• Energy Research
• 13. Climate action close
• 12. Responsible consumption close
• CN close
• JP close
• Renewable Energy close

This paper presents a multi-objective optimization model for a long-term generation mix in Indonesia. The objective of this work is to assess the economic, environment, and adequacy of local energy sources. The model includes two competing objective functions to seek the lowest cost of generation and the lowest CO2 emissions while considering technology diffusion. The scenarios include the use of fossil reserves with or without the constraints of the reserve to production ratio and exports. The results indicate that Indonesia should develop all renewable energy and requires imported coal and natural gas. If all fossil resources were upgraded to reserves, electricity demand in 2050 could be met by domestic energy sources. The maximum share of renewable energy that can be achieved in 2050 is 33% with and 80% without technology diffusion. The least cost optimization produces lower generation costs than the least CO2 emissions, as well as the combined scenario. Total CO2 emissions in 2050 are five to six times as large as current emissions. The least CO2 emissions scenario can reduce almost half of the CO2 emissions of the least cost scenario by 2050. The proposed multi-objective optimization model leads some optimal solutions for a more sustainable electricity system.

Abstract Compared with other traditional energy sources, renewable energy, which results the less pollution and has numerous resources, is a significant factor in addressing the current issues of the serious environmental pollution and the resource depletion. Large-scale renewable energy integrated to the grid could bring change in both morphological structure and operation modes of energy transmission. Therefore, it is necessary to research the evolution mechanism of the future transmission network with a high proportion of the renewable energy. In this paper, an evolution framework of power system with high proportion of renewable energy is proposed. Firstly, a network equivalence and simplification based on power transfer distribution factors (PTDFs) is proposed, which can effectively simplify the decision-making process of evolution of large-scale power system. Then, an annual production simulation (8760 h) which takes into account renewable energy and load fluctuations is used to find out the bottleneck of the power grid. Based on the above methods, evolution strategy of power system with high proportion of renewable energy is studied for finding out optimal expansion strategy. A real power system of Zhejiang province is used as a test system. Test results demonstrate the feasibility of the proposed evolution framework.

Abstract For the first time the electrical conductivity of bamboo biographite-based material reported a ground-breaking milestone of 4.4 × 104 (S/m). This reported conductivity by far exceeded all previous reported conductivity measurements obtained from renewable carbon. Controlled high-temperature thermal carbonization of biomass, notably Asian bamboo, at extended residence times elicited surprising growth of nano-layered biographitic structures with a layer-to-layer distance of less than 0.3440 nm. Moreover, thermodynamically dispersed bamboo and pine biographitic nano-layered carbon-based lightweight composites in a polyamide matrix were found to be intrinsically conductive both thermally and electrically. Electromagnetic interference (EMI) shielding device made from bamboo renewable carbon/cellulose nanofiber (CNF) composites possesses EMI shielding effectiveness (SE) of ∼23 dB. These results constitute a new advancement in the materials science of nano-layered graphites from renewables and their applications as EMI filtering devices and as electrode materials in air cathodes, electronics, supercapacitors in energy storage devices, and thermal management of batteries and sensors.

Abstract To ensure techno-economically suitable installation of ground source heat pump (GSHP) systems, thermal and hydrogeological properties of the subsoil need to be investigated. In this paper, the geothermal potential for three types of GSHP installations in the urban area of Wuhan city is assessed based on preliminary geological investigations. The potential for shallow geothermal energy is evaluated for surface water heat pump systems (SWHP), groundwater heat pump systems (GWHP) and ground coupled heat exchanger heat pump systems (GCHP). The mapped shallow geothermal potentials provide essential information for the installation of GSHPs and for the management of geothermal resources of Wuhan city. Furthermore, the heat transfer rates for some typical configured borehole heat exchanger (BHE) are tested by field Thermal Response Tests (TRT). In order to understand the techno-economic feasibility of the GSHPs, different types of the installed systems are measured and analyzed.

