• Energy Research
• Closed Access close
• GB close
• CA close
• DE close
• AU close

This study assessed the hand hygiene performance in French nursing homes using the consumption of alcohol-based hand rubs (AHRs) as a surrogate. Nursing homes from the 17 French regions were contacted to collect their AHR consumption and occupancy in 2018 and 2019. A total of 1290 nursing homes from 15 French regions participated in the survey. The estimated median number of hand hygiene actions per resident-day was 1.48 (interquartile range: 1.04-2.03) in 2018 and 1.60 (1.10-2.26) in 2019. A significantly higher AHR consumption was observed in public nursing homes with an infection control team or link nurse.

Abstract In this study, crude cellulose derived from cornstalk, after bleaching, was used as raw material for the synthesis of sodium carboxymethyl cellulose (CMC) by reacting with the cellulose with NaOH and chloroacetic acid at 75 °C for 1.5 h. Effects of alkali dosage, concentration of chloroacetic acid on the physical and chemical properties of the CMC products were investigated. It was revealed that the reactants alkali reagent/chloroacetic acid/cellulose at the molar ratio of 4.6:2.8:1and 4:2.5:1, or at the molar ratio of NaOH/ClCH 2 COOH ≈1.6–1.64, resulted in CMC products of relatively high water solubility. The viscosity-average molecular weight M v of these two CMC products obtained at molar ratios of 4.0:2.5:1 and 4.6:2.8:1 is in the range of 1.94 × 10 4 –2.48 × 10 4 g mol −1 , and the average DS of the two products are 0.57 and 0.85, respectively. As the solute concentration is above 2 wt%, the viscosity of the CMC-water solution exhibits nonlinear (exponential) increasing with increasing the solute concentration (typical of non-Newton fluids).

The passivation of iron and steel (DIN 1623) was studied by integral and depth selective conversion electron Mossbauer spectroscopy and Auger electron spectroscopy. Thickness and phase composition of the passive layer formed in sulphate solution and in a phosphate buffer were determined in dependence on the anodic potential and the duration of the passivating procedure. The experimental results lead to the conclusion that not the whole oxidic layer is responsible for the passivity but only a very thin intermediate layer formed between the cubic substrate and the rhombic oxide (γ-FeOOH) cover.

AbstractCumulus‐intact and ‐denuded unfertilized oocytes from two mouse strains were exposed to 1.5 m ethanol (EtOH) or two cryoproteclant solutions, 1.5 M propanediol (PROH) or 1.5 M dimethylsulfoxide (DMSO), for 4.5 min at 27°C, and the proportion of activating or degenerating oocytes studied. Exposure to DMSO did not significantly increase activation above that of oocytes not exposed to DMSO. Treatment of oocytes in PROH resulted in the activation of up to 87% of viable oocytes. This was significantly higher (P <01) than in control oocytes and comparable to the rate of activation after treatment with EtOH (59–96% activation). In solutions at 1°C, 47% of control oocytes were activated, which was not significantly different from the rate of activation in EtOH (36%) or PROH (50%) at 1°C. Following treatment with PROH, up to 87% of oocytes degenerated within a period of 6 h in vitro. The age of the oocytes (h post hCG) and the time of cumulus removal with the enzyme hyaluronidase, relative to the time of exposure to the chemicals, influenced the level of degeneration in most groups. Significantly fewer oocytes degenerated when cumulus cells were removed before treatment (0–31%) than when the cumulus was left intact throughout the treatment and 6 h culture period (10–87%). Exposure to PROH at 1°C reduced oocyte degeneration to 5%. We conclude that PROH causes significantly greater losses of oocytes as a result of parthenogenetic activation and degeneration than of exposure to DMSO.

Among various bioreactors examined in anaerobic digestion and dark fermentation, UASB bioreactor has shown to be a promising alternative. However, mass transfer resistance and biomass washout have been the issues that reported as draw backs of the granular system in the literature. Another problem associated with such a system is its long start-up period as a result of biomass washout and long microbial granulation stage. In this paper, the results obtained from an UASFF bioreactor in methane (AD process) and hydrogen (DF process) production from POME, are presented to assess mass transfer of substrate into the granules and also study the role of internal packing used in the middle part of reactor in the process stability. The value of effectiveness factor, η, for AD and DF processes were calculated to be 0.96 and 0.94, respectively, indicating that there was no mass transfer resistance due to internal and/or external factors. The results showed that the packing material could retain biomass in the reactor and had outstanding contribution in the granulation enhancement. Its role as a supplementing treatment stage was more significant at low HRTs and up-flow velocities.

A detailed analysis of the effects of ground grid configuration on grounding performance has been carried out for uniform and horizontally stratified soils with multiple layers. The results of the analysis reveal that the most efficient and cost-effective design is highly dependent on soil structure type and characteristics. In the absence of ground rods, grounding grids with uniform mesh size are quite efficient in soils having a thin (relative to grid size) high resistivity (relative to the lower layers) top soil, while grids with small mesh size at the periphery of the grid provide optimum performance in uniform soils and soils with low resistivity top soils. Ground rods were found to be effective only when a significant portion of their length is in contact with a low resistivity soil, as expected.

Experiments were carried out to determine the accuracy and validity of estimations of hepatic blood flow from systemic clearances of ethanol during very low dose (8 μmol∙min−1∙kg−1) infusions of ethanol in anesthetized cats. Systemic clearances were compared with directly measured hepatic blood flow using a hepatic venous long-circuit technique. This technique allowed direct measurement and alteration of hepatic blood flow and collection of arterial, portal, and hepatic venous blood samples without depletion of the animal's blood volume. In 18 cats, Vmax for ethanol was 93 ± 7 μmol∙min−1 per 100 g liver or 21 ± 2 μmol∙min−1∙kg·body weight−1 and Km was 144 ± 19 μM in terms of logarithmic mean sinusoidal concentration. At the dose of 8 μmol∙min−1∙kg body weight−1 used for estimation of hepatic blood flow, extraction was 0.95 ± 0.07 (mean ± SD). Systemic clearance of ethanol overestimated directly measured hepatic blood flow by 15 ± 16%. Hepatic blood flow changes expressed as percentages of the control level were accurately estimated from systemic ethanol clearance (100 ± 10%). Since 73 ± 12% of the infused ethanol was eliminated by the liver and 83 ± 11% was eliminated by the splanchnic bed, an extrasplanchnic uptake of 17% accounted for the overestimation of hepatic blood flow. Estimation of hepatic blood flow from systemic clearances of ethanol during very low dose infusions may have advantages over other clearance methods. Its use in cats was illustrated in a separate series of experiments and it was shown that surgery significantly reduced hepatic blood flow. The method may merit trial for estimation of hepatic blood flow in humans.