• Energy Research
• Restricted close
• Embargo close
• 7. Clean energy close
• 12. Responsible consumption close
• CN close
• BE close
• MY close

The presented article will describe an 'effect-cause' model for the purpose of simulating the energy consumption of DC fed light rail vehicles. The model will assess the advantages of hybrid vehicles in terms of energy consumption, network power and voltage variations, line current and losses; and will help sizing and designing a supercapacitor based energy storage system (ESS) for both on-board, and stationary applications. The proposed modeling needs to allow the ESS sizing according to the objective that needs to be achieved, being braking energy recovery, voltage drop compensation and peak power shaving the most common goals of ESS use in hybrid vehicles. The needed power and energy levels will vary in function of the vehicle features and the driving cycle followed. This all can be determined by the quasi-static simulation tool to ease the design process. Another objective of the modeling tool is to evaluate the behaviour of the vehicle power flow controller, which manages the power from/to the ESS in function of the state of several variables.

This paper deals with the medium between two reconfigurable sensor nodes characterized by radio interfaces that support multiple channels for exchanging real-time messages under energy constraints. These constraints are violated if the consumed energy in transmission is higher than the remaining quantity of energy. A reconfiguration, i.e., any addition or removal of tasks in devices and consequently of messages on the medium, can cause the violation of real-time or energy constraints at run time. To achieve a feasible scheduling in time (i.e., message deadlines will be respected) and energy (i.e., there is available energy) on the medium, we propose new dynamic solutions: Balance, Dilute, and a Combination of them to manage any addition or removal of messages. The proposed approach utilizes the energy harvesting techniques and the PowerControl algorithm to reduce the nonharvested consumed energy. The proposed strategies achieve significant improvement over existing methods and provide the highest percentage of adding messages, with a lower average in response time and energy consumption. They reach a percentage of success in adding the highest priority messages while meeting deadlines up to 85%.

Capítulos en libros This paper assesses the scalability and replicability of smart grid projects, by means of the identification of limitations and barriers faced by these projects. Factors have been identified that impact a project s scalability and replicability by means of a review of demonstration projects. The factors are of technical, economic, regulatory and social acceptance nature, and they describe requirements for scalability and replicability. Data was collected from ongoing European smart grid demonstration projects through the use of an elaborated questionnaire on the identified factors. Which allowed to quantify the status quo to what extent projects have taken these factors into account. Dew to their nature the derived factors can be categorized in technical, economic and regulatory & stakeholder related factor areas The obtained results allowed the identification of barriers, i.e. limitations regarding the scalability and replicability of smart grid projects. In particular projects face barriers regarding the absence of standards, the physical limits of the existing infrastructure, the absence of cost-benefit analyses, the neglect of varying macro-economic factors, stakeholder involvement and from the dependency of projects on regional or national regulatory frameworks and market designs. info:eu-repo/semantics/publishedVersion

The potential of renewable energy should be fully exploited in the transportation sector to achieve a cleaner production. Therefore, this paper proposes an on-grid hybrid hydrogen refueling and battery swapping station powered by wind energy. This novel concept can promote the development of low-carbon emission vehicles including hydrogen-based vehicle and battery electric vehicle. During the daily operation of the station, the multiple uncertainties may lead to a higher operational cost. To address this problem, a hybrid stochastic/distributionally robust optimization method is proposed to handle different uncertainties for the energy management problem. The first type of uncertainties can be depicted by a certain distribution, i.e. electricity price and wind power, which is processed by a stochastic optimization method. The second type of uncertainties is associated with human behaviors and is difficult to find its probability distribution, i.e. the hydrogen demand of hydrogen-based vehicles, so the second type is processed by a distributionally robust optimization method. The overall objective is to minimize the total operational cost of the station, which also considers the battery swapping station overstock punishment. Because a reasonable battery swapping scheduling can reduce the waiting time of users and operational cost of the station. The results indicate that the proposed method can effectively address the conservatism of solutions as its total operational cost is 4.4% lower than that of the hybrid stochastic/robust optimization method under a high confidence level.

