• Energy Research
• 13. Climate action close
• 7. Clean energy close
• 3. Good health close
• AU close
• Sustainability close

A new environmental ban has forced the restructure of open dumps in China since 1 July 2011. A technical process was established in this study that is feasible for the upgrade of open dumps through restructuring. The feasibility of restructuring and the benefit of greenhouse gas emission reductions were assessed according to field surveys of five landfills and four dumps in Nanjing. The results showed that the daily processing capacities of the existing landfills have been unable to meet the growth of municipal solid waste (MSW), making restructuring of the landfills imperative. According to an assessment of the technical process, only four sites in Nanjing were suitable for upgrading. Restructuring the Jiaozishan landfill effectively reduced the leachate generation rate by 5.84% under its scale when expanded by 60.7% in 2015. CO2 emissions were reduced by approximately 55,000–86,000 tons per year, in which biogas power generation replaced fossil fuels Fossil fuels accounted for the largest proportion, up to 45,000–60,000 tons. Photovoltaic power generation on the overlying land has not only reduced CO2 emissions to 26,000–30,000 tons per year but has also brought in continuing income from the sale of electricity. The funds are essential for developing countries such as China, which lack long-term financial support for landfill management after closure.

Sustainability has emerged, arguably, as the premiere mission of contemporary architecture. Green assessment tools abound, consultancy services flourish, buildings are marketed on the basis of sustainability performance, and government, media, and corporations seem preoccupied with assessing the quality of the built environment through a green lens. Yet for all the effort, and indeed for all the progress made, fundamental issues resistant to the structural change that is essential for genuine sustainability remain. This paper reviews the state of play of sustainability across the urban landscape. It considers the road travelled so far, and points out some of the major challenges that lie ahead.

A key determinant and outcome of successful environmental education is ‘pro-environmental behavior’, i.e., behavior that involves conscious action to mitigate adverse environmental impacts at personal or community level, e.g., reducing resource consumption and waste generation, avoiding toxic substances, and organizing community awareness initiatives. However, some theorists have sought to move away from rationalist models of behavioral modification, towards holistic pedagogical initiatives that seek to develop action competence. In light of the global push towards achievement of the Sustainable Development Goals (SDGs), emerging evidence suggests that education initiatives should foster action competence so students may be equipped to contribute to sustainable development as part of their education. The UNESCO Education for Sustainable Development (ESD) Roadmap 2030 has also identified key priority areas to strengthen ESD in formal curricula. This article reports two informal environmental education initiatives for promoting action competence and pro-environmental behaviors in school-aged children. The authors recommend that formal education settings (e.g., schools) should incorporate self-directed, free-choice project-based learning to augment environmental education programs and promote students’ action competence for contribution to attainment of SDGs. To this end, we propose a Free-Choice Project-based Learning for Action Competence in Sustainable Development (ACiSD) Curriculum, comprising six implementation dimensions, namely: (1) project duration and teaming arrangements, (2) topic selection, (3) student support, (4) teacher support, (5) learning environments, and (6) digital access and equity. For each implementation dimension, we recommend action steps to help educators implement this curriculum in their own educational settings, with the aid of an illustrative worked example.

Few studies on population-specific health effects of extreme temperature on cardiovascular diseases (CVDs) deaths have been conducted in the subtropical and tropical climates of China. We examined the association between extreme temperature and CVD across four cities in China. We performed a two-stage analysis; we generated city-specific estimates using a distributed lag non-linear model (DLNM) and estimated the overall effects by conducting a meta-analysis. Heat thresholds of 29 °C, 29 °C, 29 °C, and 30 °C and cold thresholds of 6 °C, 10 °C, 14 °C, and 15 °C were observed in Hefei, Changsha, Nanning, and Haikou, respectively. The lag periods for heat-related CVD mortality were observed only for 0–2 days, while those of cold-related CVD mortality were observed for 10–15 days. The meta-analysis showed that a 1 °C increase above the city-specific heat threshold was associated with average overall CVD mortality increases of 4.6% (3.0%–6.2%), 6.4% (3.4%–9.4%), and 0.2% (−4.8%–5.2%) for all ages, ≥65 years, and <65 years over a lag period of 0–2 days, respectively. Similarly, a 1 °C decrease below the city-specific cold threshold was associated with average overall CVD mortality increases of 4.2% (3.0%–5.4%), 4.9% (3.5%–6.3%), and 3.1% (1.7%–4.5%), for all ages, ≥65 years, and <65 years over a lag period of 0–15 days, respectively. This work will help to take appropriate measures to reduce temperature-mortality risk in different populations in the subtropical and tropical climates of China.

