• Energy Research
• Open Access close
• other engineering and technologies close
• CA close
• BE close
• UA close
• MA close

To mitigate the temperature increase in urban environments and reduce its impact on energy consumption and the quality of the environment, urban retrofitting technologies have been developed and applied worldwide. High albedo in urban surfaces and additional vegetation are the most efficient strategies to accomplish these goals. The objective of this study is to estimate the weight of these strategies, both individually and integrated, on the cooling potential of two Latin American cities. To do this, 36 low and high urban density scenarios were simulated with the ENVI-Met software. The simulation models were calibrated using air temperature curves which were monitored during the summer periods from 2010 to 2013. A Principal Components Analysis was carried out to establish possible associations between the proposed mitigation strategies and then the weight of anthropogenic heat was evaluated according to the configuration. The results show that the integrated mitigation strategies in urban areas -i. e. increase vegetation and albedo on horizontal surfaces- has a great potential to mitigate urban warming, showing a more significant impact on low-density urban configuration. The contribution of anthropogenic heat mainly produced by motorized transport and air conditioning systems, is a crucial input data for the urban microclimate simulations. Its impact on the urban densification processes may cancel out the benefits derived by the application of the mitigation strategies considered.

The paper presents an experimental study on the formation process of burden surface texture on the blast furnace throat and its influence on the radial distribution of gas flow. The study was performed with the application of blast furnaces equipped with a bell-type charging device using radio-isotope means for the control of burden surface texture (profile) and burden surface level, i.e., gamma locators for burden surface texture. The study was carried out under the conditions of an operating blast furnace in an iron and steel plant using a unique GEOTAPS system for automated control of geometric and temperature parameters of burden material surface on the blast furnace throat. The influence of the surface texture on the gas flow distribution was also investigated. The possibility of a self-stabilization effect for burden surface texture and gas flow in an operating blast furnace under suitable conditions was experimentally proven. As a result of the experimental study performed, four ways of energy-saving technology implementation were determined for the control of blast furnace melting based on the data on the burden surface texture and previously unknown regularities of surface layer formation of burden material on the throat of an operating blast furnace with a bell-type charging device. The main idea of the paper is the development of automated control for the radial distribution of burden material and gas flow using actual or predicted surface texture parameters as important intermediate factors that both describe the process and have a significant simultaneous influence on it.

The Box–Jenkins model is a polynomial model that uses transfer functions to express relationships between input, output, and noise for a given system. In this article, we present a Box–Jenkins linear model for a lithium-ion battery cell for use in electric vehicles. The model parameter identifications are based on automotive drive-cycle measurements. The proposed model prediction performance is evaluated using the goodness-of-fit criteria and the mean squared error between the Box–Jenkins model and the measured battery cell output. A simulation confirmed that the proposed Box–Jenkins model could adequately capture the battery cell dynamics for different automotive drive cycles and reasonably predict the actual battery cell output. The goodness-of-fit value shows that the Box–Jenkins model matches the battery cell data by 86.85% in the identification phase, and 90.83% in the validation phase for the LA-92 driving cycle. This work demonstrates the potential of using a simple and linear model to predict the battery cell behavior based on a complex identification dataset that represents the actual use of the battery cell in an electric vehicle.

Abstract In the present study, Loblolly pine biomass residue was converted to bio-oil in a two-step process, consisting of 1) fast pyrolysis in the presence of zeolite ZSM-5 as a catalyst to produce pyrolysis oil, 2) hydrogenation of pyrolysis oil using formic acid as the hydrogen source in presence of Ru/activated carbon catalyst. Pyrolysis oils were analyzed by 13C, 31P and HSQC-NMR and the results revealed that the zeolite-induced catalytic fast pyrolysis process led to effective demethoxylation, producing more catechol and p-hydroxy-phenyl hydroxyl groups in the bio-oils, resulting in a decrease in the methoxyl group content by about 85 % and rich aromatic structures in the pyrolysis oils. The properties of pyrolysis oil with and without zeolite were in the bio-oil range. Hydrogenated pyrolysis oil showed that 79 % of the aromatic protons are eliminated and 87 % of protons are aliphatic in nature, with no oxygen attached to the α-carbon.

Flare stacks are a key element in the safety of petrochemical and refinery industries; the correct operating conditions thereof must be ensured through a schedule for the periodic reviewing of all parts thereof. Advances in Non-Destructive Testing (NDT) in recent years and the application thereof to this field allow reliable, objective information to be obtained. This article describes and groups together the main applicable NDT techniques, analysing their advantages and disadvantages, updated with the new possibilities offered by unmanned aircraft or drones.

AbstractEnhancing the efficiency of the electric vehicle’s powertrain becomes a crucial focus, wherein the control system for the traction motor plays a significant role. This paper presents a novel electric vehicle traction motor control system based on a robust predictive direct torque control approach, an improved version of the conventional DTC, where the traditional switching table and the hysteresis regulators are substituted with a predictive block based on an optimization algorithm. Additionally, a robust predictive speed loop regulator is employed instead of the proportional-integral regulator, which integrates a new cost function with a finite horizon, incorporating integral action into the control law based on a Taylor series expansion. This technique’s primary benefit is its independence from the necessity to measure and observe external disturbances, as well as uncertainties related to parameters. The effectiveness of the suggested system was confirmed through simulation and experimental results under the OPAL-RT platform. The findings indicate that the proposed approach outperforms the conventional method in terms of rejecting disturbances, exhibiting robustness to variations in parameters, and minimizing torque ripple.

The basic requirements for materials of modern fortifications are established and substantiated. It is established that concrete of such structures should have high strength under the influence of static loads and low modulus of deformations. To ensure the required deformability, you must use dampers. A quantitative characteristic of reinforcing steel at dynamic dynamic loads is the dynamic strengthening coefficient, which shows the growth of dynamic strength in comparison with static.

Exterior insulation finishing systems (EIFSs) can efficiently promote energy efficiency of buildings. In this study, an EIFS with high thermal efficiency is presented to improve the insulation behavior of building enclosure. Based on heat transfer analysis results, energy simulations of buildings with fire spread prevention structures were performed. Results revealed that heat flow through the wall increased by 10.3 % when using a metal rail to fix the insulation; in contrast, using non-combustible phenolic foam reduces heat flow by 37.4 %, satisfying the requirement for fire spread prevention structures. Additionally, the energy consumption decreased by 8.8 % when both mineral wool and phenolic foam were applied. Fire spread prevention structures are essential to improve the fire safety performance of buildings. This external insulation system efficiently promote energy saving in building; additionally, leveraging a phase change material to improve the thermal storage performance of the building can reduce energy consumption by up to 11.9 %.