• Energy Research
• Restricted close
• Open Source close
• Embargo close
• 11. Sustainability close
• 12. Responsible consumption close
• ES close
• CA close
• PL close

The building and construction sector is a large contributor to anthropogenic greenhouse gas emissions and consumes vast natural resources. Improvements in this sector are of fundamental importance for national and global targets to combat climate change. In this context, vertical greenery systems (VGS) in buildings have become popular in urban areas to restore green space in cities and be an adaptation strategy for challenges such as climate change. However, only a small amount of knowledge is available on the different VGS environmental impacts. This paper discusses a comparative life cycle assessment (LCA) between a building with green walls, a building with green facades and a reference building without any greenery system in the continental Mediterranean climate. This life cycle assessment is carried according to ISO 14040/44 using ReCiPe and GWP indicators. Moreover, this study fills this gap by thoroughly tracking and quantifying all impacts in all phases of the building life cycle related to the manufacturing and construction stage, maintenance, use stage (operational energy use experimentally tested), and final disposal. The adopted functional unit is the square meter of the facade. Results showed that the operational stage had the highest impact contributing by up to 90% of the total environmental impacts during its 50 years life cycle. Moreover, when considering VGS, there is an annual reduction of about 1% in the environmental burdens. However, in summer, the reduction is almost 50%. Finally, if the use stage is excluded, the manufacturing and the maintenance stage are the most significant contributors, especially in the green wall system.

Artículos en revistas Liberalization policies, the challenges of integrating distributed generation resources, and the recent flattening of electricity demand due to the economic crisis and technological change have led to lower returns for European electricity suppliers. Innovative and sustainable business models are needed to serve electricity customers while reflecting the operational needs of the system and maintaining supplier financial viability. This paper describes a novel model of Integrated Energy Services that encompasses distributed generation (DG) and demand response (DR) resources for industrial customers. We further reflect on some of the market opportunities and regulatory drivers for the development of similar schemes across Europe. info:eu-repo/semantics/publishedVersion

A Life Cycle Assessment (LCA) with focus on carbon footprint, followed by Life Cycle Costing (LCC) of municipal solid waste (MSW) management were conducted in a residential area of a medium-sized European city of 80,000 inhabitants. The initial results showed high environmental impacts and lack of economic sustainability, due to the high amounts of waste landfilled, the low extent of separate collection, low performance of mechanical-biological treatment as well as absence from alternatives to landfilling of non-recyclable materials. Taking this result as a baseline scenario, three improvement.s were tested with the aim of turning the carbon footprint of the local MSW management system into a neutral value: (i) increased separate collection of recyclables, (ii) enhanced biogas production and (iii) refuse-derived fuel (RDF) production. Successively adding the improvements, three alternative improved scenarios were defined, until reaching a negative carbon footprint, meaning that an optimised system would avoid GHG emissions. The proposed changes were sufficient to achieve carbon neutrality, as well as reduce overall environmental impacts, but were not enough for achieving economic sustainability due to the great influence of collection costs, especially for separate collection. It was concluded that by using an adequate combination of several treatment options and increasing the separate collection of recyclable materials it is possible to turn MSW management into a carbon neutral activity as well as improve its economic balance.

The potential impacts of climate change on human health in sub-Saharan Africa are wide-ranging, complex, and largely adverse. The region's Indigenous peoples are considered to be at heightened risk given their relatively poor health outcomes, marginal social status, and resource-based livelihoods; however, little attention has been given to these most vulnerable of the vulnerable. This paper contributes to addressing this gap by taking a bottom-up approach to assessing health vulnerabilities to climate change in two Batwa Pygmy communities in rural Uganda. Rapid Rural Appraisal and PhotoVoice field methods complemented by qualitative data analysis were used to identify key climate-sensitive, community-identified health outcomes, describe determinants of sensitivity at multiple scales, and characterize adaptive capacity of Batwa health systems. The findings stress the importance of human drivers of vulnerability and adaptive capacity and the need to address social determinants of health in order to reduce the potential disease burden of climate change.

Abstract The organic Rankine cycle (ORC) has been growing in importance as a technology for producing electricity from low temperature waste and renewable heat sources. In small-scale applications, the most used working fluid has been HFC-245fa, although this is being substituted for low GWP alternatives. A new HCFO working fluid, HCFO-1224yd(Z), has appeared as a possible alternative for HFC-245fa. In this study, this alternative working fluid is analysed and, finally, the working fluid is experimentally tested as drop-in alternative in a commercial ORC system. The main purpose is to determine the feasibility of using HCFO-1224yd(Z) as a drop-in replacement for HFC-245fa in a real facility that was initially designed to operate with HFC-245fa. The results show how the use of HCFO-1224yd(Z) offers power output that ranges from 7.5% to 17.4% lower than that provided by HFC-245fa. Although HFC-245fa offers higher power output, the results show that HCFO-1224yd(Z) offers up to 7.7% higher cycle net efficiency; this is due to the higher input thermal rate required by HFC-245fa. Finally, HCFO-1224yd(Z) has been stated as a suitable alternative to HFC-245fa as a drop-in replacement in a small-scale, low-temperature ORC, which increases its attractiveness for heat source with higher temperatures.