Identifying local energy sources and devising a circular economy could improve self-sufficiency in many Pacific Islands. On the islands with significant agriculture, the residue from the cultivation of plants has promising energy potential. The waste stream is another potential source of energy that otherwise should undergo proper treatment. Additionally, cold-storage capacity improves the preservation of crops and increases the agricultural exports of these islands. This study proposes a combined cooling and power (CCP) system driven by biomass from agriculture residue and waste streams as fuel for different districts in Tonga. The units supply a fraction of the districts’ electricity demand and provide sufficient cold-storage capacity to preserve the prospective yield of a fraction of fallow lands. The technical and economic performance of the CCP units was analysed for different fractions of electricity demand and fallow land exploitation in each district during a year of operation. The results show that the optimum combination of the CCP units supplies 38% of the total electricity demand of Tonga and prevents the annual consumption of 7.4 million litres of diesel and emission of 20 kilotonnes of CO2. In addition, it provides 3700 m2 of cold-storage area, which is sufficient for preserving the prospective yield of the exploitation of 27% of the total fallow land of Tonga. Annual export revenue of about AU$10 million is expected from such a cold-storage capacity for Tongan farmers. Furthermore, the units consume 10,000 tonnes of annual waste, significantly reducing waste management costs. This study presents an example of a comprehensive circular-economy solution for a remote island state that improves its socioeconomic and environmental condition by supplying the community’s local needs from its available and abundant resources under a viable business model. The solution presented in this study can be adapted to many island communities with significant agriculture in the economy and crucial energy and cooling needs.

This study aimed to conduct a techno-economic performance and optimisation analysis of grid-connected PV, wind turbines, and battery packs for Syiah Kuala University, situated at the tip of Sumatra island in the tsunami-affected region. The simulation software Hybrid Optimisation Model for Electric Renewables (HOMER) was used to analyse and optimise the renewable energy required by the institution. The methodology began with the location specification, average electric load demand, daily radiation, clearness index, location daily temperature, and system architecture. The results revealed that the energy storage system was initially included in the simulation, but it was later removed in order to save money and optimise the share of renewable energy. Based on the optimisation results, two types of energy sources were chosen for the system, solar PV and wind turbine, which contributed 62% and 20%, respectively. Apart from the renewable energy faction, another reason for the system selection is cost of energy (CoE), which decreased to $0.0446/kWh from $0.060/kWh. In conclusion, the study found that by connecting solar PV and wind turbines to the local grid, this renewable energy system is able to contribute up to 82% of the electricity required. However, the obstacle to implementing renewable energy in Indonesia is the cheap electricity price that is mainly generated using cheap coal, which is abundantly available in the country.

In this paper, we apply game theory to study the price competition between drugstores and hospitals in China’s pharmaceutical supply chain. Motivated by drug shortages and price disparity problems, we build a simplified model with one supplier, one hospital, and one drugstore in which the sellers sell one kind of drug and compete on price. The hospital receives a discount from the government when ordering the drug and both sellers face a price-sensitive and uncertain demand. The existence and uniqueness of a Nash equilibrium are proved and closed-form solutions are found for linear demand cases. We characterize the pricing and ordering decisions of the hospital and drugstore. The analysis shows that high ex-factory price, high price sensitivity, and a small discount are three factors contributing to drug shortages. We consider two special kinds of linear demand to obtain insights into the drug price disparity problem.

Energy-efficient retrofitting has emerged as a primary strategy for reducing the energy consumption of buildings. Buildings in China account for about 40% of total national energy consumption. Large office buildings account for the most. Less than 5% of the building area of existing office buildings is energy efficient. Energy-efficient retrofitting for sustainable buildings is a complicated system that involves various sustainable dimensions and operational technical schemes. Making multi-criteria decisions becomes a challenging problem for stakeholders. Based on the theory of sustainability, this paper establishes a sustainable analysis framework to guide stakeholders to select an optimal technical combination of energy-efficient retrofit measures for large office buildings. Based on empirical data collected in Beijing, a number of energy efficiency measures are selected, tailored and applied to a virtual model of a typical large office building. Technical features and the energy performance are simulated accordingly. The energy consumption, energy-saving ratio and lifecycle costs are derived to identify the optimal configuration. The outcome of this research offers a feasible technical plan for stakeholders relating to technical design and design making. The study finds that an LED lighting system and frequency conversion device for the cooling water chiller cannot only sufficiently reduce the building’s energy consumption but also perform economically. Different thermal insulation materials for reconstructing the building envelope have no obvious effect on the thermal performance in comprehensive simulations of technology combinations. The sustainable analysis framework offers theoretical and practical support and can be used as a reference for the other types of buildings in future research.