• Energy Research
• 7. Clean energy close
• CN close
• US close
• GB close
• DE close
• FR close

To meet power quality requirements, it is necessary to classify and identify the power quality of the power grid connected with renewable energy generation. S-transform (ST) is an effective method to analyze power quality in time and frequency domains. ST is widely used to detect and classify various kinds of non-stationary power quality disturbances. However, the long taper and scaling criteria of the Gaussian window in standard ST (SST) will lead to poor time domain resolution at low frequency and poor frequency resolution at high frequency. To solve the discrete side effects, it is necessary to select the optimal window function to locate the time frequency accurately. This paper proposes a modified ST (MST) method. In this method, an improved window function of energy concentration in time-frequency distribution is introduced to optimize the shape of each window function. This method determines the parameters of Gaussian window to maximize the product of energy concentration in a time-frequency domain within a given time and frequency interval, so as to improve the energy concentration. The result shows that compared with the SST with Gaussian window, ST based on the optimally concentrated window proposed in this paper has better energy concentration in time-frequency distribution.

Abstract An international workshop was held in Richland, Washington, United States of America, in October, 1980 to discuss progress on development of the acid digestion process for treating combustible nuclear waste. The workshop was attended by participants from nine member countries of the Nuclear Energy Agency of the Organization for Economic Cooperation and Development (OECD/NEA). The status of the acid digestion development programs of various countries is discussed in this paper. The acid digestion process has been developed and demonstrated on an engineering scale in several countries and appears to be especially applicable to treatment of combustible wastes containing high levels of transuranic contamination, where there is potential for recovering the transuranic radionuclides. Because the process takes place at a relatively low temperature, the plutonium contained in the residue is in a form that can be readily recovered using standard leaching techniques. The process is adaptable to a wide variety of combustible wastes, such as cellulosics, plastics, rubber materials, and ion exchange resin. While the process has been developed and demonstrated on an engineering scale primarily for transuranic contaminated wastes, the process is also adaptable to beta-gamma wastes such as reactor ion exchange resins.

Abstract Two office layouts with high and low levels of thermal control were compared, respectively traditional cellular and contemporary open plan offices. The traditional Norwegian practice provided every user with control over a window, blinds, door, and the ability to adjust heating and cooling. Occupants were expected to control their thermal environment to find their own comfort, while air conditioning was operating in the background to ensure the indoor air quality. In contrast, in the British open plan office, limited thermal control was provided through openable windows and blinds only for occupants seated around the perimeter of the building. Centrally operated displacement ventilation was the main thermal control system. Users’ perception of thermal environment was recorded through survey questionnaires, empirical building performance through environmental measurements and thermal control through semi-structured interviews. The Norwegian office had 35% higher user satisfaction and 20% higher user comfort compared to the British open plan office. However, the energy consumption in the British practice was within the benchmark and much lower than the Norwegian office. Overall, a balance between thermal comfort and energy efficiency is required, as either extreme poses difficulties for the other.

Abstract The Renewable energy power generation capacity has been rapidly increasing in China recently. Meanwhile, the contradiction between power supply and demand is becoming increasingly more prominent due to the intermittence of renewable energies. On the other hand, on the mitigation of carbon dioxide (CO2) emissions in China needs immediate attention. Power-to-Gas (PtG), a chemical energy storage technology, can convert surplus electricity into combustible gases. Subsurface energy storage can meet the requirements of long term storage with its large capacity. This paper provides a discussion of the entire PtG energy storage technology process and the current research progress. Based on the comparative study of different geological storage schemes for synthetic methane, their respective research progress and limitations are noted. In addition, a full investigation of the distribution and implementation of global PtG and CO2 capture and storage (CCS) demonstration projects is performed. Subsequently, the opportunities and challenges of the development of this technology in China are discussed based on techno-economic and ecological effects analysis. While PtG is expected to be a revolutionary technology that will replace traditional power systems, the main issues of site selection, energy efficiency and the economy still need to be adequately addressed. Additionally, based on the comprehensive discussion of the results of the analysis, power-to-gas and subsurface energy storage implementation strategies, as well as outlook in China are presented.

