• Energy Research
• Embargo close
• CA close
• PL close

Engineered cementitious composites (ECCs) are special types of fibre-reinforced cementitious composites (FRCC) with higher strain capacity which can be achieved with low fibre volume as low as 2% and total elimination of coarse aggregates. Due to the outstanding performance of ECCs, they are suitable for various construction and repair applications. However, in order for ECCs to achieve their properties; a high amount of binder which is primarily composed of Portland cement (PC) is used alongside a special type of ultrafine silica sand (USS) which is different from the conventional natural fine aggregates. The production of PC is known to be detrimental to the environment due to its high carbon dioxide emissions coupled with the high consumption of natural resources. Thus, the high use of PC content in ECCs posed a sustainability threat. Similarly, the USS used in ECCs are not readily available everywhere and are expensive. The processing of the USS coupled with its transportation over long distances would also increase the cost and embodied carbon of ECCs. Hence, in order to promote more development and applications of ECCs for various applications; this dissertation aims to provide innovative ways to improve the sustainability of ECCs and their performances. This dissertation offers four solutions to improve the sustainability of ECCs which are (i) use of unconventional industrial by-products as partial replacement of PC (ii) total replacement of PC in ECCs with alternative sustainable binders (iii) replacement of USS in ECCs with recycled materials and (iv) the use of supplementary cementitious materials to replace a high volume of PC. The findings from this study revealed sustainable ECCs with acceptable mechanical and durability performance can be achieved with the use of alternative binders or replacement of the conventional USS used in ECC mixtures. The sustainability and cost assessment of the ECCs indicated that the incorporation of industrial by-products such as blast furnace slag (BFS) especially at higher content is beneficial to reducing the negative environmental impact and economic burden associated with ECCs compared to the conventional ECC. The sustainability index and cost index of the ECCs further showed that the use of BFS is more beneficial when the sustainability and cost of the ECCs are compared with the corresponding performance. Similarly, the use of recycled materials as an alternative to USS was found to result in a significant reduction in the embodied carbon and cost of ECCs. The use of recycled materials such as expanded glass (EG) as aggregates in ECCs was also found to improve the thermal insulation properties of ECCs making such ECC suitable for the production of building envelope elements.

In industrialized countries, large amounts of mineral wastes are produced. They are re-used in various ways, particularly in road and earth constructions, substituting primary resources such as gravel. However, they may also contain pollutants, such as heavy metals, which may be leached to the groundwater. The toxic impacts of these emissions are so far often neglected within Life Cycle Assessments (LCA) of products or waste treatment services and thus, potentially large environmental impacts are currently missed. This study aims at closing this gap by assessing the ecotoxic impacts of heavy metal leaching from industrial mineral wastes in road and earth constructions. The flows of metals such as Sb, As, Pb, Cd, Cr, Cu, Mo, Ni, V and Zn originating from three typical constructions to the environment are quantified, their fate in the environment is assessed and potential ecotoxic effects evaluated. For our reference country, Germany, the industrial wastes that are applied as Granular Secondary Construction Material (GSCM) carry more than 45,000 t of diverse heavy metals per year. Depending on the material quality and construction type applied, up to 150 t of heavy metals may leach to the environment within the first 100 years after construction. Heavy metal retardation in subsoil can potentially reduce the fate to groundwater by up to 100%. One major challenge of integrating leaching from constructions into macro-scale LCA frameworks is the high variability in micro-scale technical and geographical factors, such as material qualities, construction types and soil types. In our work, we consider a broad range of parameter values in the modeling of leaching and fate. This allows distinguishing between the impacts of various road constructions, as well as sites with different soil properties. The findings of this study promote the quantitative consideration of environmental impacts of long-term leaching in Life Cycle Assessment, complementing site-specific risk assessment, for the design of waste management strategies, particularly in the construction sector.

An important limitation of polymer electrolyte fuel cell technology is the low mechanical strength and dimensional instability with changes of water content of proton exchange membranes (PEMs). A range of different approaches to more stable PEMs based on Nafion have been studied of which composite materials of Nafion with mechanically stronger polymers is one of the most promising directions. If successful, they will lead to thinner composite PEMs with enhanced fuel cell performance, life span, and cost-effectiveness. Developed in this thesis are electrospinning conditions for the fabrication of electrospun mats for potential application in PEMs. Polysulfone (PSU), poly vinylidene fluoride-co-hexafluoropropylene (PVDF-HFP), and polyvinylidene fluoride (PVDF) were tested as mechanically stronger but inert (minimal contribution to proton transport) polymers that can tolerate the fuel cell condition. PVDF-HFP generated defect free electrospun mats over a wide range of spinning conditions, while PSU required very specific conditions and no successful conditions were found for PVDF mostly due to over-wetting. These mats might function as mechanical support and could be tested as PEMs when filled with Nafion, but the complete filling of electrospun mats with Nafion has been proven difficult. Instead, the electrospinning of Nafion was tested to explore options of electrospinning mixed mats of two different polymers and co-electrospinning of core-sheath fibers. Two commercial Nafion solutions D520 and D2020 with 5 wt% and 20 wt% content of Nafion were electrospun together with polyethylene oxide of two different molecular weights as a carrier polymer. Mats of sufficient quality for PEM tests were obtained with solutions based on 20 wt% content of Nafion, a low flow rate of 0.2 mL/h, and the lower molecular weight polyethylene oxide as the carrier. Finally, coaxial electrospinning conditions for the formation of core-sheath fibers were developed for Nafion as sheath material and PVDF-HFP or PSU as the core material. Defect-free, core-sheath fibers were generated when the concentration of both solutions was high (20 wt%), the Nafion flow rate was about 0.2 mL/h for the sheath, and the core flow rate was below the flow rate of the sheath (0.1-0.15 mL/h for PVDF-HFP and 0.15 mL/h for PSU). Mats of these core-sheath fibers should provide good mechanical strength combined with much better compatibility with Nafion. A straightforward pore filling with Nafion solutions is expected and their investigation as PEMs in fuel cells is planned as future work.

