• Energy Research
• Restricted close
• Open Source close
• Embargo close
• CA close
• FR close

Compte rendu de l'ouvrage "Environmental Justice: Key Issues", Brendan Coolsaet (ed.). Routledge, 2020, pp. 364 isbn 9780367139933

Abstract Plant competitive interactions influence the effect of herbicides, and the effect of competitive interactions on plant responses may be important to include in the ecological risk assessment of herbicides. In the present study the effect of competitive interactions and sublethal doses of 2 herbicides on plant species was investigated in competition experiments and fitted to empirical competition models. Two nontarget species commonly found in agroecosystems (Centaurea cyanus L. and Silene noctiflora L.) and 2 herbicides (glyphosate and metsulfuron methyl) were used in separate experiments. Plants were sprayed at the 6- to 8-leaf stage. Effects of herbicide treatments and plant density were modeled by generalization of a discrete hyperbolic competition model. The 10% effective dose (ED10) was calculated for C. cyanus. All experiments showed that as density increased, plants were negatively affected. Furthermore, in all cases, C. cyanus remained a better competitor than S. noctiflora. Nevertheless, the density of S. noctiflora (competitor) was an influential element in determining the ED10 of C. cyanus measured at the mature stage. With herbicide exposure, the competitive interactions were further altered; C. cyanus was less affected by glyphosate when S. noctiflora increased to high density. In contrast, at the young stage, conspecific density was important in determining the sensitivity of C. cyanus to metsulfuron methyl, whereas the density of the competitor S. noctiflora had a limited influence. Overall, the results demonstrate the importance of integrating the effect of herbicide and species interactions measured at the reproductive stage into the ecological risk assessments of pesticides. Environ Toxicol Chem 2019;38:2053–2064. © 2019 SETAC.

Engineered cementitious composites (ECCs) are special types of fibre-reinforced cementitious composites (FRCC) with higher strain capacity which can be achieved with low fibre volume as low as 2% and total elimination of coarse aggregates. Due to the outstanding performance of ECCs, they are suitable for various construction and repair applications. However, in order for ECCs to achieve their properties; a high amount of binder which is primarily composed of Portland cement (PC) is used alongside a special type of ultrafine silica sand (USS) which is different from the conventional natural fine aggregates. The production of PC is known to be detrimental to the environment due to its high carbon dioxide emissions coupled with the high consumption of natural resources. Thus, the high use of PC content in ECCs posed a sustainability threat. Similarly, the USS used in ECCs are not readily available everywhere and are expensive. The processing of the USS coupled with its transportation over long distances would also increase the cost and embodied carbon of ECCs. Hence, in order to promote more development and applications of ECCs for various applications; this dissertation aims to provide innovative ways to improve the sustainability of ECCs and their performances. This dissertation offers four solutions to improve the sustainability of ECCs which are (i) use of unconventional industrial by-products as partial replacement of PC (ii) total replacement of PC in ECCs with alternative sustainable binders (iii) replacement of USS in ECCs with recycled materials and (iv) the use of supplementary cementitious materials to replace a high volume of PC. The findings from this study revealed sustainable ECCs with acceptable mechanical and durability performance can be achieved with the use of alternative binders or replacement of the conventional USS used in ECC mixtures. The sustainability and cost assessment of the ECCs indicated that the incorporation of industrial by-products such as blast furnace slag (BFS) especially at higher content is beneficial to reducing the negative environmental impact and economic burden associated with ECCs compared to the conventional ECC. The sustainability index and cost index of the ECCs further showed that the use of BFS is more beneficial when the sustainability and cost of the ECCs are compared with the corresponding performance. Similarly, the use of recycled materials as an alternative to USS was found to result in a significant reduction in the embodied carbon and cost of ECCs. The use of recycled materials such as expanded glass (EG) as aggregates in ECCs was also found to improve the thermal insulation properties of ECCs making such ECC suitable for the production of building envelope elements.

The rotary regenerator (also called the heat wheel) is an important component of energy intensive sectors, which is used in many heat recovery systems. In this paper, a model-based analysis of a rotary regenerator is carried out with a major emphasis given to the development and implementation of mathematical models for the thermal analysis of the fluid and wheel matrix. The effect of heat conduction in the direction of the fluid flow is taken into account and the influence of variations in rotating speed of the wheel as well as other characteristics (ambient temperature, airflow and geometric size) on dynamic responses are analysed. The numerical results are compared with experimental measurements and with theoretical predications of energy efficiencies. (c) 2005 Elsevier B.V. All rights reserved.

This paper introduces an adaptive current control strategy for DC-DC boost converters without input-output voltage sensing. In addition, accurate current control is achieved in the presence of dynamical uncertainties. Unlike many controllers available for DC-DC converters, the adaptive controller's stability is guaranteed by Lyapunov stability theory. A comparison to PI counterpart has been carried out. Results show higher performance, which lead to more efficient operations of DC-DC converters.

