• Energy Research
• 7. Clean energy close
• EU close
• GB close
• IT close
• European Marine Science close

1. Tidal stream energy converters (turbines) are currently being installed in tidally energetic coastal sites. However, there is currently a high level of uncertainty surrounding the potential environmental impacts on marine mammals. This is a key consenting risk to commercial introduction of tidal energy technology. Concerns derive primarily from the potential for injury to marine mammals through collisions with moving components of turbines. To understand the nature of this risk, information on how animals respond to tidal turbines is urgently required. 2. We measured the behaviour of harbour seals in response to acoustic playbacks of simulated tidal turbine sound within a narrow coastal channel subject to strong, tidally induced currents. This was carried out using data from animal-borne GPS tags and shore-based observations, which were analysed to quantify behavioural responses to the turbine sound. 3. Results showed that the playback state (silent control or turbine signal) was not a significant predictor of the overall number of seals sighted within the channel. 4. However, there was a localised impact of the turbine signal; tagged harbour seals exhibited significant spatial avoidance of the sound which resulted in a reduction in the usage by seals of between 11 and 41% at the playback location. The significant decline in usage extended to 500 m from the playback location at which usage decreased by between 1 and 9% during playback. 5. Synthesis and applications: This study provides important information for policy makers looking to assess the potential impacts of tidal turbines and advise on development of the tidal energy industry. Results showing that seals avoid tidal turbine sound suggest that a proportion of seals encountering tidal turbines will exhibit behavioural responses resulting in avoidance of physical injury; in practice, the empirical changes in usage can be used directly as avoidance rates when using collision risk models to predict the effects of tidal turbines on seals. There is now a clear need to measure how marine mammals behave in response to actual operating tidal turbines in the long term to learn whether marine mammals and tidal turbines can co-exist safely at the scales currently envisaged for the industry. JApEcol_Hastie_etal_observation_data_DryadLand based observer data (.xlsx) used in the analysis of seal responses to tidal turbine sounds. This is effectively counts of seals observed in the water during acoustic playbacks of tidal turbine sound and silent controls. Data were collected by a series of observers located on a clifftop overlooking the study area (Kyle Rhea, Isle of Skye, Scotland) README file is provided as a tab in the file.JApEcol_Hastie_etal_seal_telemetry_data_DryadHarbour seal telemetry data (.xlsx) used in the analysis of changes in usage with distance from the location of playbacks of tidal turbine sound. The data are regularised lat-lon locations from 10 individual harbour seals tagged with GPS telemetry devices. README is provided as a tab in the file.STIMweighted_J11_1hour_withRampSound file (.wav) used during playbacks of simulated tidal turbine sound to harbour seals to investigate avoidance responses. The file has a 10 second ramp at the start and end of the file, and is frequency weighted for use with a J11 underwater speaker.

Project: GCOS Earth Heat Inventory - A study under the Global Climate Observing System (GCOS) concerted international effort to update the Earth heat inventory (EHI), and presents an updated international assessment of ocean warming estimates, and new and updated estimates of heat gain in the atmosphere, cryosphere and land over the period from 1960 to present. Summary: The file “GCOS_EHI_1960-2020_Earth_Heat_Inventory_Ocean_Heat_Content_data.nc” contains a consistent long-term Earth system heat inventory over the period 1960-2020. Human-induced atmospheric composition changes cause a radiative imbalance at the top-of-atmosphere which is driving global warming. Understanding the heat gain of the Earth system from this accumulated heat – and particularly how much and where the heat is distributed in the Earth system - is fundamental to understanding how this affects warming oceans, atmosphere and land, rising temperatures and sea level, and loss of grounded and floating ice, which are fundamental concerns for society. This dataset is based on a study under the Global Climate Observing System (GCOS) concerted international effort to update the Earth heat inventory published in von Schuckmann et al. (2020), and presents an updated international assessment of ocean warming estimates, and new and updated estimates of heat gain in the atmosphere, cryosphere and land over the period 1960-2020. The dataset also contains estimates for global ocean heat content over 1960-2020 for different depth layers, i.e., 0-300m, 0-700m, 700-2000m, 0-2000m, 2000-bottom, which are described in von Schuckmann et al. (2022). This version includes an update of heat storage of global ocean heat content, where one additional product (Li et al., 2022) had been included to the initial estimate. The Earth heat inventory had been updated accordingly, considering also the update for continental heat content (Cuesta-Valero et al., 2023).

Quantitative reliability, availability, and maintainability (RAM) assessments are of fundamental importance at the early design stages, as well as planning and operation of marine renewable energy systems. This paper presents an RAM framework adaptable to different offshore renewable technologies, conceived to provide support in the choice of the device components and subsequent planning of the O&M strategies. A case study, characterizing a pilot farm of oscillating water column (OWC) wave energy converters (WECs), is illustrated together with the method used to obtain reliable estimate of its key performance indicators (KPIs). Based on a fixed feed-in-tariff for the project, economic figures are estimated, showing a direct relationship with the availability of the farm and the cost of maintenance interventions. Consequently, the probability distributions of the most relevant output variables are presented, and the mutual correlations between them investigated using principal components analysis (PCA) with the aim of discovering the relationships influencing the performance of the offshore farm. In this way, the contributions of the individual factors on the profitability of the project are quantified, and generic guidelines to support the decision-making process are derived. It is shown how this type of analysis provides important insights not only to ocean energy farm operators after the deployment of the devices, but also to device developers at the early design stage of wave energy concepts.

