the water temperature of an indoor swimmingpool coupled to a panel of collectors. For qualitative assessment of the analytical results, computations have been made for the winter climatic conditions of Sri Nagar, India. The effects of several parameters, viz. inlet temperature, heat removal factors, collector, etc. on the performance of the proposed systems have been studied in detail. It is observed that (i) the proposed model agrees with the experimental results of the Australian passive solar swimming pool and (ii) the desired temperature for the indoor swimming pool can be achieved by the active method.

Abstract State space modelling and synthesis of decentralized suboptimal load-frequency control for hydro-thermal power systems are described in this paper. The state space models are derived by the partial fraction technique for reheat steam turbines, hydro turbines and hydro governors having numerator dynamics. Decentralized suboptimal load-frequency controls are synthesized by using the method of minimum error excitation and their performance is analysed as a function of tie-line power level. It is shown that the suboptimal control with feedback of some, but not all, of the remote area state variables is a feasible alternative to the optimal control, whereas local control without feedback of any remote state variable is inadequate for stabilizing the system.