The power transformer is important equipment for energy conversion and transmission in the power grid and its failure will bring significant economic losses to the power system. The hot-spot temperature is a primary factor affecting the reliability and service life of power transformers. In order to calculate the temperature distribution of oil-immersed transformer windings accurately, it is required to solve a multi-physical problem, in which the magnetic field and the fluid-temperature field are coupled. In the simulation of multi-physical field of transformer, many studies usually omit the turn-to-turn insulation of windings to simplify the oil-immersed transformer model. The purpose of this paper is to investigate the effect of the turn-to-turn insulation of windings in oil-immersed transformers on the simulation results. First, a 2D axisymmetric transformer model was established in ANSYS to study the effect of low-voltage winding turn-to-turn insulation on the magnetic field simulation results. The differences of eddy current losses in the simulation were also calculated in terms of the magnetic field simulation results. It is found that the turn-to-turn insulation does not affect the magnetic field distribution in evidence from the simulation results. Besides, the values of the magnetic field and eddy current loss appear significant differences only at both ends of the low-voltage winding. Second, the fluid-temperature field of the transformer was solved in Fluent and the turn-to-turn insulation was the controlled objective in the solution process with consideration of the difference in winding losses. The simulation results show that the turn-to-turn insulation of the winding does not change the oil flow distribution in simulation. The simulation model with turn-to-turn insulation appears a gradient in the temperature distribution of the discs and a rise in the overall temperature distribution. Moreover, this paper analyzes the possible reasons for the differences in the simulation results of the magnetic and temperature fields caused by the turn-to-turn insulation. Some results and conclusions in this paper can be used in related studies and designs.

In large polymer electrolyte membrane (PEM) fuel cell stacks, monitoring and control of the local changes in membrane humidity inside the cathode channel is critical. In this study, a control-oriented dynamic model capable of describing the spatial distribution of voltage and relative humidity (RH) in a large fuel cell stack is developed and experimentally validated. The model tracks energy and mass flow inside the cathode, anode, and coolant channels, as well as the fuel cell stack body. Validation tests show that the model agrees well with the experimental data. The new modeling framework developed in this study can be used to predict the localized effects of humidity on the performance of a fuel cell stack. Also, given its accurate prediction of RH in the stack, this model can be used as an observer to predict local humidity variations that are, otherwise, not available. This capability would allow PEM fuel cells to avoid membrane damage due to low operating humidities as well as efficiency losses due to catalyst layer flooding.

Cu(In,Ga)Se-2-based solar cells buffered with indium sulfide grown by numerous techniques have reached efficiencies comparable to those achieved by standard devices buffered with (CBD)CdS. The present paper firstly recalls some of the properties of the indium sulfide single crystal and Points Out the disagreements concerning the thin films properties inventoried in the literature. Secondly, the influence of the presence of some "foreign elements" within file indium sulfide on its properties is presented. It is shown that these "foreign elements", even at low concentration levels, are possibly at the origin or the thin films properties deviations compared to the single crystal. The impact of these contaminants on the solar cells performance is finally discussed.

Abstract This paper describes a computer simulation model constructed in the summer of 2000. It was used to simulate the general patterns of power plant construction that might appear in an electric system with approximately the same loads, resources and markets as those in California. The paper begins with background on restructuring in California and a review of previous research on construction. The paper then describes the computer model by presenting several simulations with qualitatively different patterns of construction. The simulations reveal that construction could appear in a steady, even fashion, causing power plants to come on line exactly in time to meet the profitability goals of investors. But this is not the dominant pattern. The more likely pattern shows construction lagging behind the growth in demand, allowing prices to climb to surprisingly high values during peak periods in the summer. When new power plants are completed, they come on line in great numbers causing a bust in wholesale prices. The boom/bust pattern of construction is common in industries such as commodities and real estate, and there are good reasons to believe that a boom could appear in the electric industry. Electricity consumers would certainly benefit from a boom in construction. Unfortunately, waiting for the boom is a difficult challenge with the current mix of state and federal rules in California. The paper concludes with a summary of recent events that have led to the demise of the California approach to deregulation and to the state's entry into the power business.