A new two-stage gasifier with fixed-bed has recently been installed on CIRAD facilities in Montpellier. The pyrolysis and the gasifier units are removable. In order to characterise the pyrolysis products before their gasification, experiments were carried out, for the first time onlywith the pyrolysis unit and this paper deals with the results obtained. The biomass used is Pinus pinaster. The parameters investigated are: temperature, residence time and biomass flow rate. It has been found that increasing temperature and residence time improve the cracking of tars, gas production and char quality (fixed carbon rate more than 90%, volatile matter rate less than 4%). The increase of biomass flow rate leads to a bad char quality. The efficiency of tar cracking, the quality and the heating value of the charcoal and the gases, indicate that: temperature between 650 °C and 750 °C, residence time of 30 min, biomass flow rate between 10 and 15 kg/h should be the most convenient experimental conditions to get better results from the experimental device and from the biomass pyrolysis process. The kinetic study of charcoal generation shows that the pyrolysis process, in experimental conditions, is a first-order reaction. The kinetic parameters calculated are comparable with those found by other researchers. (Resume d'auteur)

Abstract Wood pellets were pyrolyzed using a microwave oven and different microwave power, apparatus set-up and microwave absorbers (none, Fe, and carbon). Pyrolysis was realized in a short time in the presence of Fe or carbon while it was incomplete if the absorber was not present. Furthermore when the absorber was present the shape of the pellets remained unaltered while if the absorber was not employed pellets were disaggregated. Three fractions were collected from each pyrolysis: a gas, a liquid also called bio-oil and a solid called bio-char. The bio-oil contained two phases and they were quantitatively characterized through a GC/MS-FID procedure using an internal standard according to a previously reported method. HPLC/MS, FTIR and 1 H NMR spectroscopy were also employed for characterization of these liquids. Cellulose pyrolysis products were present in the upper phase such as water, acetic acid, furans (such as furfural), carbohydrates and their derivatives. Compounds from pyrolysis of lignin such as phenols and veratric acid were present in the bottom phase. The microwave assisted pyrolysis showed the possibility to efficiently convert wood pellets in different products. The main economical important components may be separated and used as chemicals, natural drugs or pesticides, while the remaining components, the solid and the gas may be used for energy production (solid and bio-oil). Solid may be also used for carbon sequestration.

Dual active bridge converters enable bidirectional power flow in buck and boost operating modes. This paper presents an advanced switching sequence and burst-mode strategy to balance conduction, switching, and magnetic losses under light, medium, and heavy loading conditions, leading to improved operating efficiency. The implementation of the switching sequence employs the natural state-plane trajectories of the converter and contributes to higher efficiency and the ability to perform burst mode. The proposed switching sequences improve the overall efficiency of the converter by enabling soft switching and adjusting the frequency to match the minimum RMS transformer current in the full operating range. Furthermore, it incorporates a fully controlled burst-mode switching sequence for light loading conditions to further extend the efficiency gains. As a result, maximum efficiency is obtained by taking advantage of all the possible switching structures of the converter. The analysis provides insight into the natural trajectories of the converter, which produce soft-switching transitions and enable the converter structures to achieve the target operating point directly. Simulation and experimental results are presented to validate the benefits of the switching sequence and illustrate the burst-mode operation.

<p>The non-perennial streams and rivers are predominant in the Mediterranean region and play an important ecological role in the ecosystem diversity in this region. This class of streams is particularly vulnerable to climate change effects that are expected to amplify further under most climatic projections. Understanding the potential response of the hydrologic regime attributes to climatic stress helps in planning better conservation and management strategies. Bouregreg watershed (BW) in Morocco, is a strategic watershed for the region with a developed non-perennial stream network, and with typical assets and challenges of most Mediterranean watersheds. In this study, a hybrid modeling approach, based on the Soil and Water Assessment Tool (SWAT) model and Indicator of Hydrologic Alteration (IHA) program, was used to simulate the response of BW's stream network to climate change during the period: 2035-2050. Downscaled daily climate data from the global circulation model CNRM-CM5 were used to force the hybrid modeling framework over the study area. Results showed that, under the changing climate, the magnitude of the alteration will be different across the stream network; however, almost the entire flow regime attributes will be affected. Under the RCP8.5 scenario, the average number of zero-flow days will rise up from 3 to 17.5 days per year in some streams, the timing of the maximum flow was calculated to occur earlier by 17 days than in baseline, and the timing of the minimal flow should occur later by 170 days in some streams. The used modeling approach in this study contributed in identifying the most vulnerable streams in the BW to climate change for potential prioritization in conservation plans.</p>