• Energy Research
• 6. Clean water close
• CN close
• US close
• AU close
• BE close
• Energies close

The U.S. Environmental Protection Agency’s (EPA) Superfund—the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) database—has collected and built an open-source database based on nearly 2000 US soil remediation cases since 1980, providing detailed information and references for researchers worldwide to carry out remediation work. However, the cases were relatively independent to each other, so the whole database lacks systematicness and instructiveness to some extent. In this study, the basic features of all 144 soil remediation projects in four major oil-producing states (California, Texas, Oklahoma and Alaska) were extracted from the CERCLA database and the correlations among the pollutant species, pollutant site characteristics and selection of remediation methods were analyzed using traditional and machine learning techniques. The Decision Tree Classifier was selected as the machine learning model. The results showed that the growth of new contaminated sites has slowed down in recent years; physical remediation was the most commonly used method, and the probability of its application is more than 80%. The presence of benzene, toluene, ethylbenzene and xylene (BTEX) substances and the geographical location of the site were the two most influential factors in the choice of remediation method for a specific site; the maximum weights of these two features reaches 0.304 and 0.288.

The U.S. Environmental Protection Agency’s (EPA) Superfund—the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) database—has collected and built an open-source database based on nearly 2000 US soil remediation cases since 1980, providing detailed information and references for researchers worldwide to carry out remediation work. However, the cases were relatively independent to each other, so the whole database lacks systematicness and instructiveness to some extent. In this study, the basic features of all 144 soil remediation projects in four major oil-producing states (California, Texas, Oklahoma and Alaska) were extracted from the CERCLA database and the correlations among the pollutant species, pollutant site characteristics and selection of remediation methods were analyzed using traditional and machine learning techniques. The Decision Tree Classifier was selected as the machine learning model. The results showed that the growth of new contaminated sites has slowed down in recent years; physical remediation was the most commonly used method, and the probability of its application is more than 80%. The presence of benzene, toluene, ethylbenzene and xylene (BTEX) substances and the geographical location of the site were the two most influential factors in the choice of remediation method for a specific site; the maximum weights of these two features reaches 0.304 and 0.288.

The electromagnetic vibration caused by electromagnetic force on the stator has threatened large hydro generators operating safely and stably. At the Zhexi hydropower station, the hydro generator was beset by electromagnetic vibration for a long time. Therefore, the paper provided a new method to help to find the vibration source and detect the hydro generator fault, through the combination of simulation and experiments. In this paper, the 3D stator pack structure model and the 2D hydro generator electromagnetic models under rotor eccentricity and rotor ellipse deformation conditions were built. Then, electromagnetism simulations were conducted to study the characteristics of the electromagnetic flux and electromagnetic force under different conditions by using the finite element method (FEM). Lastly, the vibration testing experiments and harmonic response simulations of stator frame were performed to present the characteristics of vibration distribution in frequency conditions. The simulation results were compared with the generator measured data to try to find out the main vibration source and guide the overhaul.

The electromagnetic vibration caused by electromagnetic force on the stator has threatened large hydro generators operating safely and stably. At the Zhexi hydropower station, the hydro generator was beset by electromagnetic vibration for a long time. Therefore, the paper provided a new method to help to find the vibration source and detect the hydro generator fault, through the combination of simulation and experiments. In this paper, the 3D stator pack structure model and the 2D hydro generator electromagnetic models under rotor eccentricity and rotor ellipse deformation conditions were built. Then, electromagnetism simulations were conducted to study the characteristics of the electromagnetic flux and electromagnetic force under different conditions by using the finite element method (FEM). Lastly, the vibration testing experiments and harmonic response simulations of stator frame were performed to present the characteristics of vibration distribution in frequency conditions. The simulation results were compared with the generator measured data to try to find out the main vibration source and guide the overhaul.

In order to evaluate the displacement effect of four kinds of injection media in tight oil sandstone, water, active water, CO2, N2 flooding experiments were carried out in laboratory. Online Nuclear Magnetic Resonance (NMR) spectrometers combine the advantages of NMR technology and core displacement experiments. In the displacement experiment, NMR data of different injection volumes were obtained and magnetic resonance imaging (MRI) was carried out. The results showed that micro and sub-micropores provided 62–97% of the produced crude oil. The enhanced oil recovery ratio of active water flooding was higher than that of conventional water flooding up to 10%. The recovery ratio of gas flooding in micro and sub-micropores was 60–70% higher than that of water flooding. The recovery ratio of CO2 flooding was 10% higher than that of N2 flooding. The remaining oil was mainly distributed in pores larger than 0.1 μm. Under the same permeability level, the remaining oil saturation of cores after gas flooding was 10–25% lower than water flooding. From MRI images, the displacement effects from good to bad were as follows: CO2 flooding, N2 flooding, active water flooding, and conventional water flooding.

In order to evaluate the displacement effect of four kinds of injection media in tight oil sandstone, water, active water, CO2, N2 flooding experiments were carried out in laboratory. Online Nuclear Magnetic Resonance (NMR) spectrometers combine the advantages of NMR technology and core displacement experiments. In the displacement experiment, NMR data of different injection volumes were obtained and magnetic resonance imaging (MRI) was carried out. The results showed that micro and sub-micropores provided 62–97% of the produced crude oil. The enhanced oil recovery ratio of active water flooding was higher than that of conventional water flooding up to 10%. The recovery ratio of gas flooding in micro and sub-micropores was 60–70% higher than that of water flooding. The recovery ratio of CO2 flooding was 10% higher than that of N2 flooding. The remaining oil was mainly distributed in pores larger than 0.1 μm. Under the same permeability level, the remaining oil saturation of cores after gas flooding was 10–25% lower than water flooding. From MRI images, the displacement effects from good to bad were as follows: CO2 flooding, N2 flooding, active water flooding, and conventional water flooding.

As an important infrastructure project, the concrete gravity dam plays an extremely important role in hydropower generation, irrigation, flood control, and other aspects. Seepage is an important factor affecting the stability of concrete gravity dams. Seepage safety assessment is of great significance to the safe operation of the dams. However, the existing seepage safety assessment models are not dynamic, and the correlation among indicators is often neglected and the overall seepage safety of the concrete gravity dams has not been considered. To solve these problems, this research proposes a dynamic matter-element extension (D-MEE) model. First, the D-MEE model is established through adroit integration of the matter-element extension (MEE) model and functional data analysis (FDA). Second, a dynamic criteria importance through the intercriteria correlation (D-CRITIC) method that can effectively consider the correlation among indicators is proposed to determine the weights. Third, the influence of different dam blocks on the overall seepage safety status is considered by constructing a spatial weight matrix. Finally, the proposed method is applied to the concrete gravity dam X in southwest China. The results show that the proposed method is effective and superior to the existing evaluation methods of seepage safety.