• Energy Research
• Open Access close
• Embargo close
• MY close
• BD close
• Energies close

Global fossil fuel reserves are declining due to differential uses, especially for power generation. Everybody can help to do their bit for the environment by using solar energy. Geographically, Bangladesh is a potential zone for harnessing solar energy. In March 2021, the renewable generation capacity in Bangladesh amounted to 722.592 MW, including 67.6% from solar, 31.84% from hydro, and 0.55% from other energy sources, including wind, biogas, and biomass, where 488.662 MW of power originated from over 6 million installed solar power systems. Concurrently, over 42% of rural people still suffer from a lack of electricity, where solar energy can play a vital role. This paper highlights the present status of various forms of solar energy progress in Bangladesh, such as solar parks, solar rooftops, solar irrigation, solar charging stations, solar home systems, solar-powered telecoms, solar street lights, and solar drinking water, which can be viable alternative sources of energy. This review will help decision-makers and investors realize Bangladesh’s up-to-date solar energy scenario and plan better for the development of a sustainable society.

Global fossil fuel reserves are declining due to differential uses, especially for power generation. Everybody can help to do their bit for the environment by using solar energy. Geographically, Bangladesh is a potential zone for harnessing solar energy. In March 2021, the renewable generation capacity in Bangladesh amounted to 722.592 MW, including 67.6% from solar, 31.84% from hydro, and 0.55% from other energy sources, including wind, biogas, and biomass, where 488.662 MW of power originated from over 6 million installed solar power systems. Concurrently, over 42% of rural people still suffer from a lack of electricity, where solar energy can play a vital role. This paper highlights the present status of various forms of solar energy progress in Bangladesh, such as solar parks, solar rooftops, solar irrigation, solar charging stations, solar home systems, solar-powered telecoms, solar street lights, and solar drinking water, which can be viable alternative sources of energy. This review will help decision-makers and investors realize Bangladesh’s up-to-date solar energy scenario and plan better for the development of a sustainable society.

This study focused on investigating the bottoming power cycles operating with CO2-based binary mixture, taking into account exergetic, economic and exergo-environmental impact indices. The main intent is to assess the benefits of employing a CO2-based mixture working fluid in closed Brayton bottoming power cycles in comparison with pure CO2 working fluid. Firstly, selection criteria for the choice of suitable additive compound for CO2-based binary mixture is delineated and the composition of the binary mixture is decided based on required cycle minimum temperature. The decided CO2-C7H8 binary mixture with a 0.9 mole fraction of CO2 is analyzed in two cycle configurations: Simple regenerative cycle (SRC) and Partial heating cycle (PHC). Comparative analysis among two configurations with selected working fluid are carried out. Thermodynamic analyses at varying cycle pressure ratio shows that cycle with CO2-C7H8 mixture shows maximum power output and exergy efficiency at rather higher cycle pressure ratio compared to pure CO2 power cycles. PHC with CO2-C7H8 mixture shows 28.68% increment in exergy efficiency with the levelized cost of electricity (LCOE) 21.62% higher than pure CO2 PHC. Whereas, SRC with CO2-C7H8 mixture shows 25.17% increment in exergy efficiency with LCOE 57.14% higher than pure CO2 SRC. Besides showing lower economic value, cycles with a CO2-C7H8 mixture saves larger CO2 emissions and also shows greater exergo-environmental impact improvement and plant sustainability index.

This study focused on investigating the bottoming power cycles operating with CO2-based binary mixture, taking into account exergetic, economic and exergo-environmental impact indices. The main intent is to assess the benefits of employing a CO2-based mixture working fluid in closed Brayton bottoming power cycles in comparison with pure CO2 working fluid. Firstly, selection criteria for the choice of suitable additive compound for CO2-based binary mixture is delineated and the composition of the binary mixture is decided based on required cycle minimum temperature. The decided CO2-C7H8 binary mixture with a 0.9 mole fraction of CO2 is analyzed in two cycle configurations: Simple regenerative cycle (SRC) and Partial heating cycle (PHC). Comparative analysis among two configurations with selected working fluid are carried out. Thermodynamic analyses at varying cycle pressure ratio shows that cycle with CO2-C7H8 mixture shows maximum power output and exergy efficiency at rather higher cycle pressure ratio compared to pure CO2 power cycles. PHC with CO2-C7H8 mixture shows 28.68% increment in exergy efficiency with the levelized cost of electricity (LCOE) 21.62% higher than pure CO2 PHC. Whereas, SRC with CO2-C7H8 mixture shows 25.17% increment in exergy efficiency with LCOE 57.14% higher than pure CO2 SRC. Besides showing lower economic value, cycles with a CO2-C7H8 mixture saves larger CO2 emissions and also shows greater exergo-environmental impact improvement and plant sustainability index.