Capítulos en libros This paper assesses the scalability and replicability of smart grid projects, by means of the identification of limitations and barriers faced by these projects. Factors have been identified that impact a project s scalability and replicability by means of a review of demonstration projects. The factors are of technical, economic, regulatory and social acceptance nature, and they describe requirements for scalability and replicability. Data was collected from ongoing European smart grid demonstration projects through the use of an elaborated questionnaire on the identified factors. Which allowed to quantify the status quo to what extent projects have taken these factors into account. Dew to their nature the derived factors can be categorized in technical, economic and regulatory & stakeholder related factor areas The obtained results allowed the identification of barriers, i.e. limitations regarding the scalability and replicability of smart grid projects. In particular projects face barriers regarding the absence of standards, the physical limits of the existing infrastructure, the absence of cost-benefit analyses, the neglect of varying macro-economic factors, stakeholder involvement and from the dependency of projects on regional or national regulatory frameworks and market designs. info:eu-repo/semantics/publishedVersion

Engineered cementitious composites (ECCs) are special types of fibre-reinforced cementitious composites (FRCC) with higher strain capacity which can be achieved with low fibre volume as low as 2% and total elimination of coarse aggregates. Due to the outstanding performance of ECCs, they are suitable for various construction and repair applications. However, in order for ECCs to achieve their properties; a high amount of binder which is primarily composed of Portland cement (PC) is used alongside a special type of ultrafine silica sand (USS) which is different from the conventional natural fine aggregates. The production of PC is known to be detrimental to the environment due to its high carbon dioxide emissions coupled with the high consumption of natural resources. Thus, the high use of PC content in ECCs posed a sustainability threat. Similarly, the USS used in ECCs are not readily available everywhere and are expensive. The processing of the USS coupled with its transportation over long distances would also increase the cost and embodied carbon of ECCs. Hence, in order to promote more development and applications of ECCs for various applications; this dissertation aims to provide innovative ways to improve the sustainability of ECCs and their performances. This dissertation offers four solutions to improve the sustainability of ECCs which are (i) use of unconventional industrial by-products as partial replacement of PC (ii) total replacement of PC in ECCs with alternative sustainable binders (iii) replacement of USS in ECCs with recycled materials and (iv) the use of supplementary cementitious materials to replace a high volume of PC. The findings from this study revealed sustainable ECCs with acceptable mechanical and durability performance can be achieved with the use of alternative binders or replacement of the conventional USS used in ECC mixtures. The sustainability and cost assessment of the ECCs indicated that the incorporation of industrial by-products such as blast furnace slag (BFS) especially at higher content is beneficial to reducing the negative environmental impact and economic burden associated with ECCs compared to the conventional ECC. The sustainability index and cost index of the ECCs further showed that the use of BFS is more beneficial when the sustainability and cost of the ECCs are compared with the corresponding performance. Similarly, the use of recycled materials as an alternative to USS was found to result in a significant reduction in the embodied carbon and cost of ECCs. The use of recycled materials such as expanded glass (EG) as aggregates in ECCs was also found to improve the thermal insulation properties of ECCs making such ECC suitable for the production of building envelope elements.

ABSTRACTDifferent tourism development models have different implications in terms of their economic, social and environmental impact. This article analyses the sustainability of tourism development...

Thermophilic co-digestion of sewage sludge with three different doses of trapped grease waste (GW) from the pre-treatment of a WWTP has been assessed in a CSTR bench-scale reactor. After adding 12% and 27% of grease waste (on COD basis), the organic loading rate increased from 2.2 to 2.3 and 2.8 kgCOD m-3 d-1 respectively, and the methane yield increased 1.2 and 2.2 times. Further GW increase (37% on COD basis) resulted in an unstable methane yield and in long chain fatty acids (LCFA) accumulation. Although this inestability, the presence of volatile fatty acids in the effluent was negligible, showing good adaptation to fats of the thermophilic biomass. Nevertheless, the presence of LCFA in the effluent worsens its dewatering properties. Specific methanogenic activity tests showed that the addition of grease waste ameliorates the acetoclastic activity in detriment of the hydrogenotrophic activity, and suggests that the tolerance to LCFA can be further enhanced by slowly increasing the addition of lipidrich materials.