• Energy Research
• CA close
• Université Laval close

Recycled polylactic acid (PLAr) was reinforced with treated nanocellulosic hemp fibers for biocomposite fabrication. Cellulosic fibers were extracted from hemp fibers chemically and treated enzymatically. Treated nanocellulosic fibers (NCF) were analyzed by Fourier-transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy. Biocomposite fabrication was done with PLAr and three concentrations of treated NCF (0.1%, 0.25%, and 1% (v/v)) and then studied for thermal stability and mechanical properties. Increased thermal stability was observed with increasing NCF concentrations. The highest value for Young’s modulus was for PLAr + 0.25% (v/v) NCF (250.28 ± 5.47 MPa), which was significantly increased compared to PLAr (p = 0.022). There was a significant decrease in the tensile stress at break point for PLAr + 0.25% (v/v) NCF and PLAr + 1% (v/v) NCF as compared to control (p = 0.006 and 0.002, respectively). No significant difference was observed between treatments for tensile stress at yield.

Recycled polylactic acid (PLAr) was reinforced with treated nanocellulosic hemp fibers for biocomposite fabrication. Cellulosic fibers were extracted from hemp fibers chemically and treated enzymatically. Treated nanocellulosic fibers (NCF) were analyzed by Fourier-transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy. Biocomposite fabrication was done with PLAr and three concentrations of treated NCF (0.1%, 0.25%, and 1% (v/v)) and then studied for thermal stability and mechanical properties. Increased thermal stability was observed with increasing NCF concentrations. The highest value for Young’s modulus was for PLAr + 0.25% (v/v) NCF (250.28 ± 5.47 MPa), which was significantly increased compared to PLAr (p = 0.022). There was a significant decrease in the tensile stress at break point for PLAr + 0.25% (v/v) NCF and PLAr + 1% (v/v) NCF as compared to control (p = 0.006 and 0.002, respectively). No significant difference was observed between treatments for tensile stress at yield.

Co-simulation of heterogeneous systems allows for in-depth analysis of various aspects of power systems’ operation while staying within the environments of the simulation tools that are best fit to represent their respective domains. Equipped with a proprietary co-simulation platform, the paper focuses on the issue of power-conjugate coupling between parts of power grids modeled in transient stability and electromagnetic transient simulation tools. The problems of co-simulation stability and precision in presence of delays are tackled by means of designing a proper coupling interface. It is shown that two established interface methods – the V-I method and the Transmission Line Interface – are special cases of a generalized interface framework proposed in the paper. Moreover, a new interface algorithm is described by parametrizing the generalized framework. Analytical tools are also formulated to aid in the analysis of interface stability and precision via the concepts of passivity and transparency. Simulation results of benchmark systems of various complexity demonstrate the application of the developed power coupling interface.

Co-simulation of heterogeneous systems allows for in-depth analysis of various aspects of power systems’ operation while staying within the environments of the simulation tools that are best fit to represent their respective domains. Equipped with a proprietary co-simulation platform, the paper focuses on the issue of power-conjugate coupling between parts of power grids modeled in transient stability and electromagnetic transient simulation tools. The problems of co-simulation stability and precision in presence of delays are tackled by means of designing a proper coupling interface. It is shown that two established interface methods – the V-I method and the Transmission Line Interface – are special cases of a generalized interface framework proposed in the paper. Moreover, a new interface algorithm is described by parametrizing the generalized framework. Analytical tools are also formulated to aid in the analysis of interface stability and precision via the concepts of passivity and transparency. Simulation results of benchmark systems of various complexity demonstrate the application of the developed power coupling interface.

Mineral weathering plays an important role in poor-nutrient environments such as mine spoils and tailings. Ectomycorrhizal (ECM) fungi are able to enhance mineral weathering through different mechanisms, thereby increasing the availability of minerals and nutrients to plants. Six ECM fungi (Cadophora finlandia, Cenococcum geophilum, Hebeloma crustuliniforme, Lactarius aurantiosordidus, Paxillus involutes, and Tricholoma scalpturatum) were tested here for their tolerance to biotite-quartz-rich mine tailings. Either solid- or liquid-medium methods were used for in vitro selection of ECM fungi for their ability to grow on mine tailings. ECM fungi were selected based on their mycelial radial growth and metabolite production (ergosterol and low-molecular-mass organic acids, LMMOAs). We found a strong correlation between fungal ergosterol content and mycelial radial growth using the solid-medium method. However, the liquid-medium method was more appropriate for ergosterol synthesis and permitted direct measurement of organic acid production. We found that LMMOAs were exuded by ECM fungi, which solubilized mine tailings for their own growth and nutrition. Finally, we concluded that the ECM fungi C. finlandia and T. scalpturatum are the species most tolerant to tailings and could potentially improve the survival rate, growth, and health of white spruce seedlings planted on biotite mine spoils and tailings.

Mineral weathering plays an important role in poor-nutrient environments such as mine spoils and tailings. Ectomycorrhizal (ECM) fungi are able to enhance mineral weathering through different mechanisms, thereby increasing the availability of minerals and nutrients to plants. Six ECM fungi (Cadophora finlandia, Cenococcum geophilum, Hebeloma crustuliniforme, Lactarius aurantiosordidus, Paxillus involutes, and Tricholoma scalpturatum) were tested here for their tolerance to biotite-quartz-rich mine tailings. Either solid- or liquid-medium methods were used for in vitro selection of ECM fungi for their ability to grow on mine tailings. ECM fungi were selected based on their mycelial radial growth and metabolite production (ergosterol and low-molecular-mass organic acids, LMMOAs). We found a strong correlation between fungal ergosterol content and mycelial radial growth using the solid-medium method. However, the liquid-medium method was more appropriate for ergosterol synthesis and permitted direct measurement of organic acid production. We found that LMMOAs were exuded by ECM fungi, which solubilized mine tailings for their own growth and nutrition. Finally, we concluded that the ECM fungi C. finlandia and T. scalpturatum are the species most tolerant to tailings and could potentially improve the survival rate, growth, and health of white spruce seedlings planted on biotite mine spoils and tailings.

Polymers based on vegetable oils can be suitable candidates for the replacement of fossil polymers, for instance, polyurethanes (PU) based on castor oil. However, the synthesis PU materials are normally carried out using organic solvents, metals, and high temperatures. To overcome these problems, the sol-gel route is an alternative approach based on mild conditions to produce organic-inorganic hybrid urethanesil (Ut) environmentally friendly. Therefore, in this study, we proposed an organic-inorganic hybrid (OIH) synthesis based on castor oil (CO)-derived Ut, as well as the incorporation and interaction of europium β-diketone [Eu(tta)3(H2O)2] in organic-inorganic hybrid matrix. The Ut self-supporting hybrid was synthesized from the reaction of 3-(triethoxysilyl)propyl isocyanate (ICPTES) and CO in a 3:1 M ratio. The films were obtained using the sol-gel process, following the casting method. The CO-based OIH-Ut films showed high transmittance in the visible and infrared spectrum (90%), and urethanesil showed photoluminescence (PL) with emission at 416.0 nm when excited at 319.0 nm. The results also revealed an increase in the intrinsic quantum yield of PL (QLEu) for [Eu(tta)3(H2O)2]. It has been verified a QLEu value of 27% for the isolated complex, whereas when it is incorporated into OIH-Ut a value of 49% was observed. Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq) Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES) Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP) Processo FAPESP: 2020/03259–9 Processo FAPESP: 2022/03652–8 CAPES: 88887.499004/2020–00