• Energy Research
• 12. Responsible consumption close
• 6. Clean water close
• CN close
• US close
• PT close

Abstract An international workshop was held in Richland, Washington, United States of America, in October, 1980 to discuss progress on development of the acid digestion process for treating combustible nuclear waste. The workshop was attended by participants from nine member countries of the Nuclear Energy Agency of the Organization for Economic Cooperation and Development (OECD/NEA). The status of the acid digestion development programs of various countries is discussed in this paper. The acid digestion process has been developed and demonstrated on an engineering scale in several countries and appears to be especially applicable to treatment of combustible wastes containing high levels of transuranic contamination, where there is potential for recovering the transuranic radionuclides. Because the process takes place at a relatively low temperature, the plutonium contained in the residue is in a form that can be readily recovered using standard leaching techniques. The process is adaptable to a wide variety of combustible wastes, such as cellulosics, plastics, rubber materials, and ion exchange resin. While the process has been developed and demonstrated on an engineering scale primarily for transuranic contaminated wastes, the process is also adaptable to beta-gamma wastes such as reactor ion exchange resins.

Abstract The Renewable energy power generation capacity has been rapidly increasing in China recently. Meanwhile, the contradiction between power supply and demand is becoming increasingly more prominent due to the intermittence of renewable energies. On the other hand, on the mitigation of carbon dioxide (CO2) emissions in China needs immediate attention. Power-to-Gas (PtG), a chemical energy storage technology, can convert surplus electricity into combustible gases. Subsurface energy storage can meet the requirements of long term storage with its large capacity. This paper provides a discussion of the entire PtG energy storage technology process and the current research progress. Based on the comparative study of different geological storage schemes for synthetic methane, their respective research progress and limitations are noted. In addition, a full investigation of the distribution and implementation of global PtG and CO2 capture and storage (CCS) demonstration projects is performed. Subsequently, the opportunities and challenges of the development of this technology in China are discussed based on techno-economic and ecological effects analysis. While PtG is expected to be a revolutionary technology that will replace traditional power systems, the main issues of site selection, energy efficiency and the economy still need to be adequately addressed. Additionally, based on the comprehensive discussion of the results of the analysis, power-to-gas and subsurface energy storage implementation strategies, as well as outlook in China are presented.

A natural holm oak forest was selectively thinned to test thinning as a tool to reduce tree mortality, increase productivity, and reverse the recent regression of the dominant species (Quercus ilex) induced by climate change. Thinning increased aboveground productivity and reduced stem mortality in this Mediterranean forest during four years just after thinning, contributing to the maintenance of forest functioning under changing climatic conditions. Q. ilex was the only species positively affected by the thinning: stem growth increased for all stem sizes, and mortality was significantly lower in thinned plots. On the contrary, mortality rates of Phillyrea latifolia and Arbutus unedo were not significantly lower. Stem growth increased for P. latifolia only in the smallest stem-size class. Our results highlight the suitability of selective thinning for improving the forest productivity and ensuring the conservation of Mediterranean coppices. Other benefits of selective thinning, such as a decrease in the risk of fire dispersion and an increase in the water supply for human populations, are also discussed.

Abstract The 2013/2017 Nankai Trough (Japan) and 2017 Shenhu Area (China) offshore methane hydrate production tests showed the world the possibility and feasibility of the oceanic methane hydrate production by depressurization. However, the relatively low gas production rate still remained as one of the critical bottlenecks for the economical utilization. This study chose the Nankai Trough as a target area, and aimed at the gas recovery enhancement from the methane hydrate reservoir using vertical wells. A traditional single-vertical-well system and a new dual-vertical-well system were proposed, and special production strategies of the aggressive depressurization and permeability improvement were applied to these two systems for the effectiveness verification. Based on the 15-year simulation results, it was found that the middle low-permeability silt-dominated layers in the reservoir held the key to the gas recovery enhancement, and for the single-vertical-well system, the permeability improvement in this sublayer seemed more reliable and feasible than the aggressive depressurization. On the other hand, the dual-vertical-well system significantly exceeded the single-vertical-well system due to the synergistic effect of the two wellbores, and could raise the average gas production rate (9.5 × 103 m3/day) by one order of magnitude (to 7.9 × 104 m3/day). Moreover, if this new system was combined with the aggressive depressurization, the average gas production rate could be further raised by one order of magnitude (to 3.4 × 105 m3/day).

Abstract Kenya has made considerable policy efforts to expand its renewable energy portfolio to meet energy demand and mitigate greenhouse gas (GHG) emissions. Development of proper policies requires a robust framework for analyzing the benefits of renewable energy investments. Towards this end, this study applied a choice experiment analysis to determine how attributes (type of energy, ownership, impact on environment, distance and visibility, community job creation, and yearly renewable energy tax) impact the public willingness to pay for renewable energy development in Kenya. A nationwide survey of 1020 households was conducted in nine counties using conditional logit (MNL) and random parameter logit (RPL) frameworks. The results reveal that the Kenyan public places a high value on environmental impact, followed by type of renewable energy and community job creation, respectively. On the other hand, respondents do not place much emphasis on ownership or distance and visibility. Policy simulation suggests that while renewable energy adoption is highly valued by households, the total willingness to pay is not enough to cover the higher capital cost for the development of various renewable energy technologies.

