• Energy Research
• 13. Climate action close
• CN close
• GB close
• AU close
• Applied Energy close

Abstract In an effort to minimise electricity consumption and greenhouse gases emissions, the heating, ventilation and air-conditioning sector has focused its attention on developing alternative solutions to electrically-driven vapour-compression cooling. Liquid desiccant air-conditioning systems represent an energy-efficient and more environmentally friendly alternative technology for dehumidification and cooling, particularly in those cases with high latent loads to maintain indoor air quality and comfort conditions. This technology is considered particularly efficient in hot and humid climates. As a matter of fact, the choice of the desiccant solution influences the overall performance of the system. The current paper reviews the working principle of liquid desiccant systems, focusing on the thermodynamic properties of the desiccant solutions and describes an evaluation of the reference thermodynamic properties of different desiccant solutions to identify which thermodynamic, physical, transport property influences the liquid desiccant process and to what extent. The comparison of these thermodynamic properties for the commonly used desiccants is conducted to estimate which fluid could perform most favourably in the system. The economic factors and the effect of different applications and climatic conditions on the system performance are also described. The paper is intended to be the first step in the evaluation of alternative desiccant fluids able to overcome the problems related to the use of the common desiccant solutions, such as crystallization and corrosion to metals. Ionic liquids seem a promising alternative working fluid in liquid desiccant air-conditioning systems and their characteristics and cost are discussed.

Abstract Urban planners, local authorities, and energy policymakers often develop strategic sustainable energy plans for the urban building stock in order to minimize overall energy consumption and emissions. Planning at such scales could be informed by building stock modeling using existing building data and Geographic Information System-based mapping. However, implementing these processes involves several issues, namely, data availability, data inconsistency, data scalability, data integration, geocoding, and data privacy. This research addresses the aforementioned information challenges by proposing a generalized integrated methodology that implements bottom-up, data-driven, and spatial modeling approaches for multi-scale Geographic Information System mapping of building energy modeling. This study uses the Irish building stock to map building energy performance at multiple scales. The generalized data-driven methodology uses approximately 650,000 Irish Energy Performance Certificates buildings data to predict more than 2 million buildings’ energy performance. In this case, the approach delivers a prediction accuracy of 88% using deep learning algorithms. These prediction results are then used for spatial modeling at multiple scales from the individual building level to a national level. Furthermore, these maps are coupled with available spatial resources (social, economic, or environmental data) for energy planning, analysis, and support decision-making. The modeling results identify clusters of buildings that have a significant potential for energy savings within any specific region. Geographic Information System-based modeling aids stakeholders in identifying priority areas for implementing energy efficiency measures. Furthermore, the stakeholders could target local communities for retrofit campaigns, which would enhance the implementation of sustainable energy policy decisions.

Efficient integration of solar energy into the electricity mix depends on a reliable anticipation of its intermittency. A promising approach to forecast the temporal variability of solar irradiance resulting from the cloud cover dynamics is based on the analysis of sequences of ground-taken sky images or satellite observations. Despite encouraging results, a recurrent limitation of existing deep learning approaches lies in the ubiquitous tendency of reacting to past observations rather than actively anticipating future events. This leads to a frequent temporal lag and limited ability to predict sudden events. To address this challenge, we introduce ECLIPSE, a spatio-temporal neural network architecture that models cloud motion from sky images to not only predict future irradiance levels and associated uncertainties, but also segmented images, which provide richer information on the local irradiance map. We show that ECLIPSE anticipates critical events and reduces temporal delay while generating visually realistic futures. The model characteristics and properties are investigated with an ablation study and a comparative study on the benefits and different ways to integrate auxiliary data into the modelling. The model predictions are also interpreted through an analysis of the principal spatio-temporal components learned during network training. Manuscript accepted for publication in Applied Energy

Abstract In the past, most studies considered solar as a drawback to road pavement, especially the asphalt pavement. Not only its radiation causes the asphalt aging, simultaneously with high temperature, asphalt pavement contributes to the urban heat island (UHI) effect. In recent, as the world becomes more supportive towards implementing sustainable energy as the alternatives to the scarcity of non-renewable resources, utilizing the abundant solar radiation as the main source of energy has gradually attracted attention from both industries and academia with its potentials, including solar application on roads. Nevertheless, more researches have focused on the potential energy collection with less consideration to simultaneously overcome the side effects of abundant solar radiation on its lifecycle. This study found the necessity to review a comprehensive correlation between solar radiation and asphalt pavement from both positive and negative effects. The negative effects included asphalt aging and its effects on surroundings i.e. UHI effect. Meanwhile, the positive effects included exhaust purification and solar energy conversion into other forms of energy that can be used by humans using pavement solar heat collection for winter snowmelt, thermoelectric technology and photoelectric technology to convert solar energy into electrical energy. The cases in various application scenarios were analysed and summarized and the existing problems in the current research were proposed in this paper. Also, the reflection on the transformation of road design concept from “avoiding harm” to “seeking profit” was included. Finally, a new concept of “solar-road harmonious symbiosis” for future road application was proposed based on a comprehensive review of previous published works. It is also the new suggestion to scholars on the treatment of solar diseases on roads to prolong its symbiosis functions.

