• Energy Research
• Open Access close
• Open Source close
• other engineering and technologies close
• UA close
• CL close
• EC close

The paper presents an experimental study on the formation process of burden surface texture on the blast furnace throat and its influence on the radial distribution of gas flow. The study was performed with the application of blast furnaces equipped with a bell-type charging device using radio-isotope means for the control of burden surface texture (profile) and burden surface level, i.e., gamma locators for burden surface texture. The study was carried out under the conditions of an operating blast furnace in an iron and steel plant using a unique GEOTAPS system for automated control of geometric and temperature parameters of burden material surface on the blast furnace throat. The influence of the surface texture on the gas flow distribution was also investigated. The possibility of a self-stabilization effect for burden surface texture and gas flow in an operating blast furnace under suitable conditions was experimentally proven. As a result of the experimental study performed, four ways of energy-saving technology implementation were determined for the control of blast furnace melting based on the data on the burden surface texture and previously unknown regularities of surface layer formation of burden material on the throat of an operating blast furnace with a bell-type charging device. The main idea of the paper is the development of automated control for the radial distribution of burden material and gas flow using actual or predicted surface texture parameters as important intermediate factors that both describe the process and have a significant simultaneous influence on it.

AbstractEnhancing the efficiency of the electric vehicle’s powertrain becomes a crucial focus, wherein the control system for the traction motor plays a significant role. This paper presents a novel electric vehicle traction motor control system based on a robust predictive direct torque control approach, an improved version of the conventional DTC, where the traditional switching table and the hysteresis regulators are substituted with a predictive block based on an optimization algorithm. Additionally, a robust predictive speed loop regulator is employed instead of the proportional-integral regulator, which integrates a new cost function with a finite horizon, incorporating integral action into the control law based on a Taylor series expansion. This technique’s primary benefit is its independence from the necessity to measure and observe external disturbances, as well as uncertainties related to parameters. The effectiveness of the suggested system was confirmed through simulation and experimental results under the OPAL-RT platform. The findings indicate that the proposed approach outperforms the conventional method in terms of rejecting disturbances, exhibiting robustness to variations in parameters, and minimizing torque ripple.

The basic requirements for materials of modern fortifications are established and substantiated. It is established that concrete of such structures should have high strength under the influence of static loads and low modulus of deformations. To ensure the required deformability, you must use dampers. A quantitative characteristic of reinforcing steel at dynamic dynamic loads is the dynamic strengthening coefficient, which shows the growth of dynamic strength in comparison with static.

Environmental pollution as the result effluents discharged by industry is increasing, principally owing to mixtures of pollutants, including dyes. The objective of the present study was to evaluate the adsorption process of the bicomponent mixture of Tartrazine (Y5) and Brilliant Blue FCF (B1) dyes in a dynamic regime (fixed-bed column), using rice husks (RH) as adsorbent material. A 3-level response surface design of experiments was employed to evaluate the adsorption process of the dyes in the mixture at the following initial concentrations: 0.0216, 0.0739, 0.1261, 0.1477 (mmol L−1). The response surface analysis of the experimental design made it possible to identify a competitive adsorption of both dyes. RH had higher affinity for B1, although the adsorption capacity changed depending on the concentration of each dye in the mixture. The highest RH adsorption capacity was 3.4 mg g−1 for B1 and 1.45 mg g−1 for Y5, respectively, under a monocomponent condition. It was considered that the interactions in the mechanism proposed for the adsorption process occurred because of the formation of hydrogen bonds between the sulfonate groups of the dyes and the –OH groups present on the surface of the adsorbent. B1 had a higher affinity towards RH because it had one more sulfonate group than Y5. The multiple-response optimization results make it possible to recommend the use of RH beds with low concentrations of B1 and Y5 in the same feed.

This paper aims to reconsider prosumers’ role in the power markets in the early stages of their decentralization, accounting for rising self-supply trends, security threats, and economic and regulatory barriers. The development of prosumerism envisages finding the ratio between retail market sales under the feed-in tariff and the net billing mechanism. Within the methodology section, the indicator of prosumer efficiency for electricity generation (EUR/kWh) is proposed based on average consumption/production ratios and consumption/delivery incentives. To support household prosumers, the mentioned incentives on the renewable energy market consider the self-supply cost of electricity, the levelized cost of electricity for small-scale green energy facilities (solar photovoltaic and wind), and transaction costs. This paper evaluates prosumer efficiency under three consumption/production ratio scenarios for Ukrainian households (self-consumption of 40%, 20%, and 100% of green electricity annually generated by a household and selling the leftovers via the feed-in tariff) for 2023. The gradual movement from fixed tariffs for households toward market-based prices promotes the emergence of new related market players and their consolidation in the market. Participation in the organized power market segments is relevant for day-ahead market prices above 130 EUR/MWh, disregarding the households’ tariff rate. The low price caps inhibit the prosumer’s participation in the market, while the transition from the feed-in tariff to net billing significantly promotes their development only under high price caps.

Данные исследования выполнены благодаря исходной информации, представленной горнодобывающими предприятиями Криворожского железорудного бассейна, в частности “Евраз Сухая Балка” и “Центральный ГОК”.

Solar photovoltaic (PV) energy systems are one of the most widely deployed renewable technologies in the world. The efficiency of solar panels has been studied during the last few decades, and, to date, it has not been possible to displace the production of energy using crystalline silicon wafer-based technology whose efficiency has reached values around 26.1%. Moreover, using solar tracking PV systems has become a feasible alternative to increase the electric output of PV silicon technologies instead of using the conventional fixed PV installation on a flat or sloping surface. The following study has compared fixed and dual-axis sun-tracking PV panels in order to quantify the enhancement associated with the amount of energy harvested when using dual-axis tracking PV systems in the city of Manta, located in a coastal region of Ecuador. In order to carry out this study, an IoT monitoring system based on Raspberry Pi3 and Arduino platforms was used. Measurements of solar radiation (W/m2), light intensity (Lux), temperature (°C), short-circuit current (A), and open-circuit voltage (V) were taken every minute for both systems. The results prove that the dual-axis tracking PV system produces, on average, 19.62% more energy than the static PV system. These results present an 8.62% energy increase with respect to a previous study carried out in an equatorial region with similar characteristics to those of the city of Manta, where a one-axis tracking PV system was used.