The stability of winter wheat-flowering-date is crucial for ensuring consistent and robust crop performance across diverse climatic conditions. However, the impact of climate change on wheat-flowering-dates remains uncertain. This study aims to elucidate the influence of climate change on wheat-flowering-dates, predict how projected future climate conditions will affect flowering date stability, and identify the most stable wheat genotypes in the study region. We applied a multi-locus genotype-based (MLG-based) model for simulating wheat-flowering-dates, which we calibrated and evaluated using observed data from the Northern China winter wheat region (NCWWR). This MLG-based model was employed to project flowering dates under different climate scenarios. The simulated flowering dates were then used to assess the stability of flowering dates under varying allelic combinations in projected climatic conditions. Our MLG-based model effectively simulated flowering dates, with a root mean square error (RMSE) of 2.3 days, explaining approximately 88.5 % of the genotypic variation in flowering dates among 100 wheat genotypes. We found that, in comparison to the baseline climate, wheat-flowering-dates are expected to shift earlier within the target sowing window by approximately 11 and 14 days by 2050 under the Representative Concentration Pathways 4.5 (RCP4.5) and RCP8.5 climate scenarios, respectively. Furthermore, our analysis revealed that wheat-flowering-date stability is likely to be further strengthened under projected climate scenarios due to early flowering trends. Ultimately, we demonstrate that the combination of Vrn and Ppd genes, rather than individual Vrn or Ppd genes, plays a critical role in wheat-flowering-date stability. Our results suggest that the combination of Ppd-D1a with winter genotypes carrying the vrn-D1 allele significantly contributes to flowering date stability under current and projected climate scenarios. These findings provide valuable insights for wheat breeders and producers under future climatic conditions.

AbstractThis study describes the relationships between climate change and the concept of a circular economy, outlining the need for synergies within a company's context. It reports on a bibliometric analysis of the relations between climate change and circular economy, and it provides evidence and assessments based on a sample of 11 large companies in the chemical industry. The results show that there is a concern in the academic literature to discuss circular economy efforts to combat climate change, reduce carbon emissions, strengthen the supply chain, assess the life cycle of products, their environmental impact, and waste management, and identify barriers to implementing the circular economy. In addition, there is a close association between the CE concept and tackling climate change in how organisations report their practices to the stakeholders, in considering concepts of recycling, reusing, adopting renewable energy, seeking resource efficiency, and rethinking strategies. The study concludes by providing some suggestions that may assist companies in intensifying their efforts to reduce their carbon footprint, combining them with more circular business models. Efforts from interested stakeholders must focus on defining CE in a more detailed manner, as well as its implementation at the different stages of production and consumption, especially in operations for which no uniform approach or common practice can be established. In this context, implications for positive social and environmental impacts by promoting a faster and more proactive climate transition in the chemical sector are presented. The novelty of this paper relies on the fact that it advances knowledge on matters related to the circular economy under a climate change context, identifying current trends and suggesting some measures which may optimise current business practices of the chemical sector.

Some Parties (Countries) to the UNFCCC decided to include the carbon uptake by harvested wood products (HWP) in a new general accounting framework after 2012 (post Kyoto). The analysis aims to make a comparison between the cascaded use of HWP and the use of wood for energy. We combine the new HWP framework with an assumed increased 50 million m3harvest level in Canada and evaluate the impact of the GHG emissions over a 100-year period. Our reference case assumes all harvested wood is an immediate CO2emission (IPCC default) and no substitution effects, i.e. annual GHG emissions of 41 million tonnes CO2eq. In our wood utilization scenario's, harvested trees are allocated (in varying shares) to three end-products: construction wood, paper products and pellets for power production. In comparison with our base case, a combination of fossil fuel substitution, material substitution and temporary carbon uptake by HWP leads to significant decreases in GHG emissions. All scenario's show annual GHG emission between 18 and 21 million tonnes CO2eqexcept for triple use without recycling (at least 24 million tonnes CO2eq). We conclude that GHG emissions of our scenarios are substantially lower than IPCC default. However, it is difficult to incorporate one single method to account for GHG uptake and emissions by HWP, due to end use efficiency and recycling options. Further GHG allocation over individual countries is not straightforward and needs further research. © 2013 Elsevier Ltd.

AbstractThis study investigates the potential recognition and engagement of the natural environment as an important factor in strategic investment decisions by accommodation suppliers in a small island context. The investigation, based on empirical data from two Thai islands, Koh Tao and Koh Phi Phi, contributes to the debate if the environment, by focusing on climate change, can be identified as a primary stakeholder for accommodation suppliers. The findings show that strategic investment decisions are influenced by impacts commonly associated with climate change, although a conscious recognition of climate change as a strategic stakeholder or important factor in strategic investment decisions could not be confirmed. Conversely, the element of unconsciousness in the process of recognising climate change in investment decisions sparks questions regarding the degree to which the recognition of business stakeholders requires being a conscious process and if the focus on investments could be another element for stakeholder identification frameworks for businesses.

Renewable energy projects, such as wind farms and hydropower dams, can indirectly benefit biodiversity by mitigating climate change. However, we explain why such indirect benefits should not contribute towards the accounting of project-level net biodiversity outcomes and provide guidance on the steps needed to legitimately claim no-net-loss of biodiversity.