Abstract The present work focuses on the numerical simulation of Moderate or Intense Low oxygen Dilution combustion condition, using the Partially-Stirred Reactor model for turbulence-chemistry interactions. The Partially-Stirred Reactor model assumes that reactions are confined in a specific region of the computational cell, whose mass fraction depends both on the mixing and the chemical time scales. Therefore, the appropriate choice of mixing and chemical time scales becomes crucial to ensure the accuracy of the numerical simulation prediction. Results show that the most appropriate choice for mixing time scale in Moderate or Intense Low oxygen Dilution combustion regime is to use a dynamic evaluation, in which the ratio between the variance of mixture fraction and its dissipation rate is adopted, rather than global estimations based on Kolmogorov or integral mixing scales. This is supported by the validation of the numerical results against experimental profiles of temperature and species mass fractions, available from measurements on the Adelaide Jet in Hot Co-flow burner. Different approaches for chemical time scale evaluation are also compared, using the species formation rates, the reaction rates and the eigenvalues of the formation rate Jacobian matrix. Different co-flow oxygen dilution levels and Reynolds numbers are considered in the validation work, to evaluate the applicability of Partially-Stirred Reactor approach over a wide range of operating conditions. Moreover, the influence of specifying uniform and non-uniform boundary conditions for the chemical scalars is assessed. The present work sheds light on the key mechanisms of turbulence-chemistry interactions in advanced combustion regimes. At the same time, it provides essential information to advance the predictive nature of computational tools used by scientists and engineers, to support the development of new technologies.

Abstract The urge to increase renewable energy penetration into the power supply mix has been frequently highlighted in response to climate change. South Korea was analyzed as a case study for which the government has shown motivation to increase renewable energy penetration. Herein, a hybrid renewable energy system (HRES) including solar and wind energies were selected due to their relatively stable and mature technology. In addition, Power-to-X has been incorporated to cover other renewable energy options such as hydrogen and synthetic natural gas (SNG). Therefore, an approach of forecasting the weather characteristics and demand loading over a relatively long timeframe was implemented via deep learning techniques (LSTM and GRU) and statistical approaches (Fbprophet and SARIMA), respectively. A deployment strategy incorporating HRES and Power-to-X is then proposed in correspondence to the forecasted results of the 15 regions considered in this study. An extension of this, the reliability of the designed system is further assessed based on the probability of the demand losses with the aid of Monte-Carlo simulation. With the proposed deployment strategy, a total annual cost of 9.88 × 1011 $/year and a greenhouse gas reduction of 1.24 × 106 tons/year are expected for a 35% renewable energy penetration. However, only SNG shows relatively competitive cost (at 23.20 $/m3 SNG), whereas the average costs of electricity (0.133 $/kWh) and hydrogen (7.784 $/kg H2) across the regions are yet to be competitive compared to the current market prices. Nonetheless, the priority of deployment across regions has been identified via TOPSIS.

Abstract With the increase of energy consumption and wastes generation due to human activities, anaerobic digestion (AD), a technology which turns wastes into bio-energy, is receiving more and more attention in the world. It is well known that there are at least three stages involved in anaerobic digestion, i.e., hydrolysis, acidification, and methanogenesis. Until now, however, the advances in enhancing acidification and methanogenesis have not been reviewed. This review provides a comprehensive overview of the methods reported to enhance each step involved in anaerobic digestion. More important, enzymes are the key to anaerobic digestion, and the strategies for improving enzyme activity are summarized. As electron transfer has been reported to play an important role in anaerobic digestion, the research progress of the approaches for the acceleration of direct interspecies electron transfer in methane production is also introduced. In addition, the recent advances in increasing the reduction of carbon dioxide to methane, which has been widely observed in methanogenesis step, are reviewed. Furthermore, the techno-economic assessment of anaerobic digestion is made, and the key points for future studies are proposed.

This special edition to be published in Applied Energy brings together a range of papers that explore the complex, multi-dimensional and inter-related issues associated with the supply or value chains that make up energy systems and how a focus on them can bring new insights for energy security in a low carbon transition.\ud \ud Dealing with the trilemma of maintaining energy security, reducing greenhouse gas emissions and maintaining affordability for economies and end users are key issues for all countries, but there are synergies and trade-offs in simultaneously dealing with these different objectives. Currently, industrialised energy systems are dominated by supply chains based on fossil fuels and these, for the most part, have been effective in enabling energy security and affordability. However, they are increasingly struggling to do this, particularly in respect to efforts to tackle climate change, given that the energy sector is responsible for around two-thirds of the global greenhouse gas emissions [1]. A key challenge is therefore how to decarbonise energy systems, whilst also ensuring energy security and affordability. This special issue, through a focus on supply chains, particularly considers the interactions and relationships between energy security and decarbonisation.\ud \ud Energy security is a property of energy systems and their ability to withstand short-term shocks and longer-term stresses depends on other important system properties including resilience, robustness, flexibility and stability [2]. Energy systems are essentially a supply chain comprising of multiple and interrelated sub-chains based around different fuels, technologies, infrastructures, and actors, operating at different scales and locations – from extraction/imports and conversion through to end use [3]. These supply chains have become increasingly globalised and are influenced by the on-going shifts in global supply and demand. Thus the aim of this special issue is to explore and discuss how to enable the development of a secure and sustainable energy system through a better understanding of both existing and emerging low carbon energy supply chains as well as of new approaches to the design and management of energy systems. In part, because moving from a system dominated by fossil fuels to one based on low carbon creates a new set of risks and uncertainties for energy security as well as new opportunities.\ud \ud A large number of submissions from over 18 countries were received for this special edition and 16 papers were accepted after peer review. These address a variety of issues and we have chosen to discuss the findings under two key themes, although many of the papers cut across these: (1) Insights from, and for, supply chain analysis. (2) Insights for energy security and its management. We then provide in (3) a summary of insights and research gaps. Table 1 provides a snapshot of the areas covered by the papers showing: theme (s); empirical domains; and geographical coverage.