• Energy Research
• 2021-2025close
• Closed Access close
• Open Source close
• IR close
• CA close

Abstract This research attempted to analyze a triple-tube heat exchanger (TTHE) fitted with innovative crimped-spiral ribs to enhance thermal efficiency. The crimped-spiral rib was placed on the top of the internal tube, and the water–alumina nanofluid was employed as the hot fluid within the ribbed side, whereas the two other fluids were pure water. The numerical solutions were performed through the two-phase mixture method, while the turbulent flow was modeled via the Reynolds Stress Model (RSM). The overall heat transfer coefficient (U), heat transfer rate, effectiveness, and performance index enhanced remarkably by using the nanofluid. The greatest increment in the U and effectiveness reached around 44.91 and 41 %, respectively, by the increment of the volume fraction by 0.02. The crimp intensity had an appreciable contribution to the thermal performance. The main mechanism was stronger swirl flow generated by the crimped-spiral rib that yielded boundary layer destruction. The heat transfer capability was increased via the rib pitch decrement and rib height increment. The performance index showed great values even at low volume fractions, which manifested the great merit of the implemented refinements. The thermal attributes were investigated at the first of the result section and then, the hydraulic characteristics were researched.

Abstract Gas cyclone separators have been widely used in different industries. In this study, to find the best geometrical ratios of Stairmand cyclone separator, computational fluid dynamics (CFD), design of experiments (DOE), multi-gene genetic programming (MGGP), and ten meta-heuristic algorithms were combined. Six geometrical dimensions of the gas cyclone separator including inlet height and width, vortex finder length and its diameter, cylinder height and cone-tip diameter were optimized. The obtained models from MGGP were optimized by ten meta-heuristic algorithms and non-dominated Pareto fronts were analyzed using six unary and binary metrics and PROMETHEE II as a decision making method. According to the optimization results, multi-objective Particle Swarm Optimization (MOPSO) showed the best performance and generated more preferred designs than Stairmand design compared to other algorithms. These preferred designs increased the collection efficiency within 0.36 to 6% and decreased the pressure drop within 3.3 to 27.5% compared to the Stairmand.

Abstract Economically harvesting energy from a microbial fuel cell (MFC), increasing its electrical power production, and developing its role as a practical energy supply, needs a low-cost and high-performance design of the MFC compartments. According to this strategy, a novel monolithic membrane electrode assembly (MEA) was fabricated and evaluated as an air–cathode in a single-chamber MFC (SCMFC). The MEA was made of bacterial cellulose (BC), conductive multi-walled carbon nanotubes (CNT), and nano-zycosil (NZ). BC, as a nano-celluloses with oxygen barrier property, can maintain anaerobic conditions for the anode compartment. Binder-less CNT coating on BC avoids costly binders such as poly-tetra fluoro ethylene (PTFE) and Nafion and decreases the MEA charge transfer resistance. NZ, as a very cheap modifier, not only prevents the anolyte leakage but also provides more MEA’s active sites for the oxygen reduction reaction (ORR). The electrochemical performance of the MEA was compared to a PTFE- based gas diffusion electrode (GDE) in the SCMFC. The MEA cell provided a pulse power density of 1790 mW/m2, roughly twice as high as the pulse power density of GDE (920 mW/m2). SCMFC’s internal resistance decreased from 1.84 KΩ (with GDE) to 0.8 KΩ (with MEA). Also, the cell’s columbic efficiency increased from 4.2% (with GDE) to11.7% (with MEA). Additionally, the capacitance of the MEA (65 mF) was much higher than the value for GDE (0.73 mF). Thus, the MEA compared to the GDE showed higher performance in the SCMFC for electricity generation and wastewater treatment at a lower cost.

This is a file with a CSV extension that contains 3,049 citation data in the field of building energy simulation, extracted from the Scopus citation database. Researchers have used this file to conduct bibliometric research. Citation data searched in Scopus is screened based on the PRISMA protocol checklist. This is a file with a CSV format that contains 3,049 citation data in the field of energy simulation, extracted from the Scopus citation database. Researchers have used this file to conduct bibliometric research.

The fast decay in PEM fuel cells of a highly active, high performance, but unstable Fe/N/C catalyst like our NC_Ar + NH3 follows a chemical, not an electrochemical, demetallation mechanism for its ORR active FeN4 sites in the catalyst micropores.

AbstractConcrete is a valuable construction material with high mechanical strength and durability, used extensively in the construction industry. It is produced by mixing sand, stones, cement, and water in different proportions depending on the desired quality of the final product. Water reducers are additional chemical ingredients used in concrete to reduce the quantity of water required in the concrete mixture. When added to concrete, water reducers increase the workability and flowability of concrete in the freshly mixed state and improve the mechanical strength and durability of the final hardened product. This review paper describes the different types and applications of concrete water reducers used in the construction industry including their working mechanisms and fluidity effects on concrete properties. It discusses the production of synthetic and bio‐based concrete water reducers and reviews the present challenges involved in the preparation of bio‐based concrete water reducers from renewable resources. © 2023 Society of Industrial Chemistry and John Wiley & Sons Ltd.

Ethanol is associated with oxidative stress. Exposure to ethanol during childhood may lead to neurological disorders. Congenital disorders induced by alcohol are mainly caused by an oxidative-inflammatory cascade due to extensive apoptotic neurodegeneration in the brain, particularly in the hippocampus. Simvastatin, which acts as an inhibitor of 3-hydroxy-3-methylglutaryl coenzyme A (HMG-CoA), is widely used to manage cardiovascular diseases. Recently, the neuroprotective effects of simvastatin against nervous system disorders have been introduced. In this study, we examined the protective effects of simvastatin on ethanol-related neurotoxicity in the hippocampus of rat pups. Ethanol (5.27 g/kg) in a milk solution (27.8 mL/kg) was administered to male rat pups via intragastric intubation at 2-10 days after birth. Also, 10 and 20 mg/kg of simvastatin were injected to the animals. By using Morris water maze task, the hippocampus-dependent memory and spatial learning was evaluated 36 days after birth. An ELISA assay was performed to investigate the antioxidant and anti-inflammatory effects of simvastatin by measuring the levels of tumor necrosis factor-α (TNF-α), and antioxidant enzymes. To assess the expression levels of Iba1 immunohistochemical staining and caspase-3 immunofluorescence staining was performed. The current study demonstrated that administration of simvastatin significantly attenuates spatial memory impairment (P < 0.01) after ethanol neurotoxicity. Also simvastatin could considerably increase the total superoxide dismutaseand glutathione levels (P < 0.01). Moreover, it was associated with a greater reduction in malondialdehyde (P < 0.05) and TNF-α levels, compared to the ethanol group (P < 0.01). Furthermore, in the simvastatin group, the hippocampal level of caspase-3 and the level of Iba1-positive cells, reduced (P < 0.01). This study demonstrated that apoptotic signaling, mediated by the oxidative-inflammatory cascade, could be inhibited by simvastatin in rat pups with ethanol exposure in the postnatal period.