• Energy Research
• CN close
• IT close
• EC close

The present paper examines the vortex-induced vibration (VIV) of a 5:1 rectangular cylinder with a detached splitter in its near wake. The tested gap ratio between the cylinder and the splitter (g/D, where g is the gap between the cylinder rear and the splitter and D is the depth of the rectangular cylinder) ranges from 0.5 to 2.0, with an increment of 0.5. To serve as a reference case, the rectangular cylinder without the splitter is also tested under the same conditions. The test Reynolds number ranges from 32 320 to 56 507. This study delves into the vibration response, pressure distributions, and power spectral densities (PSD) of the cylinder under varying gap ratios. Based on qualitative and quantitative analyses between the cylinder and the splitter using phase average techniques, smoke-wire visualization, and numerical simulation, the different vortex shedding modes according to different gap ratios were identified. Experimental and numerical results show that the detached splitter and its gap ratio play important roles in determining the cylinder VIV properties. For g/D = 0.5, the detached splitter has a sensible mitigation on the cylinder VIV. However, as the gap ratio increases, the VIV response initially recovers to the reference case at g/D = 1.0 and subsequently enlarges at g/D = 1.5 and 2.0. The pressure distribution results showed that the detached splitter demonstrates its effects primarily through fluctuations in the pressure field rather than the mean field. In addition, at g/D = 0.5, a sensibly decayed PSD is observed, while at g/D = 1.0–2.0, an intensified PSD is detected. The underlying mechanism of the detached splitter on the VIV of the 5:1 rectangular cylinder should be attributed to the von Kármán vortex street compared to the reference case.

Abstract As a burgeoning theoretical framework, energy justice has been mostly focused on the energy transition in Western countries, where socio-political settings are largely featured by liberalism and democracy, leaving an obvious gap in its application in other socio-political contexts. As a major energy consumer and a leader of the global low-carbon transition, China is characterized by a distinctive socio-political regime. An array of grand strategies to transform its coal-dominant energy structure have been initiated to ameliorate deteriorating environmental crises in particular and materialize a low-carbon transition in general. Based on extensive evidence, this article incorporates the energy justice framework into the analysis of an ongoing energy transition project in rural Northern China. It contributes to the related research in three dimensions. First, empirically, it demonstrates that the coal-to-gas heating transition project has been swamped with social injustices; the absence of measures to address these would lead this mega-project to profound failure. Second, theoretically, it illustrates that the concerns of justice are even more paramount in an authoritarian context where policy processes are characterized by strong political-administrative intervention and the pursuit of efficiency at all cost. In light of this, it stresses the indispensable role of restorative justice as a core tenet in achieving energy justice in authoritarian socio-political contexts, such as China. Third, this study advocates expanding the evaluation parameters of authoritarian environmentalism to include social consequences.

According to the renewable energy directive 2009/28/EC, the European Union Member States should increase by 2020 the use of renewable energy to 20% of gross final energy consumption and to reach a mandatory share of 10% renewable energy in the transport sector. This study aims to quantify the impact of 2020 bioenergy targets on the land use in the EU, based on the projections of the National Renewable Action Plans in four scenarios: Scenario 1. Bioenergy targets according to NREAPs; Scenario 2. Bioenergy targets according to NREAPs, no second generation biofuels; Scenario 3. Bioenergy targets according to NREAPs, reduced import of biofuels and bioliquids; Scenario 4. Bioenergy targets according to NREAPs, high imports of biofuels and bioliquids. This study also considers the credit for co-products generated from biofuel production. The analysis reveals that the land used in the EU for bioenergy would range between 13.5 Mha and 25.2 Mha in 2020. This represent between 12.2% and 22.5% of the total arable land used and 7.3% and 13.5% of the Utilised Agricultural Area (UAA). In the NREAPS scenario, about 17.4 Mha would be used for bioenergy production, representing 15.7% of arable land and 9.4% of UAA. The increased demand from biofuels would lead to an increased generation of co-products, replacing conventional fodder for animal feed. Considering the co-products, the land used for bioenergy would range between 8.8 Mha and 15.0 Mha in 2020 in the various scenarios. This represent between 7.9% and 13.3% of the total arable land used in the EU and 4.7% and 8.0% of the UAA. In the NREAPS scenario, when co-products are considered, about 10.3 Mha would be used for biofuels, bioliquids and bioenergy production, representing 9.3% of arable land and 5.6% of agricultural land. This study further provides detailed data on the impact on land use in each Member State.