Biodiesel as an alternative to diesel fuel produced from vegetable oils or animal fats has attracted more and more attention because it is renewable and environmentally friendly. Compared to conventional diesel fuel, biodiesel has slightly lower performance in engine combustion due to the lower calorific value that leads to lower power generated. This study investigates the effect of multi-walled carbon nanotubes (MWCNTs) as an additive to the rice bran methyl ester (RBME). Artificial neural network (ANN) and response surface methodology (RSM) was used for predicting the calorific value. The interaction effects of parameters such as dosage of MWCNTs, size of MWCNTs and reaction time on the calorific value of RBME were studied. Comparison of RSM and ANN performance was evaluated based on the correlation coefficient (R2), the root mean square error (RMSE), the mean absolute percentage error (MAPE), and the average absolute deviation (AAD) showed that the ANN model had better performance (R2 = 0.9808, RMSE = 0.0164, MAPE = 0.0017, AAD = 0.173) compare to RSM (R2 = 0.9746, RMSE = 0.0170, MAPE = 0.0028, AAD = 0.279). The optimum predicted of RBME calorific value that is generated using the cuckoo search (CS) via lévy flight optimization algorithm is 41.78 (MJ/kg). The optimum value was obtained using 64 ppm of < 7 nm MWCNTs blending for 60 min. The predicted calorific value was validated experimentally as 41.05 MJ/kg. Furthermore, the experimental results have shown that the addition of MWCNTs was significantly increased the calorific value from 36.87 MJ/kg to 41.05 MJ/kg (11.6%). Also, the addition of MWCNTs decreased flashpoint (−18.3%) and acid value (−0.52%). As a conclusion, adding MWCNTs as an additive had improved the physicochemical properties characteristics of RBME. To our best knowledge, no research has yet been performed on the effect of multi-walled carbon nanotubes-additive in physicochemical property of rice brand methyl ester application so far.

Biodiesel as an alternative to diesel fuel produced from vegetable oils or animal fats has attracted more and more attention because it is renewable and environmentally friendly. Compared to conventional diesel fuel, biodiesel has slightly lower performance in engine combustion due to the lower calorific value that leads to lower power generated. This study investigates the effect of multi-walled carbon nanotubes (MWCNTs) as an additive to the rice bran methyl ester (RBME). Artificial neural network (ANN) and response surface methodology (RSM) was used for predicting the calorific value. The interaction effects of parameters such as dosage of MWCNTs, size of MWCNTs and reaction time on the calorific value of RBME were studied. Comparison of RSM and ANN performance was evaluated based on the correlation coefficient (R2), the root mean square error (RMSE), the mean absolute percentage error (MAPE), and the average absolute deviation (AAD) showed that the ANN model had better performance (R2 = 0.9808, RMSE = 0.0164, MAPE = 0.0017, AAD = 0.173) compare to RSM (R2 = 0.9746, RMSE = 0.0170, MAPE = 0.0028, AAD = 0.279). The optimum predicted of RBME calorific value that is generated using the cuckoo search (CS) via lévy flight optimization algorithm is 41.78 (MJ/kg). The optimum value was obtained using 64 ppm of < 7 nm MWCNTs blending for 60 min. The predicted calorific value was validated experimentally as 41.05 MJ/kg. Furthermore, the experimental results have shown that the addition of MWCNTs was significantly increased the calorific value from 36.87 MJ/kg to 41.05 MJ/kg (11.6%). Also, the addition of MWCNTs decreased flashpoint (−18.3%) and acid value (−0.52%). As a conclusion, adding MWCNTs as an additive had improved the physicochemical properties characteristics of RBME. To our best knowledge, no research has yet been performed on the effect of multi-walled carbon nanotubes-additive in physicochemical property of rice brand methyl ester application so far.

The number and size distributions of the water dispersed phase have a significant effect on both the long-term stability of an emulsion, and the probability of micro-explosions inside an engine. The emulsions are subjected to intense pressure and shear flow in the fuel injection equipment resulting in changes in the number and size distributions of the dispersed phase. These changes, in turn, have significant effects on the micro-explosion behavior of the droplets. To our knowledge, these effects are not known and have not been reported previously. To uncover some of these effects we carried out a comprehensive experimental investigation on an emulsion spray of 10% water (by volume) in diesel at different injection pressures of 500, 1000 and 1500 bar. A measurement system consisting of a high-speed camera was used to visualize the droplets’ micro-explosions and a thermocouple measured the temperature. Our measurements indicated that the emulsion shear in the injector nozzle shifted the emulsion droplet size distribution towards the smaller end resulting in a delay in the onset of micro-explosion. This delay in the onset of the micro-explosion is thought to be due to the decrease in the dispersed water coalescence rate which, in turn, increases the stability of the emulsion. The results also show that this delay in the onset of micro-explosion, and the temperature required for its onset, increased with injection pressure.