• Energy Research
• 2016-2025close
• CN close
• US close
• DE close
• Renewable Energy close

Abstract This study sought to quantify and characterize cassava waste as fuel. The wastes from three cultivars were collected to study and were divided into three distinct parts of the cassava plant: seed stem, thick stalks, and thin stalks. Physical and chemical analyzes were carried out to determine the elemental composition of the waste: volatile matter; fixed carbon; ash; moisture; lignin; cellulose; hemicellulose; ash composition and higher heating value were determined. We conducted a thermogravimetric analysis in oxidizing and inert atmospheres to study the behavior of the waste as fuel. The root productivity obtained ranged from 7.7 to 13.0 t ha−1 yr−1 on a dry basis (db), and the ratio between waste and roots varied from 0.36 to 0.91. The physical and chemical properties of cassava waste are analogous to those of woody biomass regarding the elemental composition, the higher heating value, and thermogravimetric analysis. Ash content varied from 2.5% to 3.5%, reaching around 6.0% in samples unwashed. Approximately 60% of the ashes are alkali oxides, especially P2O5, K2O, and CaO, which have low melting points. The alkali index calculated suggests that there is a strong tendency that the combustion process leads to ash fouling and the formation of ash deposits.

Abstract Compared with other traditional energy sources, renewable energy, which results the less pollution and has numerous resources, is a significant factor in addressing the current issues of the serious environmental pollution and the resource depletion. Large-scale renewable energy integrated to the grid could bring change in both morphological structure and operation modes of energy transmission. Therefore, it is necessary to research the evolution mechanism of the future transmission network with a high proportion of the renewable energy. In this paper, an evolution framework of power system with high proportion of renewable energy is proposed. Firstly, a network equivalence and simplification based on power transfer distribution factors (PTDFs) is proposed, which can effectively simplify the decision-making process of evolution of large-scale power system. Then, an annual production simulation (8760 h) which takes into account renewable energy and load fluctuations is used to find out the bottleneck of the power grid. Based on the above methods, evolution strategy of power system with high proportion of renewable energy is studied for finding out optimal expansion strategy. A real power system of Zhejiang province is used as a test system. Test results demonstrate the feasibility of the proposed evolution framework.

Abstract Sunlight Concentrated and transmission for daylighting via optical fibers is a booming technology of direct utilization of solar energy. It uses optical fibers to introduce sunlight deep into building interior. In this work, a sunlight concentrating and transmitting system via plastic optical fibers was developed and tested. This study addressed the cooling problem of the plastic optical fibers under highly irradiation. Polymethylmethacrylate (PMMA) plastic fibers have a strong absorption effect on infrared light, which means that plastic fibers heat up so much when they transmit focused sunlight that they burn. In this study, a comprehensive cooling approach was developed to solve the overheating problem of plastic optical fibers, which consists of an infrared filter, cooling water and a homogenizer. The transmission efficiency of the system was measured to be about 15%. Experiments show that the comprehensive cooling measures developed can ensure that PMMA plastic optical fibers are in a safe temperature range. This shows that it is feasible to use low-cost plastic optical fibers instead of expensive silica fiber to transmit high flux for daylighting.

Abstract Bamboo has been considered a potential feedstock of energy for the future. It can be subjected to the pyrolysis for biofuels production. The thermogravimetric analysis (TGA) combined with differential thermogravimetric analysis (DTG) for bamboo was carried out prior to pyrolysis. The thermal degradation of bamboo was mainly between 230 and 420 °C. The conventional pyrolysis of bamboo was investigated in a bubbling fluidized-bed reactor using silica sand. The product distribution and composition of pyrolysis bio-oil were dependent on biomass component and operating conditions such as pyrolysis temperature, fluidization velocity, and particle size of biomass. The fractional catalytic pyrolysis of bamboo was also studied to upgrade the pyrolysis vapor, using HZSM-5 and red mud. The highest yield of bio-oil was 54.03 wt% compared to 49.14 wt% and 50.34 wt% of HZSM-5 and red mud catalyst, respectively. In the red mud catalytic pyrolysis, the oxygen content was rejected from pyrolysis vapor mostly via decarboxylation to produce more CO2 than CO; in contrast, for the HZSM-5 catalytic pyrolysis, the production of CO through decarbonylation was more favored than CO2. The main composition of catalytic pyrolysis bio-oil was 4-vinylphenol, which was employed as a raw material source to synthesize valuable material for energy storage.

Abstract In some shelf sea regions of the world, the tidal range is sufficient to convert the potential energy of the tides into electricity via tidal range power plants. As an island continent, Australia is one such region – a previous study estimated that Australia hosts up to 30% of the world’s resource. Here, we make use of a gridded tidal dataset (TPXO9) to characterize the tidal range resource of Australia. We examine the theoretical resource, and we also investigate the technical resource through 0D modelling with tidal range power plant operation. We find that the tidal range resource of Australia is 2004 TWh/yr, or about 22% of the global resource. This exceeds Australia’s total energy consumption for 2018/2019 (1721 TWh/yr), suggesting tidal range energy has the potential to make a substantial contribution to Australia’s electricity generation (265 TWh/yr in 2018/2019). Due to local resonance, the resource is concentrated in the sparsely populated Kimberley region of Western Australia. However, the tidal range resource in this region presents a renewable energy export opportunity, connecting to markets in southeast Asia. Combining the electricity from two complementary sites, with some degree of optimization tidal range schemes in this region can produce electricity for 45% of the year.

Abstract In the present study, Ru modified hierarchical zeolites xRu-MZSM were developed for cellulose fast pyrolysis. Comprehensive catalyst characterizations including XRD, XPS, N2 adsorption-desorption, Py-IR and so on, were performed to unveil the essential structural properties. The chemical modification and Ru decoration remarkably regulated the distribution of Bronsted/Lewis acid sites. The presence of RuOx species would supply abundant strong Lewis acid sites for participating catalytic cracking, dehydration, decarbonylation, decarboxylation, cyclization, aromatization, etc., in cooperation with Bronsted acid sites. In-situ generated active Ru0 centers during cellulose pyrolysis might facilitate the proceeding of deoxygenation, hydride transfer, and dehydrogenation. Among the as-prepared catalysts screened, 2Ru-MZSM was much more efficient in aromatics production from cellulose fast pyrolysis compared to parent ZSM, wherein the total aromatics yield achieved 16.8% at temperature of 650 °C and heating rate of 10 °C/ms with corresponding E value as low as 23.40 kJ/mol. Also, plausible reaction mechanism for xRu-MZSM involved cellulose fast pyrolysis was proposed in detail.