Urban environments provide opportunities for greater resource efficiency and the fostering of urban ecosystems. Brownfield areas are a typical example of underused land resources. Brownfield redevelopment projects that include green infrastructure allow for further ecosystems to be accommodated in urban environments. Green infrastructure also deliver important urban ecosystem services (UES) to local residents, which can greatly contribute to improving quality of life in cities. In this case study, we quantify and assess the economic value of five UES for a brownfield redevelopment project in Antwerp, Belgium. The assessment is carried out using the “Nature Value Explorer” modelling tool. The case includes three types of green infrastructure (green corridor,infiltration gullies and green roofs) primarily intended to connect nature reserves on the urban periphery and to avoid surface runoff. The green infrastructure also provides air filtration, climate regulation, carbon sequestration and recreation ecosystem services. The value of recreation far exceeds other values, including the value of avoided runoff. The case study raises crucial questions as to whether existing UES valuation approaches adequately account for the range of UES provided and whether such approaches can be improved to achieve more accurate and reliable value estimates in future analyses.

Nanosecond-level transient electromagnetic disturbance (TED), including very fast transient overvoltage caused by operation of disconnectors, high-altitude electromagnetic pulse, and many other fast transients may interfere or even damage the electrical equipment. As one of the main overvoltage protective equipment, the protective performance of metal-oxide surge arresters (MOAs) under nanosecond-level TED should be investigated and then compared with that under microsecond-level TED, especially the lightning impulse. Based on a testing platform containing a 400-kV pulse generator with adjustable rise time from 5 to 100 ns, the behaviors of nonlinearity, fast impulse response, and converting impedances of three types of 10-kV MOAs under TED with different rise time were explored experimentally in this article. The peak residual voltages of 10-kV MOAs under TED with the rise time of 5 ns at 5 kA are 50.2–60.7% higher than those under the lightning impulse. The rise time of TED has significant influence on the peak voltage and impedance converting behaviors of MOAs. A circuit model of 10-kV MOAs under nanosecond-level TED is built and validated by experimental results, which can be applied in insulation coordination and design of protective devices against TED.

Abstract Silicon carbide-based filter elements were catalytically activated to provide filter elements for catalytic tar removal from biomass-derived syngas. The filter element support was coated with CeO 2 , CaO–Al 2 O 3 and MgO with a specific surface of 7.4, 15.9 and 21.9 m 2 /g synthesized by exo-templating with activated carbon. Doping of a MgO coated filter element with 60 wt% NiO has led to an increase of the specific surface from 0.15 to 0.21 m 2 /g, whereas in case of a MgO–Al 2 O 3 coated filter element a decrease from 1.18 to 0.91 m 2 /g was found. An increase of the NiO loading from 6 to 60 wt% on a MgO coated filter element resulted in an increase of the naphthalene conversion from 91 to 100% at 800 °C and a face velocity of 2.5 cm/s at a naphthalene concentration of 5 g/Nm 3 in model biomass gasification gas. In case of a MgO–Al 2 O 3 coated filter element with 60 wt% NiO in addition to complete naphthalene conversion in the absence of H 2 S, a higher conversion of 66% was found in the presence of 100 ppmv H 2 S compared to 49% of the MgO–NiO coated filter element. After scaling up of the catalytic activation procedure to a 1520 mm long filter candle, which shows an acceptable differential pressure of 54.9 mbar, 58 and 97% naphthalene conversion was achieved in the presence and absence of H 2 S, respectively. The calculated WHSV value of 209.6 Nm 3 h −1 kg −1 indicates the technical feasibility of a further increase of the catalytic performance by an increase of the NiO loading.

Abstract The present paper proposes a way to introduce chemical reactions in composite curves, in such a way that the irreversibility’s generated by the chemical reaction are expressed as equivalent thermal diffusion. The heat of reaction is considered to be released at a “reversible reaction temperature” and the diffusion between this reversible temperature and the actual temperature generates the actual exergy destruction. Corresponding hot and cold curve contributions result in the composite curves, which visualizes the exergy destruction and the chemical pinches which are present in the exchanger and reactor network. The concept is illustrated through an application on chemical recuperation in a gas turbine cycle.