Abstract Standardization of biogas technology is immensely important for the promotion of the biogas industry worldwide. China has built a complete biogas standard system, which is divided into common, household biogas, biogas engineering, biogas digester for domestic sewage treatment, output utilization, and service system standards. The problems and potential barriers for biogas standardization in China are analyzed and come down to sluggish standard, overlapped standard, government-dominated standard, and lagging international standard. Accordingly, all potential biogas standards should be evaluated and placed under the same department. China Biogas Society and China Association of Rural Energy Industry play leading roles in developing enterprise or group/association biogas standards and ISO biogas standards. The bio-natural gas standard system and experimental standardization should be developed as well to replenish biogas standard system. A paradigm shift in biogas standardization should be from government-dominated to market-oriented model. The lessons learned for other developing countries includes expanding standardization to multi-aspects to realize full lifecycle control and management, building rapid responding mechanism of standardization to adopt industry transformation, integrating outdated standards into new versions, and establishing market-based standard system.

Accurate estimation of extreme wave conditions is critical for offshore renewable energy activities and applications. Wave power is the transport of energy by wind waves, and the capture of that energy to do useful work. Wave energy converter (WEC) devices are designed to sustain the wave-induced loads that they experience during both operational and survival sea states. The extreme values of these forces are often a key cost driver for WEC designs. These extreme loads often occur during severe storms; therefore careful examination of harsh wave conditions during the device design process is needed. Consequently the development of a specific extreme condition modeling method is essential. This paper presents a novel method for estimating extreme wave statistics, based on the hourly measured wave height maxima at the location of interest. Wave measurements, analyzed in this paper, were collected at SEM-REV offshore sea station located near the coast of France, during years 2001–2010. Note that applied statistical methodology is general and can be well applied to a measured WEC response, and its technology risk assessment. Accurate estimation of extreme wave conditions is critical for offshore renewable energy activities and applications. SEM-REV is known French wave energy test site. The method, referred to as ACER method, is presented in brief detail. ACER method provides an accurate extreme value prediction, utilizing available data efficiently. In this study the estimated return level values, obtained by ACER method, are compared to the corresponding return level values obtained by Gumbel method. Based on the overall performance of the proposed method, it is concluded that the ACER method can provide a robust and accurate prediction of extreme wave height at a given location.

Abstract China has proposed the Renewable Portfolio Standard (RPS) policy to advance the stable development of renewable energy. The RPS requires each province to achieve a stated minimum share of renewable energy power in the total provincial power generation. However, there is an obvious mismatch between the actual capability of generating renewable power and the assigned responsibility for the share of renewable energy power based on the RPS in some provinces. Therefore, this study aims to optimize the renewable power dispatching strategy across provinces for satisfying the RPS requirements in China and to assess the corresponding pressure for each province. A renewable energy power dispatching model is developed, and an economically feasible strategy for dispatching renewable energy power in Chinese provinces in 2020–2022 was obtained. The results indicate that it is necessary to dispatch 395.2 and 140.4 TWh of hydropower and non-hydropower nationwide, respectively, in 2022 to fulfill the RPS target when the COVID-19 is effectively controlled worldwide. If COVID-19 cannot be effectively controlled, 376.6 and 127.8 TWh of hydropower and non-hydropower must be dispatched nationwide to fill the gap. Beijing, Tianjin, Shanghai, and Zhejiang are faced with a relatively high pressure under the RPS target. Finally, a path for each province to achieve its RPS target is proposed.

Zinc oxide (ZnO) nanostar synthesized by simple and up-scalable microwave-assisted surfactant free hydrolysis method was applied as catalyst for biodiesel synthesis through one-step simultaneous esterification and transesterification from high free fatty acid (FFA) contaminated unrefined feedstock. It was found that ZnO nanostar catalyst was reacted with FFA to yield zinc oleate (ZnOl) as intermediate and finally became zinc glycerolate (ZnGly). With the re-deposition of ZnGly back to the ZnO nanostar catalyst at the end of the reaction, the catalyst can be easily recovered and stay active for five cycles. Furthermore, the rate of transesterification is highly promoted by the presence of FFA (6 wt.%) which makes it an efficient catalyst for low grade feedstock like waste cooking oil and crude plant oils.

By establishing a two-stage model in which a monopolization firm first chooses R&D input and then the quantity of energy, this paper compares the different effects of two regulatory policies: feed-in tariff (FIT) and renewable portfolio standard (PRS). The results show that FIT is more efficient than RPS to increase the quantity of renewable energy (installed capacity) and to stimulate the R&D input to reduce costs. And RPS policy is more efficient to reduce the carbon emissions and to improve the consumer surplus. Apart from existing findings, we cannot obtain the accurate conclusion about the effects of social welfare under the two policies. The effects of two policies on the social welfare heavily depend on the level of negative externality.