The marine environment has been in the spotlight of economic development due to the growing demand for areas to promote activities associated with the concept of Blue Economy. This is the case of the renewable energy and aquaculture sectors, whose expansion towards offshore is determined by the increase global demand for energy and food, and by exceeding of the carrying capacity of coastal and terrestrial systems. In this context, the multi-use strategy can be an alternative to minimize conflicts between activities and impacts on the surrounding social-ecological environment. This contribution presents a preliminary approach to identify opportunities for individual exploitation and the possibilities of multi-use between wind energy, wave energy and aquaculture in Brazil?s Exclusive Economic Zone. Technical, operational, and biological aspects were evaluated, through a Suitability Index validated in previous works, to identify zones with favorable conditions for energy exploitation and farming of six fish species. Additionally, overlaps between conservation areas and multi-use zones were considered to analyze possible spatial conflicts. Zones with multi-use possibilities with different combinations between these sectors were identified: i) wave energy and aquaculture presented the largest areas for multi-use, distributed in the south, southeast and northeast; ii) possibility of combining wind energy and aquaculture was identified in the northeast; and iii) multi-use possibilities in the south for marine energies. Zones with multi-use possibilities were identified in protection and conservation areas, such as the combination of wave exploitation and Greater Amberjack farming, with 63% overlap. Therefore, this case study is a guide for future local studies in the marine region of Brazil, mainly in the selection of sites for analysis. The present contribution represents a starting point for the discussion about multi-use in the country C.V.C. Weiss is grateful to the Brazilian National Council for Scientific and Technological Development (CNPq) for the PDJ (Pós-doutorado Junior) fellowship granted (151228/2020–5), and the financial support from the Universidad de Cantabria (UC) through the Agusto González de Linares and Margarita Salas Grants (POS-UC-2019-06 and RMS-04, respectively). J. Bonetti is a Research Fellow of CNPq (Grant 306633/2019–1). Raúl Guanche acknowledges the Grant RYC-2017-23260 funded by MCIN/AEI/10.13039/501100011033 and “ESF Investing in your future”. This work is framed in the project “ACUFLOT”, supported by the Biodiversity Foundation of the Ecological Transition and Demographic Challenge Ministry of Spain and the IHCantabria - Instituto de Hidráulica Ambiental de la Universidad de Cantabria

The biotechnological development has traditionally focused on the compliance with regulatory demands rather than optimising the processes or analysing their sustainability. This work proposes the combination of available tools for the comprehensive sustainability assessment of a blue biotechnology process based on the cultivation of the microalgae Haematococcus pluvialis. The work aims to include environmental, economic and social dimensions to measure the sustainability of the production of a carotenoid with potential applications in food, nutraceutical, cosmetics and eventually pharmaceutical industries. Electricity for cultivation was identified as the major contributor to the environmental impacts, which depended significantly on the production scale. Social benefits were mainly related to workers and consumers, while the economic assessment suggested a profitable process with a relatively short period to recover the initial investment.

A “Well-to-Propeller” Life Cycle Assessment of maritime transport was performed with a European geographical focus. Four typical types of vessels with specific operational profiles were assessed: a container vessel and a tanker (both with 2-stroke engines), a passenger roll-on/roll-off (Ro-Pax) and a cruise vessel (both with 4-stroke engines). All main engines were dual fuel operated with Heavy Fuel Oil (HFO) or Liquefied Natural Gas (LNG). Alternative onshore and offshore fuel supply chains were considered. Primary energy use and greenhouse gas emissions were assessed. Raw material extraction was found to be the most impactful life cycle stage (~90% of total energy use). Regarding greenhouse gases, liquefaction was the key issue. When transitioning from HFO to LNG, the systems were mainly influenced by a reduction in cargo capacity due to bunkering requirements and methane slip, which depends on the fuel supply chain (onshore has 64% more slip than offshore) and the engine type (4-stroke engines have 20% more slip than 2-stroke engines). The combination of alternative fuel supply chains and specific operational profiles allowed for a complete system assessment. The results demonstrated that multiple opposing drivers affect the environmental performance of maritime transport, a useful insight towards establishing emission abatement strategies.

A priority of the industrial applications of microalgae is the reduction of production costs while maximizing algae biomass productivity. The purpose of this study was to carry out a comprehensive evaluation of the effects of pH control on the production of Nannochloropsis gaditana in tubular photobioreactors under external conditions while considering the environmental, biological, and operational parameters of the process. Experiments were carried out in 3.0 m3 tubular photobioreactors under outdoor conditions. The pH values evaluated were 6.0, 7.0, 8.0, 9.0, and 10.0, which were controlled by injecting pure CO2 on-demand. The results have shown that the ideal pH for microalgal growth was 8.0, with higher values of biomass productivity (Pb) (0.16 g L-1 d-1), and CO2 use efficiency ([Formula: see text]) (74.6% w w-1); [Formula: see text]/biomass value obtained at this pH (2.42 [Formula: see text] gbiomass-1) was close to the theoretical value, indicating an adequate CO2 supply. At this pH, the system was more stable and required a lower number of CO2 injections than the other treatments. At pH 6.0, there was a decrease in the Pb and [Formula: see text]; cultures at pH 10.0 exhibited a lower Pb and photosynthetic efficiency as well. These results imply that controlling the pH at an optimum value allows higher CO2 conversions in biomass to be achieved and contributes to the reduction in costs of the microalgae production process.