Integrated assessment models (IAMs) are playing an increasingly important role in long-run sustainability analysis. At their core is a set of global economic and environmental accounts which capture a complete set of inter-industry and inter-regional relationships in the global economy in a consistent manner. While much attention is focused on the raw data and parameterization required to expand or add sectoral detail to IAMs, only rarely is there discussion of how different matrix balancing methods (i.e. translating disparate raw data sources into the consistent database) affect modeling results. This article offers an in-depth look into the database–modeling nexus in IAMs, focusing on the electric power sector which is both a major source of CO2 emissions and a critical vehicle for climate change mitigation. Comparisons of the prevailing matrix balancing algorithms show how the choice of database reconciliation methodology affects modeling results using policy-relevant simulations in the context of the electric power sector. The resulting insights can be applied to the disaggregation of other, technology rich sectors in the economy. We conclude that appropriate selection of database reconciliation methodologies can reduce the deviation between bottom-up and top-down modeling.

AbstractA bioreactor system composed of a stirred tank and three tubular bioreactors in series was established, and continuous ethanol fermentation was carried out using a general Saccharomyces cerevisiae strain and a very high gravity medium containing 280 g L−1 glucose, supplemented with 5 g L−1 yeast extract and 3 g L−1 peptone. Sustainable oscillations of glucose, ethanol, and biomass were observed when the tank was operated at the dilution rate of 0.027 h−1, which significantly affected ethanol fermentation performance of the system. After the tubular bioreactors were packed with 1/2″ Intalox ceramic saddles, the oscillations were attenuated and quasi‐steady states were achieved. Residence time distributions were studied for the packed bioreactors by the step input response technique using xylose as a tracer, which was added into the medium at a concentration of 20 g L−1, indicating that the backmixing alleviation assumed for the packed tubular bioreactors could not be established, and its contribution to the oscillation attenuation could not be verified. Furthermore, the role of the packing's yeast cell immobilization in the oscillation attenuation was investigated by packing the tubular bioreactors with packings with significant difference in yeast cell immobilization effects, and the experimental results revealed that only the Intalox ceramic saddles and wood chips with moderate yeast cell immobilization effects could attenuate the oscillations, and correspondingly, improved the ethanol fermentation performance of the system, while the porous polyurethane particles with good yeast cell immobilization effect could not. And the viability analysis for the immobilized yeast cells illustrated that the extremely lower yeast cell viability within the tubular bioreactors packed with the porous polyurethane particles could be the reason for their inefficiency, while the yeast cells loosely immobilized onto the surfaces of the Intalox ceramic saddles and wood chips could be renewed during the fermentation, guaranteeing their viability and making them more efficient in attenuating the oscillations. The packing Raschig rings without yeast cell immobilization effect did not affect the oscillatory behavior of the tubular bioreactors, further supporting the role of the yeast cell immobilization in the oscillation attenuation. Biotechnol. Bioeng. 2009;102: 113–121. © 2008 Wiley Periodicals, Inc.

AbstractIn Laurentian Great Lakes coastal wetlands (GLCWs), dominant emergent invasive plants are expanding their ranges and compromising the unique habitat and ecosystem service values that these ecosystems provide. Herbiciding and burning to control invasive plants have not been effective in part because neither strategy addresses the most common root cause of invasion, nutrient enrichment. Mechanical harvesting is an alternative approach that removes tissue‐bound phosphorus and nitrogen and can increase wetland plant diversity and aquatic connectivity between wetland and lacustrine systems. In this study, we used data from three years of Great Lakes‐wide wetland plant surveys, published literature, and bioenergy analyses to quantify the overall areal extent of GLCWs, the extent and biomass of the three most dominant invasive plants, the pools of nitrogen and phosphorus contained within their biomass, and the potential for harvesting this biomass to remediate nutrient runoff and produce renewable energy. Of the approximately 212,000 ha of GLCWs, three invasive plants (invasive cattail, common reed, and reed canary grass) dominated 76,825 ha (36%). The coastal wetlands of Lake Ontario exhibited the highest proportion of invasive dominance (57%) of any of the Great Lakes, primarily from cattail. A single growing season's biomass of these invasive plants across all GLCWs was estimated at 659,545 metric tons: 163,228 metric tons of reed canary grass, 270,474 metric tons of common reed, and 225,843 metric tons of invasive cattail, and estimated to contain 10,805 and 1144 metric tons of nitrogen and phosphorus, respectively. A one‐time harvest and utilization for energy of this biomass would provide the gross equivalent of 1.8 million barrels of oil if combusted, or 0.9 million barrels of oil if converted to biogas in an anaerobic digester. We discuss the potential for mitigating non‐point source nutrient pollution with invasive wetland plant removal, and other potential uses for the harvested biomass, including compost and direct application to agricultural soils. Finally, we describe the research and adaptive management program we have built around this concept, and point to current limitations to the implementation of large‐scale invasive plant harvesting.