The present study measured the relative efficiency of five major commercial ports in West Africa, using three different Data Envelopment Analysis (DEA) methods, the CCR, BCC, and Windows I-C methods over the years 2005-2016. Seven input variables and one output variable were used in the model analysis. The CCR and BCC methods were used to evaluate the technical and scale efficiency while the Windows I-C method provided a comprehensive ranking of the studied ports. The results showed that the scale efficiency score of 89.53% indicated that on average the production scale of the ports had deviated from the most productive scale size (MPSS) by 10.47%. These results revealed that the source of the overall inefficiency is due to scale rather than pure technical inefficiency. Hence, in order to improve the overall efficiency, the two scaled inefficient ports of Abidjan and Cotonou should adjust their scale of operations. Then, further investigations were conducted to detect correlations between various variables used in this study. The research found that the absence of any correlation for non-significant variables and negative correlation for the significant variables throughout time resulted from the fact that these variables were not fully utilized. Meaning that they were not efficiently used to boost the container throughput on a scale basis, the research also found that a pandemic or insecurity could easily impact seaports activities with the case of the Ebola outbreak which strucked the West African region from the year 2013 to 2016, or the terrorism threats which prevailed in the region around the year 2012. Thus, for ports to stand out in the present fiercely competitive environment, ports authorities ought to analyze their operational scale to identify whether or not the production size is fitting before further port capacity expansion.

Advanced airborne equipment liquid cooling system presents the development trend of multiple pumps in parallel, centralised heat dissipation and high efficiency circulation, but this type of system has the characteristics of many variable parameters and strong non-linearity, which makes the system operation and control become extraordinarily complex, posing a serious challenge to the system performance. Although some progress has been made in the current optimization of liquid cooling system performance, there are still gaps such as insufficient consideration of the multi-objective optimization problem and limited optimization effect. To fill this research gap, this study takes minimum specific energy consumption, minimum flow deviation and minimum impeller load as the optimization objectives, establishment of multi-objective optimization model for liquid-cooled power unit, the optimal solution set of the Pareto model is solved using the multi-objective grey wolf optimization algorithm (MOGWO), and the optimal solution set is substituted for the optimal solution, and the evaluation indexes are designed in combination with the actual working conditions to obtain the optimal schedule. By example analysis, the optimized system under variable operating conditions, the impeller load and specific energy consumption decreased by 16.88% and 3.64% respectively, while the rise in flow deviation was controlled within 0.76%. The newly established optimisation model effectively mitigates potential safety hazards during system operation. Finally, by combining all the indicators, three scheduling options are provided under variable operating conditions, focusing on reliability and economy, overall balance and high-precision flow, respectively, in order to adapt to the diversified requirements of different operating environments.

SUMMARYThe phycobilisomes (PBSs) of cyanobacteria and red‐algae are unique megadaltons light‐harvesting protein‐pigment complexes that utilize bilin derivatives for light absorption and energy transfer. Recently, the high‐resolution molecular structures of red‐algal PBSs revealed how the multi‐domain core‐membrane linker (LCM) specifically organizes the allophycocyanin subunits in the PBS’s core. But, the topology of LCM in these structures was different than that suggested for cyanobacterial PBSs based on lower‐resolution structures. Particularly, the model for cyanobacteria assumed that the Arm2 domain of LCM connects the two basal allophycocyanin cylinders, whereas the red‐algal PBS structures revealed that Arm2 is partly buried in the core of one basal cylinder and connects it to the top cylinder. Here, we show by biochemical analysis of mutations in the apcE gene that encodes LCM, that the cyanobacterial and red‐algal LCM topologies are actually the same. We found that removing the top cylinder linker domain in LCM splits the PBS core longitudinally into two separate basal cylinders. Deleting either all or part of the helix‐loop‐helix domain at the N‐terminal end of Arm2, disassembled the basal cylinders and resulted in degradation of the part containing the terminal emitter, ApcD. Deleting the following 30 amino‐acids loop severely affected the assembly of the basal cylinders, but further deletion of the amino‐acids at the C‐terminal half of Arm2 had only minor effects on this assembly. Altogether, the biochemical data are consistent with the red‐algal LCM topology, suggesting that the PBS cores in cyanobacteria and red‐algae assemble in the same way.

The vehicle will generate an amount of current while the electric vehicle just starting to regeneratively brake. In order to avoid the impact of high current on the traction battery, a novel electrohydraulic hybrid electric vehicle has been proposed. The main power source is supplied by the electric drive system, and the hydraulic system performs the auxiliary drive system that fully exerts the advantages of the electric drive system and the hydraulic drive system. A proper regenerative braking control strategy is presented, and the control parameters are determined by the fuzzy optimization algorithm. The simulation analysis built the model through the united simulation of AMESim and MATLAB/Simulink. The results illustrated that the optimized control strategy can reduce battery consumption by 1.22% under NEDC-operating conditions.