• Energy Research
• Restricted close
• Open Source close
• 11. Sustainability close
• 2. Zero hunger close
• DE close
• BE close

The design and assessment of net-zero buildings commonly focus exclusively on the operational phase, ignoring the embodied environmental impacts over the building life cycle. An analysis is presented on the consequences of integrating embodied impacts into the assessment of the environmental advantageousness of net-zero concepts. Fundamental issues needing consideration in the design process - based on the evaluation of primary energy use and related greenhouse gas emissions - are examined by comparing three net-zero building design and assessment cases: (1) no embodied impacts included, net balance limited to the operation stage only; (2) embodied impacts included but evaluated separately from the operation stage; and (3) embodied impacts included with the operation stage in a life cycle approach. A review of recent developments in research, standardization activities and design practice and the presentation of a case study of a residential building in Norway highlight the critical importance of performance indicator definitions and system boundaries. A practical checklist is presented to guide the process of incorporating embodied impacts across the building life cycle phases in net-zero design. Its implications are considered on overall environmental impact assessment of buildings. Research and development challenges, as well as recommendations for designers and other stakeholders, are identified.

Abstract For the option of “carbon capture and storage”, an integrated assessment in the form of a life cycle analysis and a cost assessment combined with a systematic comparison with renewable energies regarding future conditions in the power plant market for the situation in Germany is done. The calculations along the whole process chain show that CCS technologies emit per kWh more than generally assumed in clean-coal concepts (total CO2 reduction by 72–90% and total greenhouse gas reduction by 65–79%) and considerable more if compared with renewable electricity. Nevertheless, CCS could lead to a significant absolute reduction of GHG-emissions within the electricity supply system. Furthermore, depending on the growth rates and the market development, renewables could develop faster and could be in the long term cheaper than CCS based plants. Especially, in Germany, CCS as a climate protection option is phasing a specific problem as a huge amount of fossil power plant has to be substituted in the next 15 years where CCS technologies might be not yet available. For a considerable contribution of CCS to climate protection, the energy structure in Germany requires the integration of capture ready plants into the current renewal programs. If CCS retrofit technologies could be applied at least from 2020, this would strongly decrease the expected CO2 emissions and would give a chance to reach the climate protection goal of minus 80% including the renewed fossil-fired power plants.

AbstractClimate change and land‐use change are two major drivers of biome shifts causing habitat and biodiversity loss. What is missing is a continental‐scale future projection of the estimated relative impacts of both drivers on biome shifts over the course of this century. Here, we provide such a projection for the biodiverse region of Latin America under four socio‐economic development scenarios. We find that across all scenarios 5–6% of the total area will undergo biome shifts that can be attributed to climate change until 2099. The relative impact of climate change on biome shifts may overtake land‐use change even under an optimistic climate scenario, if land‐use expansion is halted by the mid‐century. We suggest that constraining land‐use change and preserving the remaining natural vegetation early during this century creates opportunities to mitigate climate‐change impacts during the second half of this century. Our results may guide the evaluation of socio‐economic scenarios in terms of their potential for biome conservation under global change.

Capítulos en libros This paper assesses the scalability and replicability of smart grid projects, by means of the identification of limitations and barriers faced by these projects. Factors have been identified that impact a project s scalability and replicability by means of a review of demonstration projects. The factors are of technical, economic, regulatory and social acceptance nature, and they describe requirements for scalability and replicability. Data was collected from ongoing European smart grid demonstration projects through the use of an elaborated questionnaire on the identified factors. Which allowed to quantify the status quo to what extent projects have taken these factors into account. Dew to their nature the derived factors can be categorized in technical, economic and regulatory & stakeholder related factor areas The obtained results allowed the identification of barriers, i.e. limitations regarding the scalability and replicability of smart grid projects. In particular projects face barriers regarding the absence of standards, the physical limits of the existing infrastructure, the absence of cost-benefit analyses, the neglect of varying macro-economic factors, stakeholder involvement and from the dependency of projects on regional or national regulatory frameworks and market designs. info:eu-repo/semantics/publishedVersion

Urban environments provide opportunities for greater resource efficiency and the fostering of urban ecosystems. Brownfield areas are a typical example of underused land resources. Brownfield redevelopment projects that include green infrastructure allow for further ecosystems to be accommodated in urban environments. Green infrastructure also deliver important urban ecosystem services (UES) to local residents, which can greatly contribute to improving quality of life in cities. In this case study, we quantify and assess the economic value of five UES for a brownfield redevelopment project in Antwerp, Belgium. The assessment is carried out using the “Nature Value Explorer” modelling tool. The case includes three types of green infrastructure (green corridor,infiltration gullies and green roofs) primarily intended to connect nature reserves on the urban periphery and to avoid surface runoff. The green infrastructure also provides air filtration, climate regulation, carbon sequestration and recreation ecosystem services. The value of recreation far exceeds other values, including the value of avoided runoff. The case study raises crucial questions as to whether existing UES valuation approaches adequately account for the range of UES provided and whether such approaches can be improved to achieve more accurate and reliable value estimates in future analyses.

Abstract Fodder for feeding pork and poultry requires a large amount of cultivated and processed agricultural crops, which are often related to greenhouse gas emissions from land-use change (LUC). Given the rapid growth in meat production in Brazil for domestic consumption and international export, the link between LUC emissions and consumption of pork and poultry meat is central to evaluating the role of Brazilian meat production and the implications for international climate policies. In this paper, we first estimate LUC emissions from soybean production destined to feed pork and poultry in Brazil during the period 2008–2012. Second, we allocate such emissions to domestic and international consumption of pork and poultry meat. Concerning international consumption, Brazilian export of meat to 189 countries is evaluated. Although the majority of the LUC emissions from soybean production are tied to the domestic consumption, 17% and 39% of the emissions embodied in Brazilian pork and poultry, respectively, are exported to other countries. The most prominent destinations of Brazilian pork and poultry in terms of embodied LUC emissions are Eastern Europe, Asia and South America. In the case of pork, the fluxes of emissions from Brazil to Ukraine (1.28 Mt CO2-eq) and Russia (1.18 Mt CO2-eq) are particularly large. In the case of poultry, the largest transfers of embodied emissions are from Brazil to developing countries and especially the Middle East. These results are relevant to environmental policies and international agreements aimed at achieving the sustainability of Brazil's meat sector.

The use of bio-plastic-based packaging as an alternative to conventional plastic packaging is increasing. Among the plethora of different bio-based plastics, the most relevant ones are those that, at the end of their life, can be treated with the organic fraction of municipal solid waste. Even in these cases, their impact on the waste processing and recycling is not always positive. This study aim to assess on a laboratory scale the influence on combined anaerobic digestion and composting industrial processes of a bio-based plastic film, namely cellulose acetate (CA), in pure and modified (additions of additive) forms. CA films were mixed with organic waste and subjected to: (i) anaerobic digestion; (ii) active composting and (iii) two stages of curing composting. Anaerobic digestion and composting were monitored through methane yield and oxygen uptake respectively; additionally, the bio-plastics degree of disintegration was assessed during all the processes. The final disintegration of pure and modified CA was 73.82% and 54.66%, respectively. Anaerobic digestion contributes to the disintegration of the material, while aerobic treatment appears to be nearly ineffective, especially for modified CA. The presence of cellulose acetate during anaerobic digestion of food waste increased the methane yield by about 4.5%. Bioassay confirmed the absence of possible toxic effects on the final compost from the bio-plastic treatment. Although bio-based materials are not the only solution to plastic pollution, the findings confirm the need to upgrade the organic waste treatment plants and the necessity to revise the requirements for the use